abxylute S8 Wireless Mobile Controller

Button Layout

Recommended Gaming Scenarios for Different Devices
| Gaming Scenarios | Android Devices* | iOS Devices |
| Local Games (controller) | HID Mode | Xinput Mode / PS Mode |
| Local Games (NO controller) | Mapping Mode | – |
| Emulator Games | NS Mode | PS Mode |
| Xbox Game Pass / Xbox | Xinput Mode | – |
| Ps Remote Play | PS Mode | PS Mode |
| GeForce Now | Xinput Mode / PS Mode | Xinput Mode / PS Mode |
| Moonlight | Xinput Mode / PS Mode | Xinput Mode / PS Mode |
| Gaming Scenarios | Android Devices | iOS Devices |
| PXPlay/XBXPlay | Xinput Mode / PS Mode | Xinput Mode / PS Mode |
| Nintendo Switch | NS Mode | |
| Direct PC | Only for test mode use | |
* Whether the Xinput mode and PS mode can vibrate normally depends on the kernel version used by the Android device.If vibration does not work correctly, please contact your device’s customer support.
Power ON / OFF
- When the device is powered off, short press the home button to power it on. After powering on, it will enter the last successfully used pairing mode and attempt to reconnect. If there is no operation and the reconnection is not successful within 30 seconds, it will automatically shut down.
- When the device is powered on, long press the home button for 10 seconds to shut it down.
Switch Controller Modes
NS Mode

- With the controller turned off, press and hold the Y button, then press and hold the Home button until the Home button indicator turns rose red and flashes rapidly to enter pairing mode.
- Turn on the Nintendo Switch and follow the switch instructions to complete the pairing options.
- When connecting to a non-Nintendo Switch device, pair it with the device named “Pro Controller” in the Bluetooth settings.
- After pairing is successful, the rose red Home button indicator will be on.
Xinput Mode 
- With the controller turned off, press and hold the X button, then press and hold the Home button until the Home button indicator turns blue and flashes rapidly to enter pairing mode.
- Please turn on the Bluetooth search function on the device you want to pair. In the list of available devices, select “Xbox Wireless Controller” to complete the pairing.
- After the pairing is successful, the blue Home button indicator light will be on.
PS Mode 
- With the controller turned off, press and hold the B button, then press and hold the Home button until the Home button indicator turns purple and flashes rapidly to enter pairing mode.
- Enable Bluetooth search function on the device that needs to be paired, select
- “Wireless Controller” for Android device and “DUALSHOCK 4 Wireless Controller” for iOS device from the available device list to complete the pairing.
- After the pairing is successful, the purple Home button indicator will be on.
HID Mode 
- With the controller turned off, press and hold the A button, then press and hold the Home button until the Home button indicator turns green and flashes rapidly to enter pairing mode.
- Enable the Bluetooth search function on the device to be paired, and select “Android Gamepad” in the list of available devices to complete the pairing.
- After the pairing is successful, the green Home button indicator will be on.
- Note: Each time the device is turned on, it will automatically reconnect to the last successfully connected device in the same mode.
S8 Connection Tutorial
https://abxylute.com/pages/abxy-s8-tutorial-setup-guide 
S8 Usage Tips 
https://abxylute.com/pages/abxy-s8-tutorial-little-tips
Download the abxy mobile app 
https://abxylute.com/pages/abxylute-application-download
Watch the Android mapping tutorial 
https://abxylute.com/pages/how-to-use-touchscreen-mapping
Turbo Mode
Start Turbo Mode 
- The A / B / X / Y / LT / RT / LB / RB keys can be used as Turbo keys.
- Press the desired key and the M key simultaneously to activate the Turbo mode for that key.
- To activate Turbo mode, press the desired button together with the M button.
- To disable Turbo mode, press the same combination again.
Removing Turbo Mode Settings
Press and hold the M key for 10 seconds to clear the turbo function of all keys. After clearing successfully, the Home key light will flash 4 times in succession and the motor will vibrate briefly once.
Turbo Speed 
- Long press the M button and use the left joystick to adjust the turbo speed.
- Three turbo speeds: 5 times per second, 10 times per second, and 20 times per second.
- After each successful switch, the Home button light flashes 4 times in succession and the motor vibrates briefly once.
Vibration Intensity Adjustment
Long press the M button and use the cross key to adjust the vibration intensity.
- Four vibration intensity levels: 0%, 40%, 70% and 100%.
- Each time you change the intensity level, the motor will vibrate at the corresponding strength.
- The vibration strength will remember the last adjustment. The default intensity for the first use is 70%.
Joystick Mode 
- Press and hold the left shoulder button, Select button and M button for 2 seconds to switch the joystick’s circle drawing mode.
- Supports both circular and square joystick movement modes. Press again to cycle between them.When the switch is successful, the home button light flashes 4 times in a row and the motor vibrates briefly once.
The default is pure circle mode.
Gyroscope Mapping 
- Press the left stick (L3) or the right stick (R3) for 2 seconds while holding the M mode button to turn on or off the gyroscope simulation function of the corresponding stick.
- When enabled, the current angle is set as the gyroscope’s starting position .After the setting is successful, the Home button light flashes 4 times in succession and the motor vibrates briefly once. This function will be turned off every time you shut down the device.
- Gyroscope compensation value, simulation method and other usage logic can be set through the abxy mobile app.
Macro Key
The default function of the left back button is to press the left joystick down, and the default function of the right back button is to press the right joystick down.
In the connected state, press M key + left back button for two seconds to enter the left back button macro key programming, and press M key + right back button to enter the right back button macro key programming state. Once in programming mode, the Home button will display a red breathing light.
- The function buttons that can be recorded are: left joystick, right joystick, A, B, X, Y, left shoulder button, right shoulder button, left trigger, right trigger, cross key, Select key, Start key.
- After recording is completed, press the corresponding back button again to end recording.
- If you need to clear the back button macro, you can press the back button immediately after starting recording, and it can be set to empty.
Quick Trigger 
- Press and hold the M mode button, and hold the R2 and L2 trigger buttons for 2 seconds to turn the quick trigger option on and off.
- After setting successfully, the home button light flashes 4 times in a row and the motor vibrates briefly once.
- This function will be disabled each time the controller is powered off.
Swap the left joystick and D-pad functions

