Majority DVD Player User Manual

Majority DVD Player

USER MANUAL

Back View

9. (Y.Pb/Cb.Pr/Cr) Output
10. Power Cable Outlet
11. HDMI Output
12. 2 x Audio Output Ports
13. Video Output

Remote Control

14. On/Off
15. Subtitles
16. Return: Return to VCD menu
17. Switch to DVD or USB mode
18. Language
19. Setup
20. Navigate Up
21. Navigate Left
22. Navigate Down
23. Menu/PBC: Playback control
24. 0-9/10+: Select desired track/chapter in menu selection
25. Rewind
26. Fast-Forward
27. Play/Pause
28. Stop
29. Slow
30. Zoom: Press to zoom in, press again to zoom out. Use arrow keys to move picture
31. Time
32. Mute
33. Open/Close DVD Tray
34. Title
35. Angle
36. N/P: Switch between NTSC or PAL
37. Navigate Right
38. Enter/Confirm
39. Programme
40. L/R: Use for VCD or CD discs. Select left or right channel or stereo
41. Next Chapter/Track
42. Previous Chapter/Track
43. Volume Up
44. Volume Down
45. Repeat: Press repeatedly in DVD mode to scroll through: Repeat a title, chapter, track or go to the beginning. In SVCD, VCD or CD mode: Track repeat, all repeat or repeat cancel.
46. OCD

Instructions Guide

Getting Started

**Please note all (Ref.) refer to the Controls and Functions in the above diagrams.

Setting Up

Connect the power plug of the DVD player to a wall outlet. The power indicator and timer on the front panel will illuminate (Ref.3).

Follow the guidance below for connecting your DVD player:

Cable Connection Options

Connect a RCA cable between the 2 channel Audio Output port and the RCA input on your TV.

Connect a HDMI cable between the HDMI Output on the back panel of the DVD player (Ref.11) to the HDMI input on your TV.

Connect a (Y Pb/Cb Pr/Cr) cable via the (Y/Cb/Pb Cr/Pr) Output of the DVD player (Ref.9) to your TV (R/L/Video port and cable).

DVD Operation

**The following DVD formats can be played: DVD, DVD-R-RW, CD Video, Mpeg4.

Ensure that your TV is set to the correct mode for DVD playback.

Plug in the DVD player and press the ‘Power’ button to turn the unit on. You can do this on the unit (Ref.8) or via the remote (Ref.14).

When the machine is switched on, pressing the ‘Power’ button (Ref.14) on the remote control will make it go into standby mode. Press the button again and the machine will switch on.

WARNING: If the product will not be used for an extended period of time, it is advisable to unplug it for safety.

Press the ‘Open/Close’ button on the front panel (Ref.5) or on the remote control (Ref.33) and place a DVD disc on the disc tray (Ref.1). Press the ‘Open/Close’ button again to close the tray.

The DVD will read the DVD disc and begin playing. You can control the playback and settings via the remote control.

USB Operation

This device has a USB port in the front interface for Movie playback.

Insert a USB device into the USB port (Ref.4).

Press the ‘DVD/USB’ button on the remote control (Ref.17) to switch the source to USB. The DVD player will read and display the file list from the USB drive.

Browse through the file list by pressing the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) on the remote control. Select a file by pressing the ‘ENTER’ button (Ref.28) of the remote control.

Playing JPEG/Picture CD & MP3 Discs

Playing JPEG/Picture CDs

**The following formats can be played: Jpg, Jpeg, CD Photo

Press the ‘Stop’ button (Ref.28) and 12 small pictures will show on the TV screen.

Use the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to scroll through your photos. Press the ‘ENTER’ button (Ref.28) to select and view a picture.

To access the instructions menu, use the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to scroll through the menu options and then press the ‘ENTER’ button to confirm (Ref.28). The following options will display:

PROG – Select to change picture transform mode

STOP – Entering picture preview mode

PREV – Previous picture

NEXT – Next picture

PLAY – Play picture

UP – Mirror image in vertical

DOWN – Mirror image in horizontal

LEFT – Rotate 90 degrees anticlockwise

RIGHT – Rotate 90 degrees clockwise

ZOOM – Change zoom mode

FAST FORWARD – Zoom in the picture

FAST REWIND – Zoom out the picture

NAVIGATION BUTTONS – Move zoom focus for picture.

Playing MP3 Discs

**The following formats can be played: Mp3, WMA, CD Audio, CD-R-RW, CD

Whilst an MP3 disc is playing, a menu screen will display on the TV. Press the ‘Up’ and ‘Down’ buttons (Ref.20, Ref.22) to scroll through tracks or folders. Press the ‘ENTER’ button (Ref.38) to select the track or folder.

Press the ‘PROG’ button (Ref.39) in file play mode. The screen will then display the total track number and the current track playing. Use the digit buttons (Ref.24) to key in and select the track or use the ‘Up’ and ‘Down’ (Ref.20, Ref.22) buttons to shift to the track and press the ‘ENTER’ button (Ref.38) to play the track.

