GE 48733 Smart Motion Sensing Dimmer Switch
How fo make moves wifh your Smart Swifch
- Schedule your motion sensor to sleep when you sleep. Go to CYNC app and set the response schedule under room motion sensor.
- Automate your lights by enabling ambient light and motion detection. Go to CYNC app and enable the ambient light sensor under room motion sensor.
- Preset brightness levels. Dim switch to desired level, then turn off. Use Dim button instead of center on/off button to turn on lights at the preset level.
- Control other CYNC bulbs in the room with your switch. Go to CYNC app. Add bulbs and switches to a room under create a room. (sold separately)
- Connect to your Alexa or Hey Google device to control your lights with your voice.
- Try these voice commands: Amazon Alexa Alexa, turn off the living room. Alexa, good morning. Alexa, set kitchen to 50%. Hey Google Hey Gogle, turn on the lights. Hey Google, set bedroom to 20%. Hey Google, I’m leaving.
Touch Controls & Sensors
GE and C by GE are trademarks of General Electric Company. Used under trademarklicense. PK-00100024-3
Documents / Resources
 | GE 48733 Smart Motion Sensing Dimmer Switch [pdf] User Manual 48733 Smart Motion-Sensing Dimmer Switch, 48733, Smart Motion-Sensing Dimmer Switch, Motion Sensing Dimmer Switch, Dimmer Switch |
