PRO1iaq True T705 comfort

View all PRO1 thermostat manual

Congratulations on purchasing a new thermostat. This thermostat was designed to the highest reliability and ease of use standards. Thank you for choosing Pro1.

Caution
Equipment damage hazard Do not operate the cooling system if the outdoor temperature is below 50˚ F (10˚ C) to prevent possible compressor damage.

Need Help?
For assistance with this product please visit http://www.pro1iaq.com or call Pro1 Customer Care toll-free at 888-Pro1iaq (776-1427) during normal business hours (Mon-Fri 9 AM – 6 PM Eastern)

Getting to know your thermostat

1. LCD
2. Glow in the Dark Light Button
3. Fan Switch
4. System Switch
5. Easy Change Battery Door
6. Setpoint Buttons
7. User Buttons

Important
The low battery indicator is displayed when the AA battery power is low. If the user fails to replace the battery within 21 days, the thermostat display will only show the low battery indicator as a final warning before the thermostat becomes inoperable.

Battery door information

THERMOSTAT OPERATION

Easy to use controls

Caution:
When the battery icon appears replace your batteries immediately. Failure to do so may result in your heating & cooling system becoming inoperable.

1. LCD Display:
   See page 2 for details about this display readout and icons.
2. Glow in the Dark Light Button:
   The glow-in-the-dark light button will self-illuminate for several hours after exposure to ambient light. This button turns on the display light when pressed.
3. Fan Switch:
   Select ON or AUTO. ON will run
   the fan continuously. AUTO will cycle the fan on only when the heating or cooling system is on.
4. System Switch:
   Selects the operation mode of your HVAC system. Selecting HEAT turns on the heat mode. Selecting COOL turns on the air conditioning mode. Selecting OFF turns both heating and cooling off.
5. Temperature Setpoint Buttons:
   Press the + or – buttons to select the desired room temperature.
6. User Buttons:
   Use these buttons to set up your programming options. Refer to the next page for instructions.

Set Time

Follow the steps below to set the current time: 

1. Press MENU
2. Press SET TIME
3. Day of the week will be flashing. Use the key to select the current day of the week.
4. Press NEXT STEP
5. The current hour is flashing.
   Use the key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected.
6. Press NEXT STEP
7. Minutes are now flashing.
   Use the key to select current minutes.
8. Press DONE when completed

Important:
You will see a TECH SET option after the MENU key is pressed.
This TECH SET key is for installer configuration and should NOT be changed unless you consult your Professional Heating and Air Conditioning Technician.

  Set Program Schedule

To customize your program schedule, follow these steps on Weekday:

1. Select HEAT or COOL from the system switch.
   Note: You have to program heat and cool each separately.
2. Press MENU
3. Press SET SCHED. Note: Monday-Friday is displayed and the WAKE icon is shown. You are now program-ming the wake time period for the weekday setting.
4. Time is flashing. Use the key to make your time selection for the weekday WAKE time period.
5. Press NEXT STEP
6. The setpoint temperature is flashing. Use the key to make your setpoint selection for the weekday wake period.
7. Press NEXT STEP
8. Repeat steps 4 through 7 for the weekday LEAVE time period, for the weekday RETURN time period, and for the weekday SLEEP time period.
   Saturday:
9. Repeat steps 4 through 7 for Saturday WAKE time period, for Saturday, LEAVE time period, for Saturday RETURN time period, and for Saturday SLEEP time period.
   Sunday:
10. Repeat steps 4 through 7 for Sunday WAKE time period, for Sunday, LEAVE time period, for the Sunday RETURN time period, and for the Sunday SLEEP time period.

PROGRAMMING THE THERMOSTAT

Filter Change Reminder
If your installing contractor has configured the thermostat to remind you when the air filter needs to be changed, you will see FILT in the display when your air filter needs changed. FILT will be shown in the display after your system has run long enough to require an air filter change.
Resetting the filter change reminder: When FILT reminder is displayed, you should change your air filter and reset the reminder by holding down the second button from the top left side of the thermostat for 3 seconds.

Temporary and Permanent Hold Feature

Temporary hold: The thermostat will display HOLD and RUN SCHED on the left of your screen when you press the key. If you do nothing, the temperature will remain at this setpoint temporarily until the next program period begins. Your program setpoint will then replace your temporary setpoint.
Permanent hold: If you press HOLD, you will see HOLD appear below the setpoint tem-perature in the display. The thermostat will now permanently stay at this setpoint and can be adjusted using the keys.
To return to program: Press RUN SCHED to exit either temporary or permanent hold.

CONTACT US AND WARRANTY INFORMATION

Contact Us Information 

Pro1 IAQ Inc.
1111 S. Glenstone
Suite 2-100
Springfield, MO 65804
Toll-free: 1-888-Pro1iaq (776-1427)
Toll Number (Outside the USA): 330-821-3600
Web: http://www.pro1iaq.com
Hours of Operation: Monday – Friday 9 AM – 6 PM Eastern

Warranty Registration:
Your new Pro1 thermostat has a 5 year limited warranty. You must register your warranty within 60 days of installation. You can register your new thermostat in 2 ways.

1. Go to www.pro1iaq.com, select warranty registration and fill out a short registration form. -or
2. Complete the form below and mail it to the address shown.

Pro1 IAQ Warranty Registration:

• Name:
• Address:
• City:
• State:
• Zip:
• Thermostat Model:
• Date Installed:

Complete the form and mail it to

Pro1 IAQ Inc. 1111 S. Glenstone Suite 2-100 Springfield, MO 65804

FAQS

What should I do if the outdoor temperature is below 50˚ F (10˚ C)?

