Lrecat
Lrecat J52 Wireless Earbud, Lrecat Bluetooth
Specifications
- DIMENSIONS:37 x 3.15 x 1.54 inches
- WEIGHT:52 ounces
- BLUETOOTH VERSION:3
- MAXIMUM TRANSMISSION RANGE: <= 15 M
- WORKING TEMPERATURE RANGE: -l0°C~45°C
- RF SENSITIVITY: -90dBm
- OPERATING FREQUENCY:40-2.48GHZ
- BLUETOOTH PROFILES SUPPORTED: HFP, HSP, A2DP, AVRCP
- MUSIC PLAYING TIME: About 6-8h
- CHARGE TIME: Around 1 hour
- BATTERY CAPACITY: 2*3.7V/30mAh
Introduction
The Lrecat Bluetooth Earbud uses dual-channel transmission and the most recent Bluetooth 5.3 technology to provide you with quicker transmission speeds, more stable connections, and a greater Bluetooth range. When removed from the charging case, the Wireless Earbud will automatically pair with the most recent device.
You may share J52 Earphones during meetings, phone calls, and music listening thanks to the wireless earphones with mic’s support for mono and dual stereo modes. A built-in microphone is included in each earbud for phone calls. The call might be clearer thanks to CVC8.0 HD clear call. A single charge of the wireless Bluetooth earbuds lasts for 6–8 hours, and the charging case that comes with them offers an extra 3–4 charges. The in-ear headphones’ overall operating time with a charging case is 32 hours. It can be fully charged in 1 hour when using the included USB-C charging cable for the Headphones.
More pleasurable music listening is made possible by Lrecat Bluetooth Earphones in Ear’s 13mm dynamic speakers and triple-layer composite diaphragms. The charging case and earbud’s power status are displayed on a digital LED display. The LED light will start to flash from 1 to 100 when the case is charging.
You won’t be under any strain to wear the 3g ultra-light ear buds for an extended period of time thanks to the pocket-sized charging case’s small size. Particularly for sports, exercise, and the gym, the ergonomic design offers a pleasant and secure fit that doesn’t protrude from your ears.
What’s in the Package
- 2 * True Wireless Earbuds (Left and Right)
- 1 * Type-C Charging Case
- 1 * Type-C Charging Cable (30cm)
- 1 * User Manual (EN, ES, FR, DE, IT)
ACTIVATE WARRANTY
Permanent replacement of damaged, defective item or missing components. Please activate via email below within 15 days. motastservice@gmail.com
Connect
- Open the lid (Earbuds auto power on)
- After open the phone Bluetooth, Click the <J52> to Pairing
Reset
- Delete the BT pairing information on the phone.
- Take the earbuds into the charging case.
- Close the lid to charge the earbuds.
- Take out the earbuds and wait for 20 seconds.
(If the above operation does not work, please try again)
Operation
Problem Handling
- CD Can be connected but there is no sound: Click the right earbuds to increase the volume.
- One of earbuds cannot be charge: Clean the charging contact of the earbuds and the charging case.
- One of the earbuds cannot be connected: Reset the earbuds. If you cannot solve the problem, please contact us in time.
Frequently Asked Questions
Yes, both the earbuds can be used independently.
Yes, they work with an iPad. These earbuds are compatible with any device that features a Bluetooth connection.
Yes, they are designed in a way to fit in to your ears perfectly.
Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.
Typically, a Bluetooth headset’s battery cannot be changed. The lithium battery powers the Bluetooth headset. A high-quality battery for a wireless Bluetooth headset can last for two to three years. And a cheap wireless Bluetooth headset typically costs approximately 1.
Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge.
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, and then selecting Forget This Device for each device.
When treated with care, wireless earphones can endure for a very long time. Most can last for two to three years, while some can even survive for five years or longer. Most manufacturers offer a fantastic guarantee in the event of an accident.
Your case and earbuds can both be charged simultaneously. Open the earphone charging case that was included with your headphones first.
For a long-lasting battery, avoid placing your wireless headset in the hot sun or the bitter cold. When not in use, always remember to put the headset back into the charging base. We are accustomed to a charging regimen for phones because we have been using them for the longest time.
Ensure that they are placed correctly on the charging case or stand. Some headphones are charged through a stand or case that has a cord attached to it rather than directly through a cable. If you experience this, check that your headphones are set up correctly so that they can receive a proper charge.
The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.
Here is what the Federal Communications Commission (FCC) of the United States has to say at this time regarding wireless technology and your health: “As of right now, there is no proof that using wireless devices causes cancer or other diseases.
