Installation Instructions
Vent Pipe Cap Model: VPC-3 Diameter: 3″
VPC-3 Vent Pipe Cap

Flashing Detail & Instructions

- Slide the Vent Pipe Cap over the existing pipe.
- Observe the screws located on top of the vent. Use this as a pattern to attach the vent to the pipe.
- To secure the vent, attach the vent to the pipe using a #8 self-tapping sheet metal screw.
- Total number of screws needed = 3
- Recommended installation screw: #8 x 1/2″ Sheet Metal Screw
- Screws not included.
* All Aluminum Construction, Thickness = 0.025″ [0.635 mm]
Active Ventilation Products, Inc.
Website: roofvents.com Email: sales@roofvents.com
Documents / Resources
![]() | VPC-3 Vent Pipe Cap |
References
- Roof Vents, Solar Attic Fans, Gravity Vents, Static Vents, Vent Capsroofvents.com
- User Manualmanual.tools
Published: June 14, 2023
