Introduction
Thank you for choosing the FOXBOX Men's Dual Display Sport Watch. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.
Image: Front view of the FOXBOX Men's Dual Display Sport Watch with blue accents.
Key Features
- Dual Time Display (Analog and Digital)
- Stopwatch Function
- Calendar (Day-Month and Day of the Week)
- Alarm and Hourly Chime
- LED Backlight
- 12/24 Hour Format Selection
- Shock Resistant
- Luminous Hands and Markers
- Water Resistance: 5ATM (50 meters)
Setup and Initial Adjustment
Before using your watch, familiarize yourself with the buttons and their functions:
Image: Diagram illustrating the function of each button on the watch face.
- Light Button: Activates the LED backlight for visibility in low-light conditions.
- Mode Button: Cycles through different digital display modes (Time, Alarm, Stopwatch, etc.).
- ST-STP Button (Start/Stop): Used to start and stop the stopwatch function.
- Reset Button: Resets the stopwatch or adjusts settings in certain modes.
- Adjust the Time Crown: Pull out the crown to adjust the analog time.
- Date/Week Display: Digital display shows the current date and day of the week.
- Seconds Display: Digital display shows seconds.
Adjusting Analog Time:
- Gently pull out the crown located on the right side of the watch.
- Rotate the crown to move the hour and minute hands to the desired time.
- Once set, push the crown back in to secure the time and start the analog movement.
Adjusting Digital Time and Calendar:
Image: Detailed view of the digital display features and adjustment points.
- Press the 'Mode' button repeatedly until you reach the time setting mode (usually indicated by flashing digits).
- Use the 'Reset' button to select the digit you wish to adjust (hours, minutes, 12/24H format).
- Use the 'ST-STP' button to increase the value of the selected digit.
- Continue pressing 'Mode' to cycle through date, month, and day of the week settings, adjusting each with 'Reset' and 'ST-STP'.
- Once all settings are correct, press 'Mode' again to exit the setting mode.
Operating Instructions
Using the Stopwatch:
- Press the 'Mode' button until the stopwatch display appears (usually '00:00:00').
- Press the 'ST-STP' button to start the stopwatch.
- Press 'ST-STP' again to pause the stopwatch.
- Press the 'Reset' button to clear the stopwatch to zero.
Setting the Alarm:
- Press the 'Mode' button until the alarm setting display appears.
- Use the 'Reset' button to select the hour or minute digits.
- Use the 'ST-STP' button to adjust the alarm time.
- Press 'Mode' to confirm and exit.
- To activate/deactivate the alarm, typically a short press of the 'ST-STP' button while in alarm mode will toggle it.
Using the Backlight:
Press the 'Light' button (top left) to illuminate the digital display for a few seconds.
Care and Maintenance
Water Resistance:
Your FOXBOX watch is rated 5ATM (50 meters) water resistant. This means it is suitable for daily use, including splashes, rain, and hand washing. It can also withstand showering and swimming in shallow water. However, it is crucial to:
- DO NOT press any buttons while the watch is submerged in water.
- DO NOT expose the watch to hot water, as this can compromise the seals.
- NOT suitable for strenuous exercise in water, shallow diving, or deep diving.
Image: Table detailing suitable activities for various water resistance ratings.
| Water Resistance | Water Drop | Rain | Car Wash | Shower | Swim | Strenuous Exercise | Shallow Dive | Diving Depth |
|---|---|---|---|---|---|---|---|---|
| 3ATM (30m) | β | β | ||||||
| 5ATM (50m) | β | β | β | β | β | |||
| 10ATM (100m) | β | β | β | β | β | β | β |
Cleaning:
Wipe the watch regularly with a soft, dry cloth. For the silicone strap, you can use a mild soap solution and rinse thoroughly, ensuring no water enters the watch case.
Battery:
The watch uses an imported movement and a powerful battery designed for long-lasting operation. When the battery needs replacement, it is recommended to take it to a professional watch repair service to ensure proper sealing and water resistance are maintained.
Troubleshooting
- Digital display is blank: The battery may be low or depleted. Consider professional battery replacement.
- Analog hands not moving: Ensure the crown is fully pushed in. If it still doesn't move, the battery may be low or there could be a mechanical issue.
- Time is inaccurate: Re-adjust both analog and digital times as per the 'Setup' section. If inaccuracy persists, the watch may require servicing.
- Water inside the watch: If you notice condensation or water droplets inside the watch, stop using it immediately and take it to a professional for inspection and repair to prevent further damage.
Specifications
Image: Diagram detailing the physical dimensions and core materials of the watch.
| Attribute | Detail |
|---|---|
| Brand Name | FOXBOX |
| Model Number | Men Watch 0033 |
| Item Type | Quartz Wristwatches |
| Movement | Quartz, Dual Display, Digital (Electronic) |
| Water Resistance Depth | 5Bar (50 meters) |
| Case Material | Stainless steel |
| Case Shape | Irregular Shape |
| Case Thickness | 17mm |
| Dial Window Material Type | Hardlex |
| Band Material Type | Silicone |
| Band Length | 24cm |
| Band Width | 30mm |
| Clasp Type | Buckle (Pin buckle) |
| Weight | 100g |
| Display Type | Arabic Numeral Markers |
| Battery Included | Yes |
| Certification | CE |
Warranty and Support
Your FOXBOX watch comes with a 12-month warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear. For warranty claims or technical support, please contact the seller or authorized service center.
Please retain your proof of purchase for any warranty claims.
User Tips
- To maximize battery life, avoid unnecessary use of the backlight.
- Regularly clean your watch, especially the silicone strap, to prevent dirt buildup and maintain comfort.
- Always ensure the crown is fully pushed in after adjusting the time to maintain water resistance.
- If you travel across time zones, remember to adjust both the analog and digital displays for accurate local time.
