1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Jiuyin ADAS HD USB DVR Dash Camera. This device is designed to enhance your driving safety by providing advanced driver-assistance systems (ADAS) and recording high-definition video directly to your Android car radio or navigation system.
2. Product Overview
2.1. Components
The Jiuyin ADAS HD USB DVR Dash Camera is a compact unit designed for seamless integration with compatible Android car multimedia systems.
Figure 2.1: Front view of the Dash Camera, highlighting the lens.
Figure 2.2: Side view of the Dash Camera, showing the memory card slot.
2.2. Key Features
- ADAS (Advanced Driver-Assistance Systems): Includes Front Anti-Collision Warning (FCW) and Front Car Start Reminder (FVSA).
- High-Definition Recording: 1920x1080 camera resolution at 30 frames per second.
- Wide View Angle: 170° lens captures a broad perspective of the road.
- G-Sensor: Automatically detects sudden shakes or collisions and locks the footage.
- Max External Memory: Supports up to 32GB Micro SD/TF card (Class 10 recommended).
- USB Connectivity: Designed for direct connection to Android 4.0 and above car multimedia units.
- Removable Battery: For flexible power management.
- OSD Language: English.
3. Setup and Installation
3.1. Connecting the DVR to your Android Player
The Jiuyin ADAS DVR is designed to connect via USB to your Android car radio or navigation system. Ensure your Android unit is running Android 4.0 or above for compatibility.
Figure 3.1: Connect the DVR to your Android Player using the provided USB cable. Only Android 4.0+ units are supported.
3.2. APP Installation on Android Player
Follow these steps to install the necessary application on your Android car multimedia system:
- Connect the DVR to your Android Player via a USB port.
Figure 3.2: DVR connected to Android Player via USB.
- Open the "File Manager" application on your Android Player.
Figure 3.3: Locating and opening the File Manager app.
- Navigate to the USB drive (often labeled "CAR_DVR USB drive") and click on the ".apk" file to initiate the installation.
- Once the installation is complete, open the newly installed "HD DVR" application.
Figure 3.4: Installing the APK and launching the HD DVR app.
3.3. Product Interface Description
The JIUYIN Android Car Radio unit features several interfaces for connectivity. For a visual diagram, please refer to the full user manual PDF.
The car radio unit typically includes the following interfaces:
- 4P USB / 6P USB: For connecting USB devices, including the DVR.
- Canbus interface: For integrating with vehicle's CANBUS system.
- Rear view: Input for a rear view camera.
- Audio and video interface: For multimedia connections.
- Radio / ANT: Antenna connections.
- GPS interface: For GPS antenna connection.
- 4G antenna interface: For 4G connectivity.
- Power interface: Main power connection.
- Fuse: Integrated fuse for protection.
Important Notes for Connection:
- Always plug in the correct connector according to the guide. Incorrect connections may prevent the screen from working.
- If the screen does not turn on, check if the fuse is blown. A blown fuse often indicates a wrong wire connection, as the fuse acts as a protective measure for the motherboard.
3.4. Rear View Camera Wiring
If you are installing an optional rear view camera, follow these wiring instructions. Note that the rear view camera is not standard and needs to be purchased separately. For a detailed visual wiring diagram, please refer to the full user manual PDF.
- Connect the red wire from the camera to the positive pole of the reversing light.
- Connect the black wire from the camera to ground.
- Connect the red wire from the camera's video cable to the reversing control wire of the car radio unit.
- Identify the third reversing control line (with labels and descriptions) on the power cord of your car radio. This is typically found by counting past the third wire from the black wire on the power connector.
3.5. Steering Wheel Control Settings
Configuring steering wheel controls depends on whether your power cord includes a CANBUS decoder box:
- Without CANBUS: If your power cord does not include a CANBUS decoder box, you can set up the learning steering wheel control buttons directly on the screen of your Android player.
- With CANBUS: If your power cable includes a CANBUS decoder box, you will need to set up CANBUS to decode the original steering wheel controls. This usually requires entering the factory settings. Please contact customer service for assistance with this step.
3.6. CANBUS Decoder Box Instructions
If your system uses a CANBUS decoder box, please observe the following. For a visual reference of the decoder box and its connections, please refer to the full user manual PDF.
- If your power cord does not include CANBUS, you can disregard this section.
- CANBUS requires proper setup to function correctly. Contact customer service for guidance on setting up CANBUS for decoding original car information.
- Ensure the CANBUS wires are connected correctly. Do not plug the connector that connects CANBUS into the back connector of the main unit. Only connect the 8P connector. Incorrect connection may prevent the screen from working.
4. Operating Instructions
4.1. ADAS Driving Warning System
The ADAS system provides real-time driving assistance to enhance safety.
