HP DeskJet 2755e Wireless Color All-in-One Printer
Printer features
- Input tray
- Scanner
- Control panel
- Cartridge access door
- Output tray extender
- Output tray
Control panel
- Power button
Press to turn the printer on/off. - Ink Alert light
Indicates low ink or cartridge problems. - Cancel button
Press to stop the current operation. - Resume button/light
Press when lit to continue a job. - Information button/light
Press to print a summary of printer settings and status. - Wireless button/light
Indicates wireless connection status. Connected when light is solid blue. Blinks when the printer is disconnected or in setup mode. - Color Copy button
Press to start a color copy job. - Black and White Copy button
Press to start a black-and-white copy job.
Note: To increase the number of copies, press the desired button multiple times.
Display icons
For more information on lights and errors, visit hp.com/support
Help and tips for Wi-Fi and connectivity
If the software is unable to find your printer during setup, check the following conditions to resolve the issue.
Do not use USB for setup
Printers with a label covering the USB port must be set up with HP Smart and an Internet connection. After setup, you can print using a USB cable if needed, but the printer must also remain connected to the Internet.
Printer hardware setup information
Follow the instructions in the HP Smart software for easy setup. Visit 123.hp.com to install the software.
Load paper
- Pull up to reveal the paper tray. Slide open the guides.
- Load a Letter or A4 paper and adjust the guides.
- Open the output tray.
- Pull open the output tray extender.
Install cartridges
- Open the ink access door.
- Remove the protective tape on both cartridges.
Caution
Do not touch the contacts under the tape. - Rotate the cartridges so the taller end faces towards the printer. Insert the cartridges and click into place.
- Close the ink access door.
Help and Support
For printer troubleshooting and videos, visit the HP support site. Enter your model name to find the printer.
Frequently Asked Questions
If your printer is not automatically found, you can add it manually.
If you are using a Wi-Fi connection, make sure that your Wi-Fi is turned on and working properly. If your printer is connected to a network with a firewall, make sure that ports 9100 and 515 are open for HP Smart.
Make sure that the printer is connected to your network and powered on. Make sure that the Wi-Fi light on the front of the printer is solid blue. If the light is blinking, check the following items: Make sure that the printer’s software is up to date. Make sure that you are using HP Smart (version 2.0 or later) and that your computer has an Internet connection. Make sure that you have entered your wireless password correctly in HP Smart. Make sure that you are using the correct wireless network name (SSID) and security settings for your printer (WEP or WPA). If you are using WPA2 encryption, make sure that you have entered your password correctly in HP Smart and in your wireless router settings. Make sure that there are no devices blocking or interfering with the signal between the router and the printer (for example, microwave ovens, cordless phones, or other wireless devices). Make sure that there are no physical barriers between the router and the printer (for example, walls or large pieces of furniture). Move closer to your router if possible; move away from any potential interference sources; or try moving your router to another location in your home or office.
If you are using a Wi-Fi connection, make sure that your Wi-Fi is turned on and working properly by testing it with another device such as a smartphone or laptop computer. If you have previously connected this device successfully, try connecting again after turning off both devices’ power switches for 30 seconds before turning them back on again. If you have previously connected this device successfully, try connecting again after changing both devices’ channel setting to 1 through 6 in their respective menus (the default channel setting is 11). If neither of these solutions works.
There is a colour and a black cartridge included. When you sign up for Insta Ink, you receive 700 pages every month for free for 6 months. If you use the coupon code X2nd8t, you also receive an additional month. 700 printed pages each month! I’d never be able to print that much.
Not included with this HP Deskjet 2755e printer is the USB cable.
The Samsung S21 Plus phone is really compatible with this HP Deskjet 2755e printer. Just make sure they’re on the same wireless network and linked to both devices.
A 110-pound sheet of paper may be fed through this HP Deskjet 2755e printer.
Setup cartridges for this printer are included in the box. Although the yield of setup cartridges varies by model, it usually suffices to complete the setup and first printing tasks for the ordinary user.
Yes, running it on Linux shouldn’t be a problem. The majority of Linux distributions offer HP printer drivers.
