Introduction
The SucceBuy Professional Rechargeable Metal Detector (Model TS185A) is designed for precise and efficient metal detection across various environments, including underwater. Featuring an upgraded DSP chip, a 12-inch IP68 waterproof search coil, and an adjustable handle, this device is equipped to help you discover hidden treasures with ease. Its seven distinct detection modes cater to a wide range of search scenarios, from finding lost items to exploring for valuable metals.
Package Contents
Upon unboxing, please ensure all the following items are present:
- 1 x SucceBuy Professional Rechargeable Metal Detector (Model TS185A)
- 1 x 12-inch Search Coil with Coil Protection Cover
- 1 x Handbag
- 1 x Digging Shovel
- 1 x Battery Charger
- 1 x Bluetooth Headset
- 1 x Precision Locator
- 4 x Rechargeable 1.5V Batteries
- 1 x User Manual (this document)
Specifications
| Feature | Detail |
|---|---|
| Item Model Number | TS185A |
| Voltage | 6.8-9.6V |
| Frequency | 7.2 kHz |
| Handle Length | 39-50 in (100-127 cm) |
| Search Coil Diameter | 12 in (30 cm) |
| Detection Depth | Up to 12 in (30 cm) |
| Search Coil IP Rating | IP68 |
| Submersible Depth | Up to 10 ft (3 m) |
| Noise Level | ≥ 75 dB |
| Audio Frequency | 400-1200 Hz |
| Sensitivity | ≤30 cm |
| Working Environment | -10℃ to 50℃ |
| Material | ABS |
| Net Weight | 3.2 kg (7.05 lbs) |
| Product Type | Submersible Metal Detector |
| Package Size | 27.56 x 11.81 x 4.72 in (700 x 300 x 120 mm) |
| Battery Included | Yes |
| LCD Screen | Yes |
| Power Type | Rechargeable |
| Certification | CE |
| DIY Supplies | Metalworking |
Setup and Assembly
Follow these steps to assemble your metal detector:
- Attach the Search Coil: Secure the 12-inch search coil to the lower stem using the provided fasteners. Ensure the coil protection cover is already on the search coil.
- Connect the Lower and Upper Stems: Insert the lower stem into the upper stem and secure it.
- Adjust Handle Length: Extend or retract the adjustable handle to your preferred length (between 39 and 50 inches) for comfortable operation.
- Mount the Control Unit: Attach the control unit to the upper stem.
- Connect Cables: Carefully connect the search coil cable to the control unit. Ensure a snug fit to maintain waterproof integrity.
- Insert Batteries: Open the battery compartment on the control unit and insert the four 1.5V rechargeable batteries. Close the compartment securely.
- Connect Headphones: Plug in the Bluetooth headset to the designated port on the control unit for clear audio signals.
Operating Instructions
Powering On and Basic Operation
- Power On: Press and hold the power button on the control unit until the LCD screen illuminates.
- Initial Settings: The detector will typically start in "All Metals" mode. Adjust sensitivity and volume as needed using the control panel buttons.
- Sweeping: Hold the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping motions.
- Signal Indication: When a metal object is detected, the detector will emit an audible beep through the headset, and the LCD screen will display information about the detected object, including its depth and potential identification.
Detection Modes
The TS185A offers seven specialized detection modes to optimize your search:
- All Metals Mode: Detects all types of metal without discrimination. Ideal for general searching or when you're unsure of the target.
- Pinpoint Mode: Helps to precisely locate the exact position of a detected target before digging.
- Jewelry Mode: Optimized for finding jewelry, discriminating against common iron debris.
- Coins Mode: Designed to identify coins, filtering out smaller, less valuable metal objects.
- Debris Mode: Focuses on detecting various metallic debris, useful for clearing an area or identifying specific types of scrap metal.
- Ornaments Mode: Similar to Jewelry mode, but may have different discrimination settings for various decorative metal items.
- Custom Mode: Allows you to set your own discrimination patterns and sensitivity levels for specific search requirements. Refer to the on-screen menu for customization options.
Underwater Operation
The TS185A metal detector features an IP68 waterproof rating, allowing the search coil to be fully submerged up to 10 feet (3 meters) underwater. Ensure all connections are secure before submerging any part of the detector. The control unit is also designed to be waterproof for shallow submersion, but always exercise caution.
Maintenance
- Cleaning: After each use, especially in wet or sandy conditions, wipe down the search coil and stem with a damp cloth. For the control unit, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Care: Always use the provided rechargeable batteries and charger. Ensure batteries are fully charged before extended use. If storing the detector for a long period, remove the batteries.
- Storage: Store the metal detector in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying bag for protection during transport and storage.
- Coil Protection: Keep the coil protection cover on the search coil to prevent scratches and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Detector won't turn on | Dead batteries; Incorrect battery insertion; Loose connections. | Ensure batteries are fully charged and correctly inserted. Check all cable connections. |
| Erratic signals/False readings | High sensitivity setting; Electromagnetic interference; Mineralized ground; Nearby metal objects. | Reduce sensitivity. Move away from power lines or other electronic devices. Try ground balancing if available (refer to Custom Mode). |
| No detection of known metal objects | Wrong detection mode; Low sensitivity; Object too deep; Faulty coil connection. | Switch to "All Metals" mode. Increase sensitivity. Ensure the object is within detection depth. Check coil cable connection. |
| Headphones not working | Headphones not plugged in correctly; Faulty headphones; Volume too low. | Ensure headphones are fully plugged in. Check volume settings. Test with another audio device if possible. |
User Tips
- Practice Makes Perfect: Before heading out for a serious hunt, practice in a known area with various metal objects buried at different depths to get familiar with the detector's responses.
- Ground Balance: For optimal performance in varying soil conditions, especially highly mineralized ground, utilize the ground balance feature (if available in Custom Mode) to reduce false signals.
- Saltwater Use: While the search coil is IP68 waterproof and submersible, saltwater can cause false signals due to its conductivity. Use lower sensitivity settings or specific saltwater modes if available, and always rinse the coil thoroughly with fresh water after saltwater use.
- Target Identification: Pay attention to the LCD display's target ID numbers and audio tones. Over time, you'll learn to differentiate between various metals without needing to dig.
- Battery Life: Always carry fully charged spare batteries or a power bank for the charger, especially during long expeditions.
Warranty and Support
SucceBuy products are manufactured to high-quality standards. For any technical assistance, warranty claims, or support inquiries, please refer to the contact information provided on the product packaging or the official SucceBuy website. Keep your purchase receipt as proof of purchase.
