NORTH EDGE APACHE-CF Smart Watch Instruction Manual

NORTH-EDGE-APACHE-CF-Smart-Watch (2)

NORTH EDGE APACHE-CF Smart Watch

NORTH-EDGE-APACHE-CF-Smart-Watch-product

Function Introduction

  • Time Function: Hour, minute, second, day of the week, month, date
  • 12/24 Hour Format
  • Automatic Calendar: Full auto calendar from 2000 to 2099
  • Step Counter Function
  • Barometric Pressure Measurement
  • Altitude Measurement
  • Compass
  • Alarm Function: (2 sets of alarms and hourly chime)
  • Stopwatch Function: 99 hours 59 minutes 59.99 seconds
  • (with 100 sets of Lap function)
  • Countdown (Timer) Function: 99 hours 59 minutes 59.99 seconds
  • Metronome Function
  • Dual Time (Second Time) Function
  • Low Battery Indicator Function
  • LED Backlight Function

NORTH-EDGE-APACHE-CF-Smart-Watch (25)

Product Function Modes

NORTH-EDGE-APACHE-CF-Smart-Watch (24)

  • In any mode, press the A key once to turn on the LED backlight for 3 seconds.
  • Press the B key to select the operation mode. In the Time mode, press and hold the E key for 2 seconds to toggle the upper display:
  • Day of the week → Temperature → Altitude graph → Sea level barometric pressure graph.
  • In the Time mode, press the C key to quickly enter the Altimeter mode.
  • In the Time mode, press the D key to quickly enter the Compass mode.
  • In the Time mode, press the E key to quickly enter the Barometer mode.
  • To exit the Barometer, Altimeter, or Compass modes, press the B key to return to the Normal Time mode.

Normal Time and Date Settings

  • In the Normal Time mode, press and hold the B key for 2 seconds until the “Seconds” flash, indicating that you have entered the setting status.
  • Press the B key to switch the setting item (flashing) as follows:

NORTH-EDGE-APACHE-CF-Smart-Watch (23)

  • Press the E key to increase the value; press and hold the E key for rapid incrementing.
  • Press the C key to decrease the value; press and hold the C key for rapid decrementing.
  • When the Seconds are flashing, press the E or C key to reset the seconds to 0.
  •  For the 12/24 hour format, press the E or C key to switch between 12-hour and 24-hour formats.
  • The resolution setting range is 1 to 10. Press the E or C key to adjust the display contrast (increase or decrease).
  •  Press and hold the B key for 2 seconds to exit the setting mode.
  • If no keys are pressed for 1 minute, it will automatically exit the setting mode.

Step Mode 

  • Step range: 0 ~ 999,999 Steps
  •  Calorie range: 0.0 ~ 99,999.9 Kcal
  • Distance display range: 0.00 ~ 9999.99 KM or 0.00 ~ 9999.99 Miles
  • Exercise time range: 0 ~ 24H
  •  In the step display screen, long press the C key for 2 seconds to turn the step function ON/OFF.
  • When the step function is enabled, a step icon will be displayed.
  • Press the E key to cycle through the displays:
  • Steps -> Distance -> Calories -> Exercise Time -> Steps.

NORTH-EDGE-APACHE-CF-Smart-Watch (22)

Pedometer Settings:

  • In the Pedometer mode, press the B key for 2 seconds until “Unit” flashes, indicating you have entered the setting status.
  • Press the B key to switch setting items: Unit -> Stride -> Weight -> (back to start).

NORTH-EDGE-APACHE-CF-Smart-Watch (21)

  • Press the E or C key to switch between Metric and Imperial units.
  • Press the E key to increase values; long press for rapid incrementing.
  • Press the C key to decrease values; long press for rapid decrementing.
  • Input weight: 20~200 kg or 44~441 lbs (Default: 75 kg or 165 lbs).
  • Input stride: 30~180 cm or 2~71 inches (Default: 70 cm or 28 inches).
  • Long press the B key for 2 seconds to exit settings.
  • Automatically exits settings after 1 minute of inactivity

History Record Query Mode

  • In the history record screen, press the C key to switch and query 7 days of historical data as shown below:
  • NORTH-EDGE-APACHE-CF-Smart-Watch (20)In the daily history record screen, press the E key to switch displayed data as NORTH-EDGE-APACHE-CF-Smart-Watch (19)
  • If there is no data for the day, pressing the C or E key is invalid.

