1. Introduction
The CRYOPUSH Cold Therapy Physiotherapy Equipment is designed to facilitate faster recovery and provide relief from pain and swelling. This system utilizes cold compression therapy, based on the RICE (Rest, Ice, Compression, Elevation) principle, to address a range of issues including sports injuries, post-surgical recovery, strained tendons or muscles, osteoarthritis, muscle tension, injured ligaments, and fatigue.
By targeting the exact pain source with effective cold compression, the Cryo Push system offers extended relief and supports the healing process.
2. Important Safety Information
Please read all instructions and safety warnings carefully before using this product. Failure to do so may result in injury or damage to the device.
- Consult a physician before using this device, especially if you have pre-existing medical conditions, circulatory problems, nerve damage, or are pregnant.
- Do not apply the cold compression wrap directly to open wounds, broken skin, or areas with compromised sensation.
- Monitor your skin regularly for any signs of irritation, frostbite, or adverse reactions during and after use. Discontinue use immediately if discomfort occurs.
- Do not over-tighten the compression wrap, as this can restrict blood flow.
- Use only the power adapter and batteries provided or recommended by the manufacturer.
- Keep the device and its components out of reach of children and pets.
- Do not immerse the pump unit in water or other liquids.
- Ensure the device is used in a well-ventilated area.
3. Package Contents
Verify that all items are present in your package:
- Cryo Push Pump Unit
- Applicator Wrap (e.g., Knee, Ankle, Shoulder, or Elbow wrap, depending on your purchase)
- Power Adapter
- Rechargeable Batteries (2 x 2500mAh)

Figure 1: Cryo Push System Components
4. Product Overview
4.1 Pump Unit Features
- Compression: Combines cryotherapy and compression for effective pain relief and muscle recovery.
- Portable: Compact size and battery operation allow for ultimate portability and convenience.
- Dual Use: Equipped with two ports, enabling simultaneous treatment of two body parts.
- Various Treatment Options: Compatible with four different body wraps (Shoulder, Elbow, Knee, Ankle) for targeted therapy.
- Easy to Use: Simple controls for hassle-free operation.
- Safety Feature: Includes a 30-minute auto shut-off function for safe treatment durations.
4.2 Wrap Features
- More Effective: Designed with grid gel packs and a larger size for enhanced therapeutic effect.
- Rotating Design: Tubing allows for free movement without kinking or leaking.
- Waterproof Exterior: Made with waterproof material, easy to clean, and reduces condensate.
- Anatomy Design: Ergonomically shaped for comfortable wear and optimal fit.
- Durable Materials: Constructed from comfortable and dirt-proof fabric.

Figure 2: Pump Features and Available Wraps

Figure 3: Wrap Features
5. Setup Instructions
- Charge Batteries / Connect Power: Insert the two rechargeable batteries into the pump unit. Alternatively, connect the power adapter to the pump unit and plug it into a wall outlet. Ensure the unit is powered before use.
- Prepare the Wrap: If using a gel pack, ensure it is adequately chilled according to your therapy needs. Insert the gel pack into the designated pocket of the applicator wrap.
- Connect Wrap to Pump: Locate the two hose connectors on the wrap. Insert these connectors firmly into the corresponding holes marked 'P1' and 'P2' on the pump controller. Ensure a secure connection to prevent leaks.
- Apply the Wrap: Position the wrap comfortably and securely around the target body part (e.g., knee, ankle, shoulder, arm). Use the adjustable straps to ensure a snug but not overly tight fit.

Figure 4: Connecting the Wrap and Wrap Details
6. Operating Instructions
- Power On: Press the power button on the pump unit to turn it on. The display will illuminate.
- Select Pressure Setting: Use the pressure control buttons (P1/P2 or similar markings) to cycle through the five available pressure settings, ranging from 20mmHg to 100mmHg. Choose a comfortable and effective compression level.
- Start Treatment: Once the desired pressure is set, the device will begin the cold compression cycle. The system is designed for intermittent compression.
- Dual Treatment (Optional): If treating two body parts simultaneously, connect a second wrap to the available port (P2) and adjust its settings as needed.
- Automatic Shut-off: The device features a 30-minute auto shut-off function. After 30 minutes, the unit will automatically power down. You may restart the session if further therapy is required, ensuring to monitor skin condition.
- Power Off: To manually end a session, press the power button again.
6.1 Application Areas

Figure 5: Common Application Areas

Knee Application

Ankle Application

Shoulder Application

Arm Application
7. Maintenance
7.1 Cleaning the Wraps
The wraps feature a waterproof exterior, making them easy to clean. After each use, wipe down the exterior of the wrap with a damp cloth and mild soap if necessary. Ensure the wrap is completely dry before storing. Do not machine wash or tumble dry the wraps.
7.2 Cleaning the Pump Unit
Wipe the pump unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
7.3 Battery Care
To prolong battery life, fully charge the batteries before first use and whenever the battery indicator is low. If storing the device for an extended period, remove the batteries and store them in a cool, dry place.
7.4 Storage
Store the Cryo Push system in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all components are clean and dry before storage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump unit does not power on. | Low or uncharged batteries; Power adapter not connected or faulty. | Ensure batteries are charged or connect the power adapter securely. Try a different power outlet. |
| No compression or weak compression. | Hose connectors not securely attached; Wrap not properly applied; Leak in the system. | Check that both hose connectors are firmly inserted into the pump. Re-apply the wrap to ensure a snug fit. Inspect hoses and wrap for any visible damage or leaks. |
| Device shuts off unexpectedly before 30 minutes. | Low battery power. | Recharge or replace batteries. Ensure the power adapter is connected if using directly from an outlet. |
| Discomfort or skin irritation during use. | Wrap too tight; Cold temperature too low; Allergic reaction. | Loosen the wrap. Reduce the cold temperature (if adjustable) or shorten treatment time. Discontinue use and consult a physician if irritation persists. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | A02-C-006 |
| Product Name | CRYOPUSH cold compression wrap |
| Color | Grey |
| Pressure Range | 20-100mmHg (5 settings) |
| Power | 5.5 W |
| Battery | 2 x 2500mAh |
| Pump Dimension (L*W*H) | 190*90*30mm |
| Net Weight (Pump) | 350g |
| Input | 100-240V, 50-60Hz |
| Warranty | 1 Year |
| Properties | Rehabilitation Therapy Supplies |
10. User Tips
- For maximum cold therapy effect, ensure your gel packs are thoroughly pre-chilled in a freezer for several hours before use.
- Always ensure the wrap is applied snugly but comfortably. A proper fit is crucial for effective compression and cold transfer.
- Consider using a thin cloth barrier between the cold pack and your skin, especially for sensitive areas or prolonged sessions, to prevent frostbite.
- Regularly check the hose connections to the pump and wrap to ensure they are secure and free from kinks, which can affect compression.
- If using the device for post-exercise recovery, apply it as soon as possible after your activity for optimal results.
11. Warranty and Support
11.1 Warranty Information
This Cryo Push Cold Therapy Physiotherapy Equipment comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
11.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.





