Pure Resonance Audio VCA8 Vector Ceiling Speaker
- SYSTEM TYPE: Omnidirectional 2′ x 2′ Ceiling Speaker Array
- POWER HANDLING: 120W
- FREQUENCY RESPONSE: 35 Hz – 20 kHz
- SENSITIVITY: 92dB (half space)
- IMPEDANCE: 8 ohm
- WOOFERS:5″ Aluminum
- DISPERSION: 180° x 360° (hemispherical)
- DRIVER COMPLEMENT: Array of three full-range 6.5″ drivers
- DIMENSIONS (H X W X D):75″ (603.25 mm) x 23.75″ (603.25 mm) x 4.75″ (120.65 mm)
- NET WEIGHT: 16 lbs. (7.26 kg)
- SHIPPING DIMENSIONS (H X W X D): 28″ (711.2 mm) x 28″ (711.2 mm) x 9.25″ (234.95 mm)
- SHIPPING WEIGHT: 18 lbs. (8.16 kg)
Super Dispersion ceiling speaker arrays are the best choice for classrooms, conference rooms, training rooms, teleconferences, churches, retail locations, corporate offices, and many more applications. They also provide unmatched performance and affordability. Conventional speaker layouts emit sound in a constrained, directed pattern like a “flashlight.” Although low frequency sounds are projected out, the crucial higher frequencies that aid in the reproduction of speech and music shrink and focus directly underneath or in front of the speaker.
INTRODUCTION
DESCRIPTION
The VCA8 lay-in 2×2 drop tile ceiling speaker array has outstanding 360° of seamlessly smooth coverage which greatly improves speech intelligibility and provides powerful crystal clear music reproduction. It takes minutes to install, just remove one ceiling tile and lay-in the VCA8 into any standard drop ceiling tile grid system. The 8 ohm input is compatible with any commercial or stereo sound system. We provide Quantity Pricing and Discounts for Schools, Government and Military buyers click below.
FEATURES
- Omni Directional Speaker Coverage 360° x 180° (hemispherical)
- Infinite-baffle in-ceiling speaker’s drops into standard ceiling tile openings
- Powerful – 120W at 8Ω
- 3 – 6.5” Full Range Drivers
- Uniquely designed fire retardant ABS housing may be painted to match any décor
SAFETY PRECAUTIONS
- Be sure to read the instructions in this section carefully before use. The included conventions of safety symbols and messages are regarded as very important precautions.
- We recommend you keep this instruction manual handy for future reference.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result from mishandling. Before operating this product, read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety risks. Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury. Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.
WARNING!
IMPORTANT SAFETY INSTRUCTIONS
***THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
THE PROVIDED INSTALLATION HARDWARE MUST BE USED TO INSTALL THIS PRODUCT. SPEAKER UNIT MUST BE ATTACHED BY A SAFETY CABLE!***
Pro Acoustics is not responsible for the structural integrity of the installation. Please make sure a qualified technician installs this product and the building’s engineer or architect has approved the equipment and installation.
- DO NOT block any ventilation openings. Install in accordance with all safety standards and regulations.
- DO NOT install near any heat source such as stoves, radiators, heat registers, amplifiers or any other apparatus producing heat.
- USE attachments and accessories as indicated by the manufacturer.
- REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged or objects have fallen into the apparatus, the apparatus does not operate normally, or has been dropped.
* No user-serviceable parts inside. Refer all servicing to qualified service personnel.
* WARNING: To prevent injury, this apparatus must be securely attached in accordance with the installation instructions. No naked flame sources – such as candles – should be placed close to the product.
* CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s warranty.
CAUTION!
READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THE UNIT WITH THE GROUND STAKE ACCESSORY KIT
Although they are designed to withstand the elements, there are precautions you should take to optimize the long-term performance of your speaker. Keep soil and wood chips from covering the speaker grill. If soil accumulates on the grill, it can be rinsed away with low water pressure. Chemicals commonly used in the yard can potentially damage the rubber elements of the speaker. Avoid spraying such chemicals onto or near the speaker. Also, avoid placing the speakers where the grill area will come in direct contact with sprinklers.
INSTALLATION & OPERATION GUIDE
PREPARATION
- Remove the speaker from the box and packaging.
- Remove the ceiling tile from the grid where you wish to install the speaker. NOTE: If you are installing the speaker into a 2’ x 4’ ceiling tile space, you will need to cut the tile to fit the speaker and use a common ceiling t-rail.
- Pull all needed wires.
- Set the 70 volt/8 ohm tap selector: Use the transformer switch to match the input voltage specified by the system designer. To do this you may need to slide the switch from 70 volt (factory default setting) to 25 volt or, in some cases, to bypass directly. This switch is located next to the power level selector switch. Both 70 volt and 25 volt settings are available, as well as a bypass to the 8 ohm driver.