Alarm Mode

  • In Alarm mode, press the E key to cycle through: AL1 -> AL2 -> Chime -> AL1.
  • Press the C key to turn the alarm or hourly chime ON/OFF.
  • In Alarm mode, long press the B key for 2 seconds until the “Minutes” flash, indicating you have entered the setting status.
  • Press the B key to toggle the setting item (flashing) as follows:
  • NORTH-EDGE-APACHE-CF-Smart-Watch (18) Press the E key to increase values; long press for rapid incrementing.
  • Press the C key to decrease values; long press for rapid decrementing.
  • Long press the B key for 2 seconds to exit settings.
  • Automatically exits settings after 1 minute of inactivity.
  • When the alarm is enabled, it will sound ”  NORTH-EDGE-APACHE-CF-Smart-Watch (17) ” for 20 seconds when the set time is reached. The alarm icon will flash on the screen during the alert.
  • Press any key to stop the alarm.

Stopwatch Mode

  • Stopwatch range: 99 hours, 59 minutes, 59.99 seconds.
  • In Stopwatch mode, press the E key to start or stop. When stopped, long press the C key for 2 seconds to reset to “0”.
  • Stopwatch Lap Time: While the stopwatch is running, press the C key to record a “LAP” time; the display will show the lap time for 15 seconds before returning to the running time. Press the C key again to record the next “LAP”. To stop the stopwatch, press the E key.
  • To enter the “LAP” memory mode, long press the B key for 2 seconds.
  • Press the C or E key to view recorded “LAP” times.
  • When 100 LAP records are full, if timing continues, the stopwatch time will be added to the last memory slot “LAP 100”.
  • In “LAP” memory mode, long press the B key for 2 seconds to exit and return to Stopwatch mode.
  •  While the stopwatch is running, press the B key to return to other modes;  the stopwatch will continue running in the background.
  •  When the stopwatch is stopped, it will automatically return to Normal Time mode after 5 minu

NORTH-EDGE-APACHE-CF-Smart-Watch (16)

Countdown Timer Function

  • Countdown range: 99 hours, 59 minutes, 59.99 seconds.
  •  In Countdown mode, press the E key to start or stop the countdown.
  • When stopped, press the C key to reset to the original preset value.
  •  When the countdown reaches “0”, it will beep “BB.BB.BB..” for 30 seconds.

Countdown Timer Settings:

  • In the stopped state, long press the B key for 2 seconds until the “Hour” flashes, indicating you have entered the setting status.
  • Press the B key to toggle the setting item (flashing) as follows:NORTH-EDGE-APACHE-CF-Smart-Watch (15)
  • Press the E key to increase values; long press for rapid incrementing.
  • Press the C key to decrease values; long press for rapid decrementing.
  • Long press the B key for 2 seconds to exit settings.
  • Automatically exits settings after 1 minute of inactivity.

Pacer Mode

  • In Pacer mode, press the E key to start/stop the pacer.
  • When stopped, long press the C key for 2 seconds to reset the pacer.
  •  If the pacer is not stopped, the counter will automatically restart from “0” when it reaches 99999.
  • In Pacer mode, long press the B key for 2 seconds to enter the pace frequency setting (range: 30~180)
  • NORTH-EDGE-APACHE-CF-Smart-Watch (14)Press the E key to increase values; long press for rapid incrementing.
  • Press the C key to decrease values; long press for rapid decrementing.
  • Long press the B key for 2 seconds to exit settings.
  • Automatically exits settings after 1 minute of inactivity.

Second Time Setting

  • In Second Time mode, long press the B key for 2 seconds until the “Minute” flashes, indicating you have entered the setting status.
  • Press the B key to move the setting item (flashing) as follows:
  • NORTH-EDGE-APACHE-CF-Smart-Watch (13)Press the E key to increase values; long press for rapid incrementing.
  • Press the C key to decrease values; long press for rapid decrementing.
  • Long press the B key for 2 seconds to exit settings.
  • Automatically exits settings after 1 minute of inactivity

Altitude Measurement Mode

  • NORTH-EDGE-APACHE-CF-Smart-Watch (12)In Normal Time mode, press the C key to enter Altitude Measurement mode.
  • Press the E key to switch the top row display: Temperature -> Altitude Trend.
  • When the top row displays the trend, short press the C key to query the corresponding altitude curve for each previous hour.
  • Long press the E key for 2 seconds to switch temperature and altitude units:
  • NORTH-EDGE-APACHE-CF-Smart-Watch (11)Automatically returns to Time mode after 24 hours of inactivity.
  • When the top row displays the curve, the first column flashes (indicating current altitude).

