ASUS ROG Strix Flare II Animate Keyboard
Package Contents
Features
- A Media control:
Next/Previous song - B Volume control:
- Up/Down to adjust volume
- Press to mute
- C Windows Lock:
Toggle to enable/disable WIN key - D Keyboard LED brightness:
5 different keyboard LED brightness levels (excluding AniMe Matrix™ LED DISPLAY) - E Play/Pause:
Press to Play/Pause
Updating the firmware and customization
- Connect your keyboard to the PC.
- Download and install the Armoury Crate software from https://rog.asus.com.
- Follow the software instructions to update your gaming keyboard firmware.
- Customize your gaming keyboard using Armoury Crate.
Attaching the wrist rest
Using the switch puller
CAUTION! Be careful when removing or replacing the switch; damages to the switch and/or the keyboard due to removing or replacing the switch is not covered by the warranty.
Key combinations
| On-the-fly Macro Recording | |
| Step 1: | Fn + Left-ALT to start recording |
| Step 2: | Enter the keys to be recorded as a macro |
| Step 2: | Fn + Left-ALT to end recording |
| Step 3: | Assign Macro Key |
| NOTE: Keys without lighting cannot be assigned as Macro Key, keys in red are already assigned. | |
| Profile Switch | |
| Fn + 1 / 2 / 3 / 4 / 5 / 6* 6 is default |
|
| Light Effect Switch | |
| Fn + Right or Fn + Left | |
| Brightness Level for AniMe Matrix™ LED DISPLAY | |
| Fn + Up: Brightness up Fn + Down: Brightness down |
|
| Factory Default | |
| Fn + Esc: Hold these two buttons until the LEDs blink green. | |
NOTE: When running AURA SYNC, the hot key related with the lighting effect will be disabled, for example: Profile switch, Lighting effects switch, Brightness level.
Profile color and lighting effect mapping list
| Effects and the color | Profile 1 (Red) | Profile 2 (Purple) | Profile 3 (Blue) | Profile 4 (Green) | Profile 5 (Yellow) | Default Profile |
| Static | Red | Purple | Blue | Green | Yellow | White |
| Breathing | Red | Purple | Blue | Green | Yellow | White |
| Color Cycle | Multi-color | Multi-color | Multi-color | Multi-color | Multi-color | Multi-color |
| Rainbow | Multi-color | Multi-color | Multi-color | Multi-color | Multi-color | Multi-color |
| Ripple | Red | Purple | Blue | Green | Yellow | Random color |
| Reactive | Red | Purple | Blue | Green | Yellow | Random color |
| Starry Night | Red | Purple | Blue | Green | Yellow | Random color |
| Quicksand | Red | Purple | Blue | Green | Yellow | Random color |
| Current | Red | Purple | Blue | Green | Yellow | Random color |
| Rain Drop | Red | Purple | Blue | Green | Yellow | Random color |
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Compliance Statement of Innovation, Science and Economic
Development Canada (ISED)
This device complies with Innovation, Science, and Economic Development Canada licence exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Documents / Resources
 |
ASUS ROG Strix Flare II Animate Keyboard [pdf] User Guide ROG Strix Flare II Animate Keyboard, Flare II Animate Keyboard, ROG Strix Animate Keyboard, Animate Keyboard, Keyboard |