System Setup

Menu Operation

Press the ‘SETUP’ button (Ref.19) on the remote control and the Setup menu will display.

The menu options are ‘General’, ‘Audio’, ‘Dolby’, ‘Video’ and ‘Preference’. Follow the instructions below for each of the set up options:

Menu 1: General
Menu 2: Audio
Menu 3: Dolby
Menu 4: Video
Menu 5: Preference

After accessing the Setup menu, press the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to access your chosen sub-menu. Press the ‘ENTER’ button (Ref.38) to confirm your selection.

To end the setup, press the ‘SETUP’ button again (Ref.19).

Follow the guidance below for General, Audio, Dolby, Video and Preference settings.

Menu 1: General Setup

Once you have selected the ‘General’ menu, use the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to scroll between sub-menus. Press the ‘ENTER’ Button (Ref.38) to select one of the following sub-menus:

TV Display (Aspect Ratio)

Different values will be displayed here depending on your TV set. In most cases, you will be able to select from 4:3/PS (Pan and Scan), 4:3/LB (Letterbox), and 16:9 (best for widescreen TV sets). Please note that to change the Aspect Ratio, the disc must be stopped first.

Angle Mark

In DVD mode, use to view DVD from different angles.

OSD Lang

Select a language for the on-screen display language (English, French, German, Italian, Spanish or Portuguese).

Captions

The default setting is Caption off. You can display closed captions (if available).

Screen Saver

Select a screen saver for when the TV display goes into standby or a disc is not played for several minutes. Press any button on the remote control to wake it up.

HDCD

Select an output audio signal. You can select the digital filter to be 1 x (44.1 KHz) or 2 x (88.2 KHz).

Last Memory

If the last memory is set when the unit is on and the unit is switched off, the last position on the DVD player will be memorised.

Menu 2: Audio Setup

Once you have selected the ‘Audio’ menu, use the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to scroll between sub-menus. Press the ‘ENTER’ Button (Ref.38) to select one of the following sub-menus:

LT/RT

The audio output is in the Left and Right channels format. Switch between left/right audio channels.

Stereo

Select to play the audio via the two front speakers of the TV.

Menu 3: Dolby Digital Setup

Once you have selected the ‘Dolby’ menu, use the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to scroll between sub-menus. Press the ‘ENTER’ Button (Ref.38) to select one of the following sub-menus:

Dual Mono

• Stereo: stereo output
• L-Mono: mono-left channel
• R-Mono: mono-right channel
• Mix-Mono: mix mono channel

Dynamic

Select to reduce the bass and treble, to create a fine detailed sound. This mode is recommended for reduced sound to avoid disturbance for night time viewing.

Menu 4: Video Setup

Once you have selected the ‘Video’ menu, use the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to scroll between sub-menus. Press the ‘ENTER’ Button (Ref.38) to select one of the following sub-menus:

Component

Adjust the video output when connecting to video terminals.

YUV: set video output in analogue component video format when connecting to Y/U/V terminals.

Resolution (HDMI output)

You can choose the following resolution levels from the HDMI output: 480I/576I/720P50/720P60/1080I50/1080I60/1080P (50Hz)/1080P (60Hz)

This DVD player can produce up to 1080P video resolution output. The maximum resolution will depend on the video source and the TV set.

Quality

You can set the sharpness, brightness and contact according to your preference.

Menu 5: Preference Setup

To access the Preference section, the player must be in one of the following states:

1. with the disc tray open; or
2. with the disc tray closed but with no disc inside.

Once you have selected the ‘Preferences’ menu, use the navigation buttons (Ref.20, Ref.21, Ref.22, Ref.37) to scroll between sub-menus. Press the ‘ENTER’ Button (Ref.38) to select one of the following sub-menus:

TV Type

This unit is suitable for a wide variety of TVs. You can select PAL or NTSC if necessary. PAL must be selected for use in Europe.

Audio

If supported by the disc content, the audio settings can be changed.

Subtitle

If supported by the disc content, the subtitle settings can be changed. An alternative way to access this menu is by pressing the ‘SUBTITLE’ button (Ref.15).

Disc Menu

If supported by the disc content, the Disc Menu settings can be changed.

Parental

Select to control parental control settings. Any disc with a parental level higher than the set level will not be played.

Password Setup

The initial factory password is 0000. You can change the password here.

Default Setup

Select to revert to the original factory set up on this unit.

AUX	n/a
RCA	3.5 mm
Display	Mono LED
Dimmable	No

Safety Info

1. Read these instructions:
2. Heed all warnings.
3. Follow all instructions in the user manual.
4. Do no clean the apparatus near or with water.
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
7. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
8. Only use attachments/accessories specified by the manufacturer.
9. Unplug this apparatus during light storms or when unused for long periods of time.
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
11. No naked flame sources, such as lit candles, should be placed on the apparatus.
12. Dispose of used electrical products and batteries safely according to your local authority and regulations.

Addition Warnings

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.

Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main power completely, the power plug should be disconnected from the main socket outlet completely.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Recycling Electrical Products

You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.