Satechi INC012btBK USB-C 2.5 Gigabit Ethernet Adapter User Guide

Plug Ethernet cable into a LAN port of your modem or router.
To achieve 2.5 Gigabit speeds your Internet Service Provider (ISP) and router/modem must support Multi-GIG technology

Connect Ethernet cable to the RJ-45 port of the Adapter.
Connect USB-C connector of the Adapter to your host device.

Connect USB-C connector of the Adapter to your host device.
When connection is established orange LED will light up and green LED will start blinking
Attention :

  • Compatible with Thunderbolt 3, Thunderbolt 4, USB 4 , USB-C 3.2 Gen 2, USB-C 3.2 host devices
  • Adapter can be connected to USB-A host devices by using a Type-A to Type-C adapter (not included)
Contents hide
1 Documents / Resources
1.1 References
2 Related Posts

Documents / Resources

Satechi INC012btBK USB-C 2.5 Gigabit Ethernet Adapter [pdf] User Guide
INC012btBK USB-C 2.5 Gigabit Ethernet Adapter, INC012btBK, USB-C 2.5 Gigabit Ethernet Adapter, Gigabit Ethernet Adapter, Ethernet Adapter, Adapter

References

Related Posts

Leave a comment

Your email address will not be published. Required fields are marked *