Feit Wi-Fi Smart Bulb Setup Guide

Smart Wi-Fi Lighting
FAQs and Trouble Shooting Tips

How do I set up and install the lights?

Screw the light into a socket and turn it on. The light should start blinking indicating that the bulb is in pairing mode and ready for installation. If they are not blinking turn the light on for one second and off for one second, three consecutive times. When the light flashes rapidly, it is ready for setup. Then open up the Feit Electric app, connect to a 2.4 GHz Wi-Fi network and follow the instructions in the app.

I am having trouble connecting my Smart Light to Wi-Fi.

  1. Make sure the Wi-Fi network is a 2.4 GHz network. The Smart Wi-Fi Light will not connect to a 5 GHz network. If your Smart Wi-Fi Light is already on the right frequency, make sure that your phone is not using a VPN app in the background.
  2. Test your Wi-Fi network with other devices such as your phone to make sure it is operating properly and has strong coverage.
  3. The Wi-Fi connection may not have good coverage during setup. You may need to improve your Wi-Fi network coverage by upgrading your router or adding a range extender.
  4. Your Wi-Fi network password is case sensitive, make sure you are entering it correctly.
  5. The light must be blinking rapidly to connect. If it is not blinking rapidly turn the light on for one second and off for one second, three consecutive times. When the light is flashing rapidly, it is ready for setup

How do I access the Smart Wi-Fi Light smart features in the Felt Electric app?

From the My Home menu in the Feit Electric app press and hold the device icon for 2-3 seconds to access the control panel.

The lights do not turn on.

The Smart Wi-Fi Light may not have power to it, make sure the wall switch or breaker is in the On position.

Can I turn the Smart Wi-Fi bulb on or off with a light switch?

Using wall switches to turn off the bulb is not recommended, as it may cause compatibility issues or reset the bulb to factory settings.

Why can’t my Smart Wi-Fi bulb change color?

First, be sure the Smart Wi-Fi light is a color-changing light. Then check the color picker screen in the Feit Electric app to make sure the saturation slider at the bottom is set to 100%.

NOTE: On some older phone models, you may need to scroll down on the screen to find to the saturation.

What does It mean if my Smart Wi-Fi Light status is “of line” or the light is flashing?

A power outage or router service interruption disconnected the bulb from the network. Follow instructions in your user manual to reconnect.

How do I reset the Smart WI-Fl Lights?

To reset your light, turn it on for one second and off for one second, three consecutive times. When the light flashes rapidly, it is ready for setup.

Are the Smart Wi-Fi Lights HomeKit compatible?

Smart Wi-Fi lights are not HomeKit compatible. But you can enable Sid shortcuts using the Smart Scenes feature in the Feit Electric App.

How do I share my Smart Wi-Fi Light with another Felt Electric app account?

From the My Home menu in the Feit Electric app tap Profile and then Share Devices and Share Devices at the bottom of the screen. Select the device that you wish to share and tap Sharing in the upper right corner. Enter the new account mobile number or email address then tap Done. The account must be set up before sharing the device.

How do I rename my Smart WI-Fi Light?

Press and hold the device icon for 2-3 seconds to access the control panel. Tap the icon in the top right corner and select Edit Device Name.

Can I schedule in a specific color or brightness level using Smart Wi-Fl lights?

You can use Smart Scenes to set a scene with a specific color or brightness level for a device or group of devices, and then Automations to schedule the settings.

Can I set up a wake-up timer?

You can schedule Smart Wi-Fi devices to go on at a certain time with preset light intensity levels and other settings using Smart Scenes and Automation. You can also use Google or Alexa Routines to set up using their voice assistant applications.

Can the Smart Wi-Fi lights be used outdoors?

The lights are damp-rated, meaning they can be used outside as long as they’re protected against severe weather and water contact. Keep in mind that the device also has to be within range of the router at all times.

Can I use Smart Wi-Fi lights with a dimmer?

No, the Smart Wi-Fi lights have a built-in dimmer. You can dim the light using the Feit Electric app.

