SONOFF SwitchMan R5 Smart Controller User Manual

SONOFF-SwitchMan-R5-Smart-Controller-LOGO

SONOFF SwitchMan R5 Smart Controller

SONOFF-SwitchMan-R5-Smart-Controller-PRODUCT

Before using R5 please takeout the battery insulation sheet

Feature

RS is a 6-key scene remote controller and can work with the devices with •eWeLlnk-Remote” feature. When RS ls.:idded Into the g.atewaysuccessfully, it car, trigger other smart devices by setting Scene on eWelinkApp

Acid RS to “eWeLink-Remote” gateway

SONOFF-SwitchMan-R5-Smart-Controller-1

Enter the setting interface of “eWeLink-Remote” gateway, click “eWeLink-Remote sub-devices” and “add”, then trigger anv button on R5 to add successfullv.

Set scene control

SONOFF-SwitchMan-R5-Smart-Controller-2SONOFF-SwitchMan-R5-Smart-Controller-3

Product Parameter

  • Power supply: 6V (3V button cell x 2)
  • Battery model: CR2032
  • Product Size: 86x86x13.5mm
  • Model: R5
  • Casing material: PC Vo
  • Color: Dim Gray
  • Working temperature: 0°C- 40°C

Installation Methods

SONOFF-SwitchMan-R5-Smart-Controller-4

Scan the QR code or visit the website to learn about the newest user manual and help

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radic equipment type RS Is in compliance with Dir ective 2014/53/EU.The full text of the EU declaration of conformity Js available at the following lntemet address: https://sonoff.tech/usermanuals

Documents / Resources

PDF thumbnailSwitchMan R5 Smart Controller
User Manual · R5, 2APN5R5, SwitchMan R5 Smart Controller, SwitchMan R5, Smart Controller

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Hi,
    I have a R5 that cannot be communicated with a minir4 gateway.
    Is there a way to reset the R5 to factory default?
    Thank you

    你好,
    我有一个 R5,无法与 minir4 网关通信。
    有没有办法让R5恢复出厂设置?
    谢谢

    Randy Teo asks Hi,
    I have a R5 that cannot be communicated with a minir4 gateway.
    Is there a way to reset the R5 to factory default?
    Thank you

    你好,
    我有一个 R5,无法与 minir4 网关通信。
    有没有办法让R5恢复出厂设置?
    谢谢

    Manuals+ clarified question
    Question

    How do I reset the SONOFF SwitchMan R5 Smart Controller to factory defaults?

    Answer

    To reset the SONOFF SwitchMan R5 and clear its pairing information, follow these steps:

    1. Press and hold any button on the R5 for 5 seconds.
    2. The LED indicator should flash, indicating that the device is ready to be paired again or has been reset.

    Once reset, you can attempt to re-add it to your MINIR4 gateway. Ensure that the "eWeLink-Remote" gateway function is enabled on your MINIR4 in the eWeLink app before attempting to pair the R5. If the device still fails to communicate, check that the battery insulation sheet has been removed and that the batteries (CR2032) have sufficient charge.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.