LG 32ML5K-B Digital Signage Display Owner's Manual

Basic:
- Checking the Accessories:
- Depending on the country, the accessories included with the product may vary. Please check the package contents to ensure that all necessary accessories are present.
- Learning the Buttons:
- The buttons on the product may differ depending on the model. Here are the functions of some common buttons: – Screen Button: Changes the input signal.
- Menu Button: Opens the main menu or saves the input selection and exits the menu.
- Up/Down Buttons: Adjusts settings up and down.
- Left/Right Buttons: Moves left or right. – Info Button: Shows the signal and mode information currently set and allows the user to select a menu.

Getting Ready:
- Connecting the IR Sensors:
- To receive signals from the remote control, connect the cable to the product. Rotate the IR sensor according to horizontal or vertical use. The illustrations may differ depending on the model.
Mounting and Removing the LG Logo Bracket:
- This step applies only to some models. Follow these instructions to remove or mount the LG logo bracket:
- Removing the LG Logo

Bracket:

Place a clean cloth on the floor to protect the monitor.

Use a screwdriver to remove one screw from the LG logo bracket on the lower back of the monitor.
- Mounting the LG Logo Bracket on the Right: 1. Screw the LG logo bracket into the hole on the right side of the monitor.

Checking Before Installation:
- Installation Orientation:
- When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen. This step is applicable for ceiling or floor orientation as well.
- Installation Location:
- Follow the provided guide to choose the appropriate installation location for the product.
  Improper installation may result in product damage.
Precautions for Use:
- Dust:
- Take precautions to prevent dust accumulation on the product, as it may affect its performance. Regular cleaning is recommended.
- Afterimage:
- Avoid displaying static images for extended periods, as it may cause afterimage or screen burn-in.
Product Specifications:
- Refer to the product manual for detailed specifications of the LG Digital Signage.
License:
- The license information related to the product is provided in this section.
  Please refer to the complete user manual for more detailed instructions and additional information about the LG Digital Signage (Monitor Signage) model 32ML5K.

Please read the user manual before using this product to ensure safe and convenient use.

WARNING – This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

BASIC

NOTE

The accessories provided with your product may vary depending on the model or region.
Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
SuperSign Software & Manual
- Visit http://partner.lge.com to download the latest SuperSign software and manual.
For POE++ application, Cat5e or higher LAN cables must be used, and Cat6 and 23 AWG or higher cables are recommended.
To meet the EMI standard, for LAN cables exposed to the outside of a wall, a cable of 2 m (6.5 feet) or less in length and FTP or STP grade must be used.

When purchasing PSE equipment, it is necessary to purchase Class 6 (60 W) or higher, and for more stable performance, Class 7 (75 W) or higher is recommended. The length of the LAN cable must be 100 m (328 feet) or less. The longer the cable, the greater the power loss, so using the shortest possible cable is recommended.

Checking the Accessories

Learning the Buttons

The illustrations may differ depending on the model

: Changes the input signal.
: Opens the main menu or saves the input selection and exits the menu.
: Adjusts up and down.
: Moves left or right.
: Shows the signal and mode information currently set and allows the user to select a menu.
: Turns the power on and off

GETTING READY

Connecting the IR Sensors

Connecting the cable to the product allows it to receive signals from the remote control.
Rotate the IR sensor according to horizontal or vertical use.

The illustrations may differ depending on the model.

Mounting and Removing the LG Logo Bracket

Applies only to some models.
The illustrations may differ depending on the model.

Removing the LG Logo Bracket
Place a clean cloth on the floor, and remove one screw from the LG logo bracket on the lower back of the monitor with a screwdriver.

Mounting the LG Logo Bracket on the Right
Screw the LG logo bracket into the hole on the right.

CHECKING BEFORE INSTALLATION

We are not responsible for product damage caused by failure to follow the guide.

Installation Orientation

Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen.

Tilt Angle

Ceiling, Floor Orientation

Installation Location

We are not responsible for product damage caused by failure to follow the guide.

Indoor

A: 40 mm (1.5 inches)or more

The warranty will not cover any damage caused by using the product in direct sunlight on the front panel

Installing on a Recessed Wall

A: 40 mm (1.5 inches) or more
B: 50 mm (1.9 inches) or more

C: 70 mm (2.7 inches) or more
- The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.

Outdoor

Wall Mount Holder

To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.
Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.
The VESA dimensions of the wall mount by model are as follows.

