ROWE EVENTS F2-S Remote Controller User Manual

Thank you for purchasing our products. Please read the following information carefully in order to fully use the product.
Product Features
This is an infrared controlled LED Flood Light with 120 degree angle, which is suitable for daily lighting, atmosphere lighting and decorative lighting.
Characteristic of IR Remote Control
- When using the remote, there is need to align to infrared signal acceptor.
- Made from high-end materials, it can cross such as cloth, glass, etc, but can’t cross wall and metal.
Precautions
- Please be sure to cut off the power before inserting or removing the lamp from holder.
- Not compatible with dimmers, the light will appear flashing, timing inaccuracy, shifting mode instability, etc.
- For the first time use, please remove the insulation slip from the remote control.
- If the control can’t work, please try to remove the battery and insert it into. If there is no remote, please email us to solve the problem.
IR Signal Acceptor


The radiation-emitting angle of the remote control is 1201n front of the receiver, the distance should be within 4-6 meters.
(Please point the remote control directly to the IR signal acceptor ,no barrier blocking between the remote and light.)

FEATURES
Those are preset programs, just one key to start.
The brightness of static color can be adjusted.
Colors can be programmed, the rhythm of color changing can be changed. Instruction of program:
- Long press (
) until the light goes out. - You can select the existing 7 colors.

and can select repeatedly, but up to 10 times. - Press (
) confirm and start.
The rhythm of color changing can be changed.
- Long press (
Timer, repeated everyday
Operation :
- Before setting the timer function, you should determine the color you need. If you need to change it, please change the color when you press the timer button.
- Press (
) one time means one hour, two times means two hours, and so on. - Press (
) confirm and start.
e.g. I need the light turn on with red color at 6 p.m, turn off at 12 p.m, repeated everyday. Operate as follows at 6 p.m:
- Set the light to red.
- Press (
) 6 times . - Press ( )
Delete the timer :
- Cut off the power .
- Press (
) 5 times, and the light will flash one time.
Color Wheel
- You can select the color from the 4 buttons of color wheel, until your favorite appears.
- Long press means change rapidly, tap means fine adjustment.
Store Key
The color on the color wheel can be stored, one key to start when needed. Operation teps:
- Press (
) OR (
) - Press the buttons of the color wheel until your favorite appears. Press the store key when you need next time.

If you find any problems that can’t not be solved or any suggestion to improve the products when using, please feel free to contact us, our after-sales team will offer you a 100% perfect service at any time.
Documents / Resources
![]() | F2-S Remote Controller |
References
- User Manualmanual.tools

I need new controller mine will not open to change the battery. How can I order controller on its own .
How can I order a replacement ROWE EVENTS F2-S remote controller?
The user manual for the ROWE EVENTS F2-S Remote Controller does not provide a direct link or phone number for ordering parts. However, it does state that if you encounter problems that cannot be solved, you should contact their after-sales team for assistance.
According to the manual, if you do not have a working remote, you should email the company to solve the problem. While a specific email address is not printed in the text of the manual, you should check your original purchase receipt, the product packaging, or the seller's contact information on the platform where you originally purchased the light (such as Amazon or eBay) to find the manufacturer's support email.
Before ordering a new one, ensure you are attempting to open the battery tray correctly: these remotes typically have a small latch on the bottom edge that must be pushed inward while simultaneously pulling the tray out.
Read the full Q&A page
HOW TO PROGRAM REMOTE TO OPERATE SEVERAL LIGHTS AT THE SAME TIME
How do I program the F2-S remote to operate several lights at the same time?
The ROWE EVENTS F2-S remote uses infrared (IR) signals to control the LED flood lights. Because it is an IR-based system, there is no complex "pairing" or "programming" required to link multiple lights to one remote. Instead, you can operate several lights at once by following these principles:
If you find that some lights are not responding while others are, try moving closer or adjusting the angle of the lights so their IR sensors are more tightly grouped together.
Read the full Q&A page