Figure 4.1: ADAS Driving Warning interface on car radio display, illustrating Front Collision Warning System (FCWS) and Lane Departure Warning System (LDWS).
Figure 4.2: In-car view of the DVR display showing a "Be careful collision" warning.
4.2. FCW (Front Anti-Collision Warning)
The FCW system calculates the distance and real-time speed between your car and the preceding vehicle using the host lens video and a core ADAS algorithm. An alarm is issued when a potential danger is detected.
Figure 4.3: Visual representation of FCW in action, showing distance detection and warning indicators.
| System startup speed | Default warning speed | Applicable conditions | Performance degradation | Highest early warning time |
|---|---|---|---|---|
| Greater than 5km/h | Greater than 30km/h | Day, night, rain and snow, smog | Greater than, fog, heavy snow, backlighting, entering and leaving the tunnel, the opposite vehicle, the camera pitch angle is too large | 2.5s |
4.3. FVSA (Front Car Start Reminder)
The FVSA system reminds you when the front car has started moving, especially useful when you might be distracted at traffic lights. The ADAS recorder scans the image and sends a message with a voice reminder.
Figure 4.4: Visual representation of FVSA in action, showing a voice reminder when the front car starts.
| System startup speed | Default warning speed | Applicable conditions | Performance degradation | Prompt delay time |
|---|---|---|---|---|
| Less than 5km/h | Less than 1km/h | Day, night, rain and snow, smog | The front car is too far away, the front car is tilted forward, and the camera pitch angle is too large | 1s |
4.4. G-Sensor Functionality
The built-in G-Sensor automatically detects sudden movements, impacts, or rapid deceleration/acceleration. When such an event occurs, the current video segment is automatically locked to prevent it from being overwritten, ensuring critical footage is preserved.
5. Maintenance
- Cleaning: Regularly clean the camera lens with a soft, lint-free cloth to ensure clear recordings. Avoid abrasive cleaners.
- Firmware Updates: Check with the manufacturer's support channels for any available firmware updates to ensure optimal performance and access to new features.
- Memory Card: Periodically format your Micro SD/TF card (e.g., once a month) to maintain its performance and prevent data corruption. Back up any important footage before formatting.
- Connection Integrity: Ensure all USB and wiring connections remain secure to prevent intermittent operation.
6. Troubleshooting
- Problem: Screen not working or not turning on.
- Solution:
- Check all connectors to ensure they are plugged in correctly according to the installation guide. Incorrect connections can prevent the screen from functioning.
- Inspect the fuse on the power interface. If the fuse is blown, it indicates a wrong wire connection, and the fuse has acted as a protective measure. Replace the fuse and re-check wiring.
- Problem: CANBUS features (e.g., steering wheel controls) are not working.
- Solution:
- Ensure the CANBUS decoder box (if applicable) is correctly wired. Do not plug the CANBUS connector into the back connector of the main unit; only use the designated 8P connector.
- If your system uses a CANBUS decoder box, it requires specific setup within the factory settings of your Android player. Contact customer service for detailed guidance.
- Problem: Cannot install the DVR application (APK) or accidentally formatted the SD card.
- Solution:
- If the APK file is missing or corrupted, you may need to re-download it from the manufacturer's website or contact customer service for a copy.
- Always back up important files before formatting your SD card.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | JIUYIN |
| Item Type | Car DVR |
| Assembly Mode | After The Loading Machine Integrated |
| Camera Resolution | 1920x1080 |
| Frames Per Second | 30 |
| View Angle | 170° |
| Video Code | AVC |
| Screen Ratio | 16:9 |
| Number Of Lenses | 1 |
| Special Features | G-Sensor |
| Max External Memory | 32G |
| Memory Card Required Reading Speed | Class 10 |
| Interface | SD/MMC, Micro SD/TF |
| OSD Language | English |
| Battery | Removable |
| Is Batteries Included | No |
| Touch Screen | No |
| GPS logger | None |
| Original Package | Yes |
| Origin | Mainland China |
8. User Tips
- APK Backup: It's recommended to back up the DVR application (APK) file from the device's internal storage or the provided SD card to another location as soon as you install it. This way, if you accidentally format the SD card, you'll have a copy for reinstallation.
- Video Transfer: To copy videos from the SD card to your car multimedia system, use the "File Manager" application on your Android player. Navigate to the SD card, select the desired video files, and use the copy/move function to transfer them to your car's internal storage or another connected USB drive.
9. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. You can often find contact information on the product packaging or the seller's store page.
A detailed user manual in PDF format is available for further reference. You can typically find a link to this document on the product's online listing or by scanning a QR code provided with the product. For example, a PDF user manual is available at: User Manual (PDF).
The manufacturer's customer service team is available to assist you. Due to potential time differences, please be patient, and they will respond as soon as possible during working hours.