Your ears become damp and sweaty when you wear earbuds. Each time you insert your earbuds, you push back the earwax that helps to keep your ears clean. The accumulation of wax in your ear canal may result in obstructions or impacted ear wax. Earbuds may cause more ear wax to accumulate.
Video
References
- User Manualmanual.tools
Buenas tardes.
The notices that the headphones send me are not in Spanish, how can I convert it to Spanish.
Buenas tardes.
Los avisos que me envian los auriculares no son en español, como puedo pasarlo a Español.
The notices that the headphones send me are not in Spanish, how can I convert it to Spanish.
Buenas tardes.
Los avisos que me envian los auriculares no son en español, como puedo pasarlo a Español.
How can I change the language of the voice prompts on my Lrecat J52 earbuds to Spanish?
Based on the standard operating procedures for Lrecat J52 earbuds, most models are pre-programmed with English voice prompts and do not support multiple language options for internal system alerts. However, you can try the following common method used to toggle languages on similar Bluetooth chipsets:
If these steps do not change the language to Spanish, it is likely that the Lrecat J52 firmware only supports English for its internal notifications. Please note that this does not affect the language of your music, videos, or phone calls, which will remain in the language set on your connected smartphone.
Read the full Q&A page
where can I buy silicone tips for j52 to adjust the fit in my ear?
Where can I purchase replacement silicone ear tips for the Lrecat J52 wireless earbuds?
The Lrecat J52 earbuds typically feature a semi-in-ear design that may not use traditional removable silicone tips. However, if your specific version uses them, the manufacturer does not usually sell individual replacement tips directly through the manual. You can generally find compatible universal silicone earbud tips on major online retailers like Amazon or eBay by searching for "universal silicone earbud tips" or "replacement tips for semi-in-ear Bluetooth earbuds."
If you are experiencing fit issues, please note that the J52 is designed to be ergonomic; ensure you are inserting them at the correct angle as shown in the manual's illustrations. If the product is new and missing parts, it is recommended to contact the seller through your original purchase platform for support.
Read the full Q&A page
wish there was a way to disable the touch funcations on the earbuds. they don’t seat well in my ear, but everytime I push them back in they interpret it as a command to skip to the next track.
How can I disable the touch functions on the Lrecat J52 wireless earbuds?
Based on the operational guide for the Lrecat J52 Wireless Earbuds, there is no built-in feature or dedicated app to disable the touch control functions. The touch sensors are integrated into the hardware to manage playback, calls, and volume.
To avoid accidental commands like skipping tracks while adjusting the fit, try the following:
Read the full Q&A page
Definitely need an option to turn off touch controls. Worst sht ever
How can I turn off the touch controls on the Lrecat J52 wireless earbuds?
Based on the available documentation for the Lrecat J52 Wireless Earbuds, there is no built-in hardware or software option to disable the touch control functionality. The touch sensors are integrated into the earbud surface to manage playback, volume, and calls.
To minimize accidental triggers, please consider the following tips:
Read the full Q&A page
Can someone tell me, why my earbuds J52 when i don’t listen music after 10 sec. start disconnected and then connected over and over again until i start listen music or talk on the phone?
Why do my Lrecat J52 earbuds repeatedly disconnect and reconnect when no audio is playing?
This behavior often occurs when the earbuds enter a power-saving mode or when there is a conflict with the Bluetooth 'Absolute Volume' or 'Power Management' settings on your device. To resolve this, please try the following steps:
If the issue persists, it may indicate a hardware defect in the Bluetooth 5.3 chip's idle state management, and you should contact the manufacturer for a warranty replacement.
Read the full Q&A page
Hello, which of the two “devices” should be touched and in the zone, if I receive a phone call and I have headphones on.
Hola, cual de los dos “aparatos” hay que tocar y en zona, si recibo una llamada telefónica y tengo puestos los auriculares.
Hola, cual de los dos "aparatos" hay que tocar y en zona, si recibo una llamada telefónica y tengo puestos los auriculares.
How do I answer a phone call using the Lrecat J52 earbuds and which earbud should I touch?
To answer an incoming phone call with your Lrecat J52 earbuds, you can use either the left (L) or the right (R) earbud. Both earbuds are equipped with a touch-sensitive zone for call management.
The touch-sensitive zone is located on the outer part of the earbud stem. Ensure you tap firmly and quickly to ensure the command is registered.
Read the full Q&A page