Feit Wi-Fi Smart Bulb Setup Guide – Original PDF

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. My smart bulb won’t start blinking – I have tried resetting it multiple times (on/off x3)

    Leonard Avecilla asks My smart bulb won't start blinking - I have tried resetting it multiple times (on/off x3)
    Manuals+ clarified question
    Question

    Why is my Feit Wi-Fi Smart Bulb not blinking even after I try the reset procedure?

    Answer

    If your Feit Wi-Fi Smart Bulb is not blinking after the standard reset attempt, please try the following adjustments to your timing and environment:

    • Refine the Timing: The manual specifies turning the light on for one second and off for one second, three consecutive times. If you are toggling the switch too quickly or too slowly, the reset may not trigger. Try to be precise with the one-second intervals.
    • Check the Power Source: Ensure the bulb is screwed into a standard socket that is receiving power. Do not use the bulb with a dimmer switch, as this can interfere with the power flow required for the reset sequence; use a standard on/off toggle switch if possible.
    • Try an Alternative Reset: Some Feit models may require up to five toggles instead of three. If three cycles do not work, try turning the switch on and off five times in the same one-second intervals.
    • Verify Bulb Status: If the light turns on but remains solid, it is receiving power but not entering pairing mode. If it does not turn on at all, check your circuit breaker or try the bulb in a different lamp to rule out a hardware failure.

    Once the light begins flashing rapidly, it is ready for setup within the Feit Electric app on a 2.4 GHz Wi-Fi network.

  2. my wi-fi is 5 how can I change it to 2.4, to connect a switch
    mi wi-fi es de 5 como lo puedo cambiar a 2.4, para conectar un switch

    lalo asks <em>my wi-fi is 5 how can I change it to 2.4, to connect a switch<e/em>
    mi wi-fi es de 5 como lo puedo cambiar a 2.4, para conectar un switch
    Manuals+ clarified question
    Question

    How can I change my Wi-Fi from 5GHz to 2.4GHz to connect my Feit smart device?

    Answer

    Feit Smart Wi-Fi devices require a 2.4 GHz network and will not connect to a 5 GHz network. To change or access the 2.4 GHz frequency, you can try the following steps:

    • Check for separate SSIDs: Look at your Wi-Fi list on your phone. Some routers provide two separate names (e.g., "Home_WiFi_2.4G" and "Home_WiFi_5G"). Connect your phone to the 2.4G version before starting the Feit Electric app setup.
    • Router Settings: If you only see one Wi-Fi name, your router may be using "Smart Connect" or "Band Steering." You may need to log into your router's web interface to temporarily disable the 5 GHz band or create a separate guest network specifically set to 2.4 GHz.
    • Distance: Since 5 GHz signals have a shorter range, moving further away from your router while pairing can sometimes force your phone to switch to the 2.4 GHz band.

    Ensure your phone is not using a VPN during setup and that your Wi-Fi password is entered correctly, as it is case-sensitive.

  3. Do not buy this smart bulb, it just waste time and energy to install

    Anonymous asks Do not buy this smart bulb, it just waste time and energy to install
    Manuals+ clarified question
    Question

    How do I troubleshoot difficulty installing and connecting the Feit Wi-Fi Smart Bulb?

    Answer

    If you are experiencing difficulties installing your Feit Wi-Fi Smart Bulb, please ensure you are following these critical steps:

    • Check Wi-Fi Frequency: The bulb only connects to 2.4 GHz Wi-Fi networks. It will not work on a 5 GHz network.
    • Pairing Mode: The bulb must be flashing rapidly to connect. If it is not, reset it by turning the light on for one second and off for one second, three consecutive times.
    • Network Settings: Ensure your phone is not using a VPN during setup and that your Wi-Fi password is entered correctly (it is case-sensitive).
    • Signal Strength: Ensure the bulb is within strong range of your router. You may need to move the bulb closer to the router during the initial setup or use a range extender.
    • App Requirements: Use the Feit Electric app and ensure your phone's Bluetooth and location services are enabled to assist with discovery.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.