*Model*	*VESA* *Dimensions* *(A x B) (mm)*	*Standard* *Dimensions*	*Length (Maximum)* *(mm)*	*Quantity*
32ML5K	200 x 200	M6	21.3	4
	*VESA* *Dimensions* *(A x B) (inches)*	*Standard* *Dimensions*	*Length (Maximum)* *(inches)*	*Quantity*
	7.8 x 7.8	M6	0.8	4

CAUTION

Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.

If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
Damage to the monitor by tightening the screws too tightly may void your warranty.
Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse of inappropriate components is not covered by the warranty of this product.

NOTE

Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
For more information on installation, please refer to the user manual for the wall mount.

PRECAUTIONS FOR USE

Dust
The warranty will not cover any damage caused by using the product in an excessively dusty environment.

Afterimage

After-image appears when the product is turned off.
- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screensaver function.
- Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause an afterimage. This is normal due to the display characteristics of this product.
When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called an afterimage.

Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed for a long time. The following are operational recommendations for reducing the occurrence of afterimages when using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better for preventing afterimages.

Recommended Usage Condition

Change the background color and text color at equal intervals.
- Afterimages occur less when the colors to be changed are complementary to one another.
Switch the screen at equal time intervals.
- Take caution, and ensure that text or images from before the screen change are not left in the same location after the screen change.

PRODUCT SPECIFICATIONS

Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.

Input/Output Ports
Resolution	Recommended Resolution	1920 x 1080 @ 60 Hz (HDMI1, HDMI2)
Resolution	Max Resolution	1920 x 1080 @ 60 Hz (HDMI1, HDMI2)
Power Voltage	120 V~ 50/60 Hz 0.7 A or POE++ : 41.1-57.0 V 1.2 A
Environmental Conditions	Operating Temperature Operating Humidity	0 °C to 40 °C (32 °F to 104 °F) 10 % to 80 % (Condition for preventing condensation)
Environmental Conditions	Storage Temperature Storage Humidity	-20 °C to 60°C (-4 °F to 140 °F) 5 % to 85 % (Condition for preventing condensation) * Product box packaging storage conditions
Audio	Input Sensitivity	0.7 Vrms
Power Consumption	On Mode	55 W (Typ.)
Power Consumption	Sleep Mode / Standby Mode (AC standard)	≤ 1.0 W

*Model* *Name*	*Size (Width x Height x Depth) (mm)*	*Weight* *(kg)*
32ML5K	729.4 x 428.9 x 55.5	5.7
	*Size (Width x Height x Thickness) (inches)*	*Weight* *(lbs)*
	28.7 x 16.8 x 2.1	12.5

HDMI (PC) Support Mode

*Resolution*	*Horizontal Frequency* *(kHz)*	*Vertical* *Frequency* *(Hz)*	*Note*
800 x 600	37.879	60.317
1024 x 768	48.363	60
1280 x 720	44.772	59.855
1280 x 1024	63.981	60.02
1680 x 1050	65.29	59.954
1920 x 1080	67.5	60

HDMI (DTV) Support Mode

*Resolution*	*Horizontal Frequency* *(kHz)*	*Vertical* *Frequency* *(Hz)*	*Note*
480/60p	31.5	60
576/50p	31.25	50
720/50p	37.5	50
720/60p	45	60
1080/50i	28.1	50
1080/60i	33.75	60
1080/50p	56.25	50
1080/60p	67.432	59.94
1080/60p	67.5	60

*Wireless module (LGSBWAC92) Specifications*
*Wireless LAN (IEEE 802.11a/b/g/n/ac)*
*Frequency range (MHz)*	*Output* *power* *(Max.)* *(dBm)*
2400 to 2483.5 5150 to 5725 5725 to 5850	18 18 18
*Bluetooth*
*Frequency range (MHz)*	*Output* *power* *(Max.)* *(dBm)*
2400 to 2483.5	8
• As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. • For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body. • FCC ID: BEJLGSBWAC92 / IC: 2703H-LGSBWAC92

LICENCE
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Vision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.

The model and serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.

Supplier’s Declaration of Conformity

Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building,Englewood Cliffs, NJ 07632
E-mail Ig.environmental@lge.com

MODEL
SERIAL NO.

Temporary noise is normal when powering ON or OFF this device.

This product qualifies for ENERGY STAR®.
Changing the factory default configuration and settings or enabling certain optional features and functionalities may increase energy consumption beyond the limits required for ENERGY STAR® certification.
Refer to ENERGYSTAR.gov for more information on the ENERGY STAR® program.

Documents / Resources

LG 32ML5K-B Digital Signage Display [pdf] Owner's Manual
32ML5K-B Digital Signage Display, 32ML5K-B, Digital Signage Display, Signage Display, Display

References

User Manual

LG 32ML5K-B Digital Signage Display