Altitude Settings
Long press the B key for 2 seconds to enter Altitude Setting mode. Press the B key to toggle the setting items as follows:

NORTH-EDGE-APACHE-CF-Smart-Watch (10)

Relative Altitude Value Setting (ZERO)
Press the E or C key to switch between “YES” and “NO”. Selecting “YES” means the relative altitude value is set to “0”. Selecting “NO” means using the default value, which is calculated based on the default sea level pressure of 1013.25mb. If “YES” is selected, the measurement result is relative altitude (Relatively), and a small “(r)” will be displayed on the screen. (Long press the B key for 2 seconds to confirm), and return to the normal altitude measurement mod

Input Current Altitude (ALTI)

  • Input the current altitude (ALTI).
  • Press the E key to increase values; long press for rapid incrementing.
  • Press the C key to decrease values; long press for rapid decrementing.
  • Long press the B key for 2 seconds to confirm and return to the normal altitude measured

Input Sea Level Pressure Value (SEAP)

  • Press the E key to increase values; long press for rapid incrementing.
  • Press the C key to decrease values; long press for rapid decrementing.
  • Long press the B key for 2 seconds to confirm and return to the normal altitude  measurement mode.

Factory Default Sea Level Pressure Value (FDEF)

  • Press the E or C key to switch between “YES” and “NO”. Selecting “YES” means using the default sea level pressure value of 1013.25mb.
  • (Long press the B key for 2 seconds to confirm), and return to the normal altitude measurement mode.

NORTH-EDGE-APACHE-CF-Smart-Watch (9)

Barometer Mode

  •  Normal Mode | Top displays<br>Temperature | Top displays Sea<br>Level Pressure | Top displays Barometric<br>Pressure Trend |
  • In Normal Time mode, press the E key to enter Barometric Pressure Measurement mode.
  • Press the E key to switch the top row display: Temperature -> Sea Level Pressure -> Pressure Trend.
  • When the top row displays the pressure trend, press the C key to view detailed hourly sea level pressure values.

Long press the E key for 2 seconds to switch temperature and pressure units:

NORTH-EDGE-APACHE-CF-Smart-Watch (11)

Automatically returns to Time mode after 24 hours of inactivity

Barometric Settings:
Long press the B key for 2 seconds to enter Barometric Pressure Setting mode, and press the B key to switch setting items.

NORTH-EDGE-APACHE-CF-Smart-Watch (8)

Input Current Air Pressure

  • Enter the current air pressure value (AIRP).
  • Press E to increase the value; hold E for rapid increase.
  • Press C to decrease the value; hold C for rapid decrease.
  • Hold B for 2 seconds to confirm and return to normal barometric mode.

Input Current Temperature (TEMP)

  •  Press E to increase; hold E for rapid increase.
  • Press C to decrease; hold C for rapid decrease.
  •  Hold B for 2 seconds to confirm and return to normal barometric mode.

Factory Default Pressure (FDEF)

  •  Press E or C to toggle between “YES” and “NO”. Select “YES” to restore factory default settings for pressure and temperature.
  • Hold B for 2 seconds to confirm and return to normal barometric mode.

Note: During temperature calibration, each press changes the value by 0.1°C (or 0.2°F).

Compass Mode

NORTH-EDGE-APACHE-CF-Smart-Watch (7)

  • In normal time mode, press D to enter compass measurement mode.
  •  Hold the watch horizontally and rotate it until the digital dial shows 0°.
  • The 12 o’clock position now points North. In compass mode, press C to toggle reverse display. When enabled, a “-” appears at the bottom left of the screen.
  •  When the display shows 0°, the 12 o’clock position points South.
  • The watch automatically exits measurement mode after 1 minute of inactivity. Press D to restart.