Do not operate the cooling system to prevent possible compressor damage.

What should I do if I need assistance with my thermostat?

Visit http://www.pro1iaq.com or call Pro1 Customer Care toll-free at 888-Pro1iaq (776-1427) during normal business hours (Mon-Fri 9 AM – 6 PM Eastern). Q: What should I do when the low battery indicator is displayed? A: Replace the battery within 21 days. If the user fails to replace the battery, the thermostat display will only show the low battery indicator as a final warning before the thermostat becomes inoperable.

What is the PRO1iaq True T705 comfort thermostat?

The PRO1iaq True T705 comfort thermostat is a programmable thermostat designed to control the heating and cooling systems in residential or commercial buildings. It offers various features to enhance comfort and energy efficiency.

What are the main features of the PRO1iaq True T705 thermostat?

The features of the PRO1iaq True T705 thermostat may include:

• Programmable scheduling: Allows you to set different temperature preferences for different times of the day or week.
• Backlit display: Makes it easy to read the thermostat’s settings and temperature, even in low-light conditions.
• Temperature control: Lets you adjust and maintain the desired temperature in your space.
• Energy-saving mode: Helps optimize energy usage by automatically adjusting temperature settings when you’re away.
• Filter change reminder: Provides notifications to remind you when it’s time to replace the air filter in your HVAC system.

How do I program the PRO1iaq True T705 thermostat?

To program the PRO1iaq True T705 thermostat, follow these general steps:

• Press the Program button on the thermostat.
• Use the up and down arrows to select the desired time and temperature settings for each period of the day (such as morning, afternoon, evening, and night).
• Press the Program button again to move to the next programming period.
• Repeat the process for each programming period and each day of the week.
• Once you’ve finished programming, press the Run button to activate the programmed schedule.

Note: The exact programming steps and options may vary depending on your specific model and firmware version. It’s recommended to refer to the user manual provided with your PRO1iaq True T705 thermostat for detailed instructions.

How do I override the programmed schedule on the PRO1iaq True T705 thermostat?

To override the programmed schedule on the PRO1iaq True T705 thermostat temporarily, you can manually adjust the temperature using the up and down arrows on the thermostat. The thermostat will maintain this manually set temperature until you manually change it again or until the next programmed schedule period begins.

Can I control the PRO1iaq True T705 thermostat remotely?

The PRO1iaq True T705 thermostat is a non-Wi-Fi thermostat and does not have built-in remote control capabilities. It operates using the controls on the thermostat itself.

How do I replace the batteries in the PRO1iaq True T705 thermostat?

To replace the batteries in the PRO1iaq True T705 thermostat, follow these general steps:

• Remove the thermostat from its wall mounting plate by gently pulling it straight out.
• Open the battery compartment on the back of the thermostat.
• Remove the old batteries and dispose of them properly.
• Insert fresh batteries into the battery compartment, making sure to align them correctly with the polarity markings.
• Close the battery compartment.
• Reattach the thermostat to the wall mounting plate.

What should I do if I encounter issues or errors with the PRO1iaq True T705 thermostat?

If you experience any issues or errors with the PRO1iaq True T705 thermostat, refer to the troubleshooting section of the user manual provided with your thermostat. It will provide specific guidance on resolving common problems or contacting customer support for further assistance.

What should I do when the battery icon appears?

Replace your batteries immediately to prevent your heating & cooling system from becoming inoperable.

How do I set the current time on my thermostat?

Press MENU, then SET TIME. The day of the week will be flashing. Use the key to select the current day of the week. Press NEXT STEP. The current hour is flashing. Use the key to select the current hour. When using 12-hour time, make sure the correct a.m. or p.m. choice is selected. Press NEXT STEP. Minutes are now flashing. Use the key to select current minutes. Press DONE when completed.

How do I customize my program schedule?

Select HEAT or COOL from the system switch. Press MENU, then SET SCHED.
Note: Monday-Friday is displayed and the WAKE icon is shown. You are now programming the wake-time period for the weekday setting. Time is flashing. Use the key to make your time selection for the weekday WAKE time period. Press NEXT STEP. The setpoint temperature is flashing. Use the key to make your setpoint selection for the weekday wake period. Press NEXT STEP. Repeat steps 4 through 7 for the weekday LEAVE time period, for the weekday RETURN time period, and for the weekday SLEEP time period. Repeat steps 4 through 7 for the Saturday WAKE time period, for Saturday, LEAVE time period, for the Saturday RETURN time period, and for the Saturday SLEEP time period. Repeat steps 4 through 7 for the Sunday WAKE time period, for Sunday, the LEAVE time period, for the Sunday RETURN time period, and for the Sunday SLEEP time period.

How do I reset the filter change reminder?

When the FILT reminder is displayed, change your air filter and reset the reminder by holding down the second button from the top left side of the thermostat for 3 seconds.

What is the temporary and permanent hold feature?

Temporary hold: The thermostat will display HOLD and RUN SCHED on the left of your screen when you press the key. If you do nothing, the temperature will remain at this setpoint temporarily until the next program period begins. Your program setpoint will then replace your temporary setpoint. Permanent hold: If you press HOLD, you will see HOLD appear below the setpoint temperature in the display. The thermostat will now permanently stay at this setpoint and can be adjusted using the keys. To return to the program: Press RUN SCHED to exit either temporary or permanent hold.

What is the warranty on my Pro1 thermostat?

Your new Pro1 thermostat has a 5-year limited warranty. You must register your warranty within 60 days of installation.

VIDEO

https://thermostat.guide/pro1/pro1-t705-programable-thermostat-operation-manual/

References

• User Manual