acaia Titan Brew Stand-logo

acaia Titan Brew Stand User Manual

acaia Titan Brew Stand-product

Get Started

TITAN BREW STAND

Congratulations on your purchase of the Acaia Titan brew stand. This quick start guide will walk you through the basics of how to set up and use your Titan.
Made of durable aluminum alloy material, the Titan is built to the highest standards of quality. The streamlined design makes the Titan easy to disassemble, store, and clean. Form and functionality combine to offer you an entirely new experience of using brew stands. The Titan can be used in combination with Acaia scales to precisely measure the ratio between coffee and brew. Its durable design also allows it to withstand the downward force when extracting an AeroPress.

acaia Titan Brew Stand-1

Assembly Guide

acaia Titan Brew Stand-2

  1. BEGIN ASSEMBLY
    Turn the Titan upside down and use the four screws to secure the supports to the base.
    acaia Titan Brew Stand-3
  2. MOUNT THE BASE
    Fasten the filter supports to the base by using a coin to tighten the screws.
    acaia Titan Brew Stand-14
  3. ATTACH ANTI-SLIP PADS
    Remove the adhesive from the anti-slip pads. Press to attach the pads to the screw holes and corners.
    acaia Titan Brew Stand-15
  4. ASSEMBLY COMPLETE
    Turn the stand over. Ensure that the base is firmly attached.
    acaia Titan Brew Stand-16

Documents / Resources

acaia Titan Brew Stand [pdf] User Manual
Titan, Brew Stand, Titan Brew Stand

Leave a comment

Your email address will not be published.