2.4G Multi-Mode Remote Control Module Instruction Manual

Manual Text

"Warning"
Features 1. 2.4 GHz multi-mode remote control with approximately 300-meter range; compatible with both cars and boats 2. Five control modes that can be switched freely to suit different scenarios 3. Dual-stick fully proportional speed control; linear and precise throttle/steering with a smooth handling feel 4. 612V wide-voltage power supply; supports multi-to-one control for greater flexibility 5. Features XH2.0 and PH2.0 standard interfaces for a more secure and reliable connection Parameter Remote Control Input Voltage: 3.7V (includes Type-C charging port) Receiver Board Input Voltage: 612V (supports 2S and 3S power supplies) Supported Motor Loads: Supports 380, 370, 280, 180, 130, and TT motors, as well as N20 gear motors with a maximum speed of 13,000 RPM Motor Port Type: Supports only two-wire brushed motors Important Note: Does not support any high-speed or overpowered motors (No refunds or replacements will be provided for damage caused by overloading) Servo Support Compatible servos: 180 or 360 Full-proportional mode: Requires an 180 servo to control left/right proportional rotation; a 360 servo cannot control angle and can only control left/right rotation Jog Servos: Also require 180 servos; models such as the SG90, MG90S, and MG995 can be plugged directly into the board for use High-Power Servos: Require an external power supply to operate Helpful Tips Control Range: Approximately 300 meters in an unobstructed land environment; approximately 150 meters on water. All products undergo functional testing before shipment and are packaged and shipped after pairing. Upon receipt, simply install batteries in the remote control and the receiver board, and the motor is ready to use--convenient, quick, and easy to operate. This product is a DIY remote control kit; assembly and modification require some hands-on skills. Package include Remote control module * 1 Receiver module * 1 Rod antenna * 1 Flexible antenna * 1