The table below explains the meaning of the abbreviations for each direction:

NORTH-EDGE-APACHE-CF-Smart-Watch (6)

Note: If the electronic compass has never been used before, please calibrate the compass

Compass Calibration Mode

NORTH-EDGE-APACHE-CF-Smart-Watch (3)

Auto Calibration Mode (CAL)

  • In compass mode, hold the B button for 2 seconds to enter the (CAL) calibration mode. Press the E or C button, then slowly rotate the watch.
  • Rotation direction (clockwise or counterclockwise) does not matter; simply rotate the watch two full turns in the same direction. The watch will automatically exit calibration mode and return to compass measurement mode. During calibration, 60 directional points will light up in sequence and then go out one by one to automatically confirm the calibration.

Note: After battery replacement, CAL mode starts automatically. Rotate the watch 2 full turns to complete calibration.

NORTH-EDGE-APACHE-CF-Smart-Watch (4)

Digital Calibration Mode (DEC)

  •  If you know the exact direction of North and find the deviation is too large after the (DILE) calibration above, you can perform a digital correction using the method below.
  • In compass mode, hold the B button for 2 seconds to enter (CAL) calibration mode, then press B again to enter (DEC) digital calibration mode. Press E to increase the value by 1, and C to decrease it by 1.
  • The maximum calibration range is ±90° (“W” “E” ±90°).
  • Hold the B button for 2 seconds to confirm the correction and return to normal 、 measurement mode.

General Instructions

Pressure Graph:** The curve displayed in pressure mode represents sea-level pressure, not actual measured pressure. The watch checks altitude changes every 15 minutes. If the change is less than 8 meters, it is considered a sea-level pressure fluctuation (altitude is constant), and the current sea-level pressure is calculated based on the previous 15 minutes of data. If the change is greater than 8 meters, it is considered climbing/movement, and sea-level pressure remains unchanged.

Measurement Frequency:

  • Altitude/Pressure Mode:** For the first 5 minutes after entering or exiting settings, it measures every 2 seconds. After 5 minutes, it measures every minute.
  • Other Modes:** Measures every 15 minutes.
  • Magnetic Declination:** When set to +, the display angle = measured angle + correction angle. When set to -, the display angle = measured angle – correction angle.

Weather Forecast:*

  • Checks weather hourly based on pressure changes over the previous 4 hours.
  • Rising pressure = Improving weather; Falling pressure = Worsening weather.
  • 4 Conditions:** Sunny, Partly Cloudy, Cloudy, Rainy.

Detection Method:**

  • Measures pressure at 59 min 59 sec to determine the hour.
  • Calculates the difference between the current hour and the previous hour (4 times total). Invalid if the absolute difference is ≥ 2.5 mbar. Averages valid differences to determine weather.

Reference Values (mbar/h):

  • Sunny: 0.8 ~ 2.5
  • Partly Cloudy: 0.5 ~ 0.8
  • Unchanged: -0.5 ~ 0.5
  • Cloudy: -1.0 ~ -0.5
  • Rain: -2.5 ~ -1.0

Precautions:
Temp is affected by body heat and sun. Remove watch, keep it cool/ ventilated, and wait 20-30 mins for an accurate reading.

Quality Standards:

  • Operating Temperature: -10°C ~ 60°C
  • Time Accuracy: ±30 seconds/month (at T=25°
  •  Thermometer Accuracy: ±2°C (range: -10°C ~ 60°C)
  •  Barometer Accuracy: ±3 mb (range: -10°C ~ 40°C)
  •  Altimeter Accuracy (per 1000m ascent): ±5m (range: -10°C ~ 40°C)
    Digital Compass Accuracy: ±11° (range: -10°C ~ 40°C)
  • Battery Type: CR2032 (Winston/Vinnic)

Warning: This watch is not waterproof for shower, bath or sauna. Avoid water exposure in these scenarios (CE)

Environmental Statement

  • To reduce the use of paper for environmental reasons, we provide electronic manuals in multiple languages in PDF, which you can download and save so that you can view them at any time, please scan the code to view or download the electronic manuals in multiple languages in PDF.
  • Them In English, Spanish, French, German, Italian,
  • Polish, Dutch, Swedish, Greek, Portuguese, Etc. If
  • You Need Manuals In More Languages, Please Contact Us.

Please scan the code to view

NORTH-EDGE-APACHE-CF-Smart-Watch (3)

Documents / Resources

PDF thumbnailAPACHE-CF Smart Watch
Instruction Manual · 260819-V2.0, APACHE-CF, Smartwatch, Watch

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.