- Adjust the transformer “tap” setting according to the level specified by the system designer. The ESSENTIALS and PRIVACY speakers are set at a factory default 2 watt tap setting prior to shipping. The APPLAUSE speakers are set at factory default 7.5 watt tap setting prior to shipping.
*Use in conjunction with amplifier output/rating requirements.
*Do not feed 70 volt or 25 volt signal into the speakers when the 8 ohm bypass mode has been selected. This will permanently damage the speaker
***Do not exceed the maximum power rating of the speaker. The maximum power rating for each speaker is as follows: ESSENTIALS = 8 watts, PRIVACY = 4 watts, APPLAUSE = 30 watts
TERMINATION
- Connect all wires.
INSTALLATION
- Connect the safety cables. See warning section on page 3.
- Angle the SD4 to fit into the ceiling and place the speaker driver side down into the tile.
BASIC SPEAKER INSTALLATION 
BASIC ATTENUATOR/VOLUME CONTROL INSTALLATION
SERVICE
Ensure the problem is not related to operator error, or system devices that are external to this unit. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual.
LIMITED WARRANTY
PRO ACOUSTICS, LLC. (“PRO ACOUSTICS”) warrants this product to the original purchaser to be free from defects in materials and workmanship (subject to the terms set forth below), for the following periods from the date of purchase.
THIS WARRANTY COVERS THE LISTED PRODUCTS AGAINST DEFECTS IN MATERIALS OR WORKMANSHIP FOR THE FOLLOWING PERIOD
PRO ACOUSTICS will repair or replace (at PRO ACOUSTICS’s option) this product or any defective parts (excluding electronics and amplifiers) in this product.
Your authorized PRO ACOUSTICS dealer will inspect the product and, if your dealer is not equipped to perform the repair of your PRO ACOUSTICS product, they will replace your product or return it to PRO ACOUSTICS for repair, at their discretion. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty period, must be presented to obtain warranty service.
This warranty is invalid if the factory applied serial number has been altered or removed from this product. This warranty is invalid if this product was not purchased from a PRO ACOUSTICS authorized dealer. Cos-metic damage or damage due to the accident, acts of God, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product are not covered in this warranty. This warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than PRO ACOUSTICS or a PRO ACOUSTICS dealer which is authorized to do PRO ACOUSTICS warranty work. Any unauthorized repairs will void this warranty. This warranty does not cover products sold as is.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER/PURCHASER. PRO ACOUSTICS U.S.A. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
This warranty gives you specific legal rights. You may have other rights which vary from state to state.
FREQUENTLY ASKED QUESTIONS
What kind of rackmount amplifier should I acquire if I buy four of these speakers?
Any 2-channel amp that is stable to 4-ohms will operate with the VCA8 Speakers.
Are they Bluetooth?
No, they aren’t Bluetooth.
Can they be connected straight to the TV’s rear AV output?
No, they can’t be connected straight to the TV’s rear AV output.
Are ceiling speakers a good idea?
Most inexpensive ceiling speakers offer great sound quality and value for the money. There is therefore no need to be concerned about it using up the entire budget if you’re attempting to stay to a strict budget when upgrading your home audio.
What is better ceiling or wall speakers?
Compared to in-ceiling speakers, in-wall speakers are frequently more potent and of superior quality.
Do ceiling speakers need an amplifier?
An external amplifier that is wired via speaker cable to each ceiling speaker is required to power all of the ceiling speakers.
Do ceiling speakers need a subwoofer?
Even if ceiling speakers are capable of producing all the bass and low-end frequencies, a subwoofer will be helpful in handling them.
Do ceiling speakers make a difference?
In-ceiling speakers offer a relatively comparable feel to Dolby Atmos’ pattern of sound reverberating off the ceiling and back into the room.
Should ceiling speakers be enclosed?
Yes. The sound quality of your in-ceiling speakers will be diluted if a back box is not installed, and this will cause noise pollution in other rooms in your house.
How many ceiling speakers do I need per room?
For rooms greater than 3 by 3 meters, we typically advise using one pair of ceiling speakers, and for areas wider than 5 x 5 meters, two pairs of ceiling speakers will provide a more balanced sound.
Where should I put my ceiling speakers?
To provide a balanced sound, your in-ceiling speakers should be distributed evenly across the space. A single ceiling speaker could be adequate in a compact area. For the optimum sound dispersion in this scenario, position the speaker as close to the room’s center as you can.
Are ceiling speakers good for TV?
If installed properly, ceiling speakers may significantly enhance the sound from your TV. Your TV may be connected to the amplifier in a number of ways, including via a connection cable.
What do ceiling speakers connect to?
No, ceiling speakers typically function as passive speakers, which means they lack internal amplifiers and are powered by speaker cables connected to an external amplifier.
Video
References
- User Manualmanual.tools