Apps AQ Star App User Manual

Apps logo 1

Manual for AQ STAR

Diagram of installation

Process by steps·

  1. Connect the light and STAR Bluetooth controller.
  2. Connect the Bluetooth controller and adapter.
  3. Plug in the power adapter on the AC plug.
  4. The light will flash one time after powering up, which means powering up successfully.
  5. Use the AQ STAR application to search de ice nearby via the +on the right on the application page.
    Note: please create an account in a STAR to ensure the application can be used normally.

Apps AQ Star App

www.ledstaraq.com Apps AQ Star App - FIGURE

Sign in and log in for new consumersApps AQ Star App - Figure 1

Search and add devices nearby
Note: please ensure the devices are powered.Apps AQ Star App - Figure 2

Devices on listApps AQ Star App - Figure 3

List of scenesApps AQ Star App - Figure 4

Fast setting
This is for consumers who could make the setting quick and easy ways. Built-in SUNRISE, SUNSET, and DURATION for choices.Apps AQ Star App - Figure 5

Professional setting
There are 48-time points in every 24 hours, each time point can be separated set on R,G,B,W, and mix the color and CCT.

FCC STATEMENT :

This device complies with Pat 15 of the FCC Rules. Operation is subject to the following two conditions

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that nary

Warning
Changes or modifications not expressly ap000we1by the party rp00.ible tor 0orpaoe could void the user’s authority to operate the equipment
NOTE This equipment has been tested and found to 000ply with the limits for a Class B digital device, pursuant to Pt 15 of 04the FCC#Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses car radiate radio frequency 0gy an4, if noting. tad and used  n@cordanoe with the instructions may bas harmful interference tor8i 0orounicatons. however, there is no guarantee that interference wilt does not occur in a particular ins. talion. lf  this equipment 0es causes harmful interference to radio Or television reception, which can be determined by turning the equipment «net off and on, the user is encouraged to try to  correct the interference by one or more of the following measures reorient or relocate the receiving antenna Increase the separation between the equipment a deceiver
Connect the equipment to an outlet on a circuit different from that to which t receiver is connected
Consult the dealer or an experienced radio/tv technician for help
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 2Ocm between the radiator & your body

Apps sab logoRENPHO RF FM059HS WiFi Smart Foot Massager - icon 7 Ledstar AQ
Apps logo

Documents / Resources

PDF thumbnailAQ Star App
User Manual · AQ-S, AQS, 2A7P7-AQ-S, 2A7P7AQS, AQ Star, App, AQ Star App

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Перестала работать программа. Не видит устройства.

    Алексей Попов asks Перестала работать программа. Не видит устройства.
    Manuals+ clarified question
    Question

    The AQ Star app has stopped working and cannot detect my devices. How can I fix this?

    Answer

    If the AQ Star app is no longer detecting your devices, please follow these troubleshooting steps based on the manual:

    • Check Power: Ensure the light and the AQ STAR bluetooth controller are properly connected and plugged into an AC outlet. The light should flash once when powered up to indicate it is ready.
    • Enable Bluetooth: Verify that Bluetooth is enabled on your smartphone. The app uses Bluetooth 5.0 to communicate with the controller.
    • Search for Devices: Open the AQ Star application and use the "+" icon on the top right of the application page to search for nearby devices.
    • Account Registration: Ensure you have created an account and are logged in, as the manual notes this is required for the application to be used normally.
    • Reset Connection: Try unplugging the power adapter from the AC plug, waiting a few seconds, and plugging it back in to restart the controller's pairing mode.

    If the app itself is crashing or not opening, ensure you are using the latest version from the Apple App Store or Google Play Store.

  2. La mia plafoniera non cambia canali. Resta fissa su luce rossa

    Anonymous asks La mia plafoniera non cambia canali. Resta fissa su luce rossa
    Manuals+ clarified question
    Question

    Why is my ceiling light stuck on red and not changing channels?

    Answer

    If your light is stuck on a red color and not responding to channel changes, please try the following troubleshooting steps based on the AQ Star manual:

    • Check Bluetooth Connection: Ensure your phone's Bluetooth is enabled and that you are within range of the controller. The light should flash once when powered up to indicate the controller is active.
    • Verify Device Pairing: Open the AQ Star app, go to the 'Device' page, and use the '+' icon in the top right to search for and re-add your device if it is not appearing in the list.
    • Manual Mode Adjustment: Navigate to the 'Manual mode' or 'Fast setting' section in the app. Try moving the individual R (Red), G (Green), B (Blue), and W (White) sliders to see if the light responds to manual overrides.
    • Reset the Controller: Disconnect the power adapter from the AC plug, wait 30 seconds, and plug it back in to reboot the Bluetooth controller.
    • Check Professional Settings: If you have a schedule set in 'Pro_setting', a specific time point might be locked to 100% Red. Try clicking 'Reset' in the Professional setting screen to clear any stuck schedules.

    If the light remains stuck on red even after a power cycle and app reconnection, there may be a hardware fault with the controller or the LED driver.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.