ADA Caster Installation
Instructions

PER EACH CASTER

         
4 bolts      4 screws       8 washers

1 retrofit plate                                 1 plate caster

1. Unscrew the unit’s existing caster
2. Use the bolts and washers to fasten the retrofit plate onto the unit’s exisitng cavity

3. Use the screws and washers to fasten the new caster onto the retrofit plate

CAUTION! Never lay unit on its back! Unit should only be plugged in when it has rested in the correct upright position for at least 24 hours. Failure to meet this requirement will void warranty coverage if compressor damage ensues.

© 2021 Avantco Refrigeration

AvantcoRefrigeration.com

06/2021

Documents / Resources

ADVANTCO ADA Caster [pdf] Instruction Manual ADA Caster, ADA, Caster

References

• User Manual