Led2 BOX Ceiling Point LED Instruction Manual

Led2-logo

Led2 BOX Ceiling Point LED

Led2-BOX-Ceiling-Point-LED-PRODUCT

Product Information
The product is a lighting fixture with different dimming options. It has multiple models with different specifications:

  • Model 1: Box
  • Model 2: LL 6
  • Model 3: N N
  • Model 4: (EN)

CAUTION!
The product is designed to be installed by a technician or a qualified person. It is important to turn off the main power before installation to prevent electric shock. The lampshade/diffuser, if present, should be handled carefully as it is fragile. Only a technician or qualified person can replace the integrated LED light source.

The product is compatible with different dimming methods:

  • Model 1: PUSH DIM
  • Model 2: DALI/PUSH DIM
  • Model 3: DALI DIM
  • Model 4: TRIAC DIM

The product operates with an input voltage of 220-240V and a frequency of 50/60Hz.

Product Usage Instructions

  1. Before installation, ensure the main power is turned off to avoid electric shock.
  2. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile.
  3. For models with an integrated LED light source, only a technician or qualified person can perform the replacement.
  4. Select the appropriate model based on the desired dimming method:
    • Model 1: PUSH DIM
    • Model 2: DALI/PUSH DIM
    • Model 3: DALI DIM
    • Model 4: TRIAC DIM
  5. Connect the product to a power source with an input voltage of 220-240V and frequency of 50/60Hz.
  6. Follow the specific wiring instructions for each model:
    • Model 1: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver.
    • Model 2: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. For DALI functionality, connect the DA/L and DA/N wires.
    • Model 3: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. For DALI functionality, connect the DA wires.
    • Model 4: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. Use a phase-cut Triac dimmer for dimming control. For trailing edge dimming, connect the Trailing edge wire. For leading-edge dimming, connect the Leading edge wire.
  7. After installation, turn on the main power to activate the product.

Note: The manufacturer is not responsible for any incorrect use or assembly of its products.

The installation may only be carried out by a technician

Led2-BOX-Ceiling-Point-LED-FIG-1Led2-BOX-Ceiling-Point-LED-FIG-2Led2-BOX-Ceiling-Point-LED-FIG-3

CAUTION!
Turn off the main power before proceeding with the installation in order to prevent possible shock. The installation may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.

CONNECTION – DIMMABLE VERSION – OPTIONAL

Led2-BOX-Ceiling-Point-LED-FIG-4

CAUTION!
Turn off the main power before proceeding with the installation in order to prevent possible shock. The installed -tion may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.

Documents / Resources

PDF thumbnailBOX Ceiling Point LED
Instruction Manual · BOX Ceiling Point LED, BOX, Ceiling Point LED, Point LED, LED

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.