TUYA Fully Automatic Smart Lock

Product Overview

Composition Structure of Fully Automatic Smart Lock
| No. | Name | Quantity |
|---|---|---|
| 01 | Blade Key | 2 |
| 02 | Front Lock Body | 1 |
| 03 | Fixed Pillar | 2 |
| 04 | Lock Core | 1 |
| 05 | Mainboard Connecting Wire | 1 |
| 06 | Door | — |
| 07 | Silicone Pad | 1 |
| 08 | Rear Bottom Plate | 1 |
| 09 | M5 Fixed Screw | 2 |
| 10 | Rear Panel Assembly | 1 |
| 11 | M4 Fixed Screw | 4 |
| 12 | Battery Cover | 1 |
| 13 | Lithium Battery | 1 |
| 14 | Lock Body | 1 |
Installation Instructions
Installation Sequence Diagram
Installation Steps:
- Begin by installing the lock body, securing it with four M5*6 screws;
- Install the lock core, using the screws provided, ensuring that the lock core’s rotating shaft copper strip faces the interior. The length of the copper strip exposed outside the door should be 18-20mm above the door plane (as shown in Figure 2). Cut the copper strip only after installing the lock core.
- Mount the front panel;
- Install the bottom plate (add a silicone pad), securing the front panel with two M5 screws;
- Connect the data cable between the front and back panels. Align the holes and attach the back panel, securing it with four M4 screws;
- Insert the lithium battery, close the battery cover, and complete the installation;

Product Features
- Door Opening Methods: Various methods such as fingerprint, password, IC card, mechanical key, WeChat Mini Program, etc., providing you with a diverse door-opening experience (actual configuration may vary).
- Fingerprint: Utilizes advanced semiconductor sensors with a 360-degree recognition angle, wide fingerprint collection area, high resolution, and effective prevention of fake fingerprints.
- Password: Employs stylish and advanced touchscreen keypad technology. It allows the addition of 12 unrelated digits before and after the correct password, effectively preventing the embarrassment of entering the password in a group setting.
- Dual Verification Mode: Allows setting up fingerprint, password, and card combinations for unlocking. Only when two users verify simultaneously can the door be opened, suitable for special occasions.
- User Management: Administrators have the highest authority (ordinary users can only open/close doors), with the ability to edit and set the lock. There can be up to 9 administrators (fingerprint, password, card), with a total capacity of 100 users.
- Alarm Function: The device includes anti-pry alarm, low-voltage alarm, and error attempt alarm.
- Backup Power Supply: When the battery is depleted, the lock can be emergency powered using a 5V mobile power supply.
Precautions
- After installing a new lock, perform a restore initialization operation to clear fingerprints entered during installation and debugging.
- The handle is a critical part for opening and closing the door. Its flexibility directly affects the use of the door lock, so please avoid hanging objects on the handle.
- When collecting fingerprints, use moderate finger pressure to prevent scratches on the fingerprint collection head.
- Avoid prolonged use of batteries. It is generally recommended to charge at least once every 3 months. Battery leakage can damage the smart lock.
- This lock uses an 8.4V high-performance lithium battery. When prompted with “low battery, please replace the battery” for the first time, it can still open the door about 100 times, depending on the battery capacity. Charge promptly to avoid inconvenience due to battery depletion.
- After five consecutive input errors via fingerprint, card, or password, the device will sound an alarm, and the lock will be unusable for 90 seconds.
Usage Instruction
Initialization Operation:
- Use a card pin to press the small hole in the middle of the back panel’s unlock/lock button for 5 seconds.
- The voice prompt will say “Initialization successful.”
- The factory password is “123456,” and after entering administrator information, the factory password “123456” will be automatically deleted.
Entering Lock Function Management (Offline Mode)
Adding/Deleting Users
Lock Settings
Adding Administrator
Wireless Settings
Maintenance Menu
Restore Factory Settings
Other Instructions
- If the wrong password is entered more than 5 times consecutively within five minutes, the keypad will be locked for 90 seconds. During this time, the system will not respond to any operations. You can enter the administrator mode through the back panel settings to unlock.
- Password Privacy Protection Function: When entering the password to unlock, input the password in the following format: XXXpasswordXXX. This adds some irrelevant characters before and after the password, then press # to confirm.
- After the voltage drops below 6.9V, the lock will automatically sound an alarm every time it is unlocked. After the alarm, the door lock can be unlocked 200 times. If this limit is exceeded, unlocking will be prohibited. Be sure to replace the batteries before reaching the unlocking limit.
- Human body sensing: There is a 10-second delay after each unlocking to prevent accidental activation when leaving.
- If the human body sensing is triggered 5 times, and no face or unlocking is detected within the specified time, the system will temporarily disable the sensing for 2 hours. It will automatically recover after 2 hours or during the next operation. This is to prevent frequent false wake-ups in high-traffic areas.
Scan the QR code with WeChat for mini-program door access. Note: Fingerprint lock time and administrator numeric password must be set before use.
TUYA APP
Doodle APP download, installation and door lock distribution network (2.4G)
- A smart lock must have at least one administrator added before it can be connected to the network.
- On the smart lock, press “*+#” to verify administrator information, press “2” for wireless settings, and press “1” to add network.
- Download and install the “TUYA” APP on your smartphone, then follow the instructions in the image below.


Remarks:
- How to use the Tuya APP to open the door remotely: ringing the doorbell on the lock will send instructions to Tuya APP Tuya, after receiving the instruction, the main page will pop up to request remote door opening.
- How to use the temporary password of Tuya APP: Select the status of the indicator light or hear the beep Ap Mode EZ Mode After the temporary password is generated in the Tuya APP, an instruction is issued. Press 9 # on the lock can be issued, APP pull down refresh display in use, you can use the temporary password
Troubleshooting
- Lock unusable after too many wrong inputs: After five consecutive input errors via fingerprint, card, or password, the device sounds an alarm and becomes unusable for 90 seconds. Wait for the lockout to end.
- Keypad locked after wrong password attempts: If the wrong password is entered more than 5 times consecutively within five minutes, the keypad is locked for 90 seconds and the system won’t respond. You can enter administrator mode through back panel settings to unlock.
- Restore initialization after installation/debugging: If fingerprints entered during installation/debugging need to be cleared, perform restore initialization to clear fingerprints.
- Low-voltage alarms and unlocking limit: When voltage drops below 6.9V, the lock sounds an alarm every time it is unlocked; after the alarm it can be unlocked about 200 times (then unlocking prohibited). Replace/charge batteries promptly before reaching the limit.
- Handle problems (opening/closing issues): Avoid hanging objects on the handle, as the handle is critical for opening and closing and its flexibility directly affects use.
- Fingerprint collection issues (scratch prevention): Use moderate finger pressure to prevent scratches on the fingerprint collection head.
- Human body sensing false wake-ups: If body sensing triggers 5 times and no face/unlocking is detected within the specified time, the system temporarily disables sensing for 2 hours, then recovers automatically.
Documents / Resources
![]() | Fully Automatic Smart Lock |
References
- Tuyasmartapp.tuya.com
- User Manualmanual.tools
Published: November 15, 2026
Updated: November 16, 2026

