Mpow M9 BH413A Earbuds User Manual

USER MANUAL

Mpow M9

True Wireless Earbuds
Mpow M9 / BH413A

PACKING LIST

PACKING LIST

DIAGRAM

DIAGRAM

PAIRING

PAIRING

Take out the earphones. they automatically enter the pairing mode when the blue and red lights start flashing alternately, and then select “Mpow M9”.

Note: The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone, please disconnect Bluetooth on the paired smartphone.

POWER ON

POWER ON

POWER OFF

POWER OFF

MUSIC

  1. Volume Up/ Down
    Volume+ : press and hold the MFB button of Rightearbud to tum up the volume increasingly.
    Volume – : press and hold the MFB button of Leftearbud to turn down the volume decreasingly.
  2. Next / Previous Track
    Double click the MFB button on the R/L earphone.
  3. Play/ Pause
    Click the MFB button on the Right or Left earphone once.

INCOMINO CALL

  1. Answer/ Hang up
    Click the MFB button on the Right or Left earphone once.
  2. Reject
    Keep pressing the MFB button on the Right or Left earphone 1brls.
  3. Activate Siri
    Triple-click MFB button on the Right or Left earphones.

RESET

RESET

ln the state of charging. simultaneously press and hold both MFB buttons for 10s.

CHARCINC

CHARCING

Do not put the earbuds in the charging case when the earbuds are wet

CORRECT DISPOSAL OF THIS PRODUCT

( waste Electrical& Electronic Equipment)

Disposal

This Marking shows on the product or its literature . indicate that it should not be disposed with other household wastes
at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should

contact either the retailer where they purchased this product or their local government office. for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact this product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment


This device complies with part 15 of the FCC Rules Operation is subject to the followings two conditions,

  1. This device may not cause harmful inference. and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. This simplified version is very helpful and easy to navigate.
    The multiple languages were a little confusing for an old person who only speaks English.

  2. My right earbud is not playing sound. It’s annoying. Can anyone please help me?

    Kayla asks My right earbud is not playing sound. It's annoying. Can anyone please help me?
    Manuals+ clarified question
    Question

    How do I fix my Mpow M9 right earbud if it is not playing sound?

    Answer

    To resolve issues where one earbud is not playing sound, you should perform a factory reset on your Mpow M9 earbuds. Follow these steps:

    1. Place both earbuds back into the charging case.
    2. While the earbuds are in the state of charging, simultaneously press and hold the MFB (Multi-Function Button) on both the left and right earbuds for 10 seconds.
    3. Once the reset is complete, remove the earbuds from the case. They should enter pairing mode automatically (indicated by blue and red lights flashing).
    4. Go to your device's Bluetooth settings, forget the previous "Mpow M9" connection, and pair them again.

    If the right earbud still does not work, ensure that the charging pins in the case and on the earbud are clean and that the earbud is fully charged.

  3. Because my hearing aids do not charge as they should and they are new
    Porque mis audífonos no cargan como tiene que ser y están nuevos

    Marilyn asks <em>Because my hearing aids do not charge as they should and they are new</em>
    Porque mis audífonos no cargan como tiene que ser y están nuevos
    Manuals+ clarified question
    Question

    Why are my new Mpow M9 earbuds not charging correctly?

    Answer

    If your new Mpow M9 earbuds are not charging correctly, please try the following troubleshooting steps:

    • Check for Insulation Film: New earbuds often have a small plastic film covering the charging contacts on the earbuds themselves. Ensure this film has been removed from both earbuds.
    • Clean Charging Contacts: Use a dry cotton swab or a soft cloth to gently clean the metal charging pins inside the case and the contact points on the earbuds to ensure a solid connection.
    • Perform a Reset: While the earbuds are in the charging case, simultaneously press and hold both MFB (Multi-Function Buttons) for 10 seconds. This can often resolve software-related charging issues.
    • Verify the Power Source: Ensure the charging cable is securely plugged into the case and a functional USB power source.
    • Dry the Earbuds: The manual explicitly warns not to put the earbuds in the charging case when they are wet. Ensure they are completely dry before attempting to charge.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.