- Press the M key and the Select key together for 2 seconds to swap the left joystick function and the cross key value.
- Press repeatedly to cycle between function settings. If the function is successfully switched, the LED light will flash once and the motor will vibrate briefly. This function will be restored every time the computer is turned off.
Calibration
Press and hold the right shoulder button + START button + Home button for three seconds to enter the controller calibration mode. The Home button indicator light turns red. Please complete the calibration in the following order:
- Slowly rotate both joysticks in full circles three times;
- Slowly press the left and right trigger buttons to the maximum stroke, repeat 3 times;
- Place the controller on a horizontal table, press the Home button, and the Home button light returns to its original color;
Reset
When the controller is powered on, press and hold the left back button + right back button + left shoulder button + Home button for five seconds to reset all the settings of the controller.
When the reset is successful, the Home button light flashes 4 times and the motor vibrates once.
Charging and power display 
- Press and hold the M key + Screenshot key for 2 seconds to view the current battery level.
- 0-25% power flashes once, 26%-50%power flashes twice, 51%-75% power flashes three times, 76%-100% power flashes four times.
- The Home button will flash red every 5 seconds while charging, and white every 10 seconds when fully charged.
- Automatically sleeps after the device is fully charged.
Turn off and on indicator light
Pressing the M key while pressing the right cross-pad button increases brightness; pressing the M key while pressing the left cross-pad button decreases brightness. Brightness is divided into three levels: 20%, 60%, and 100%.
When the brightness is at 20%, pressing and holding the M key and the left cross-pad button for 5 seconds will adjust the LED brightness to 0%. Pressing the M key again or restarting the device will restore the brightness to 20%.
Screenshot key function
The screenshot key presents different key values in different modes, and not all devices support the screenshot function.
| Mode | Function |
| NS Mode | Screenshot function, only Nintendo Switch can recognize it |
| PS Mode | Touchpad press key value |
| Xinput Mode | – |
| HID Mode | Common keys for taking screenshots on Android devices. Not all Android devices use common keys. |
Warranty and Support
Products purchased from authorized abxylute retailers are entitled to a limited warranty. Items with limited lifespans and subject to normal wear and tear, such as batteries, joysticks, and buttons, are excluded from warranty coverage. For more detailed information on the scope and duration of this limited warranty, please visit https://abxylute.com/pages/warranty-policy
- If you have any questions, please contact us at support@abxylute.com, and we will do our best to assist you promptly.
Join Our Community for More Fun
- Exclusive news/updates
- Tutorial and tips on abxylute
- Connect with other users and our team
- Discounts, community game contests, and more!
https://abxylute.com/pages/social-media

Documents / Resources
![]() | S8 Wireless Mobile Controller |
References
- User Manualmanual.tools
