ACASIS M002Plus Mini Case Docking User Manual

ACASIS logoM002Plus Mini Case Docking
User Manual

CASIS M002Plus Mini Case Docking

Mini Case Docking
M002Plus

Package Contents

  • Mini Case Docking
  • Thermal Pad
  • Rubber stopper
  • 40Gbps Cable
  • User Manual
  • Screwdrivers
  • PD 20W power supply

Product Diagrm

  1. CASIS M002Plus Mini Case Docking - figSSD indicator
  2. SD4.0
  3. TF4.0
  4.  HOST
  5. DP
  6. PD
  7. Computer Switch
  8. Docking Station indicator
  9. USB-A 10Gbps

Specifications

Interface Parameters
DP 4K144Hz
USB-A 3.1 10Gbps
TF/SD TF/SD 4.0
PD PD 20W
M.2 M.2 NVMe(M Key/B&M Key) Max 40Gbps
Switch Short press to turn on the product, long press to turn off the product

Cautionary

  1. The theoretical read speed of a single M.2 drive is 40 Gbps. When connected to a display, the read speed may decrease due to video bandwidth usage, which is a normal occurrence!
  2. This product supports M.2 NVMe (M Key/B&M Key) solid-state drives only and does not support M.2 NGFF (B Key/B&M Key).
  3. If you perform a formatting operation, please back up your data in advance to prevent data loss!
  4. When replacing the hard drive, ensure the power is turned off to prevent damage from live operations!
  5. Ensure the product is powered by the original power supply.
  6. Ensure your hard drive is formatted as APFS/exFAT. Otherwise, it cannot be read on the M4/M4Pro.

Product connection

CASIS M002Plus Mini Case Docking - fig1
Installation Instruction

Step1: Remove screws (computer installation steps)

  1. Use a screwdriver to remove the four screws on the bottom of the product.
  2. Remove the bottom cover of the product.

CASIS M002Plus Mini Case Docking - fig2

Step2: Load into computer (computer installation steps)

  1. Make sure the computer power-on button matches the product’s auxiliary power-on button.
  2.  Install the computer flush, install the bottom cover and tighten the four screws at the bottom.

CASIS M002Plus Mini Case Docking - fig3

Step3: Unscrew the hard disk cover screws (Single hard drive installation steps)

  1. Unscrew the hard disk top cover screws.
  2. Mount the hard disk at 45°, apply the thermal paste and secure it with a rubber plug.CASIS M002Plus Mini Case Docking - fig4
  3. Snap back the cover and tighten the screws.CASIS M002Plus Mini Case Docking - fig5

Step4: connection line.

  1. Access the power supply to the PD interface, HOST access to the computer Thunderbolt interface.CASIS M002Plus Mini Case Docking - fig6
  2. Just turn on your computer and you’re ready to go.CASIS M002Plus Mini Case Docking - fig7

FAQ

  1. Why can’t the hard drive appear on the computer?
    ① Please check if the hard drive is M.2 NVMe M Key/B+M Key and properly inserted into the slot.
    ② Please check if your hard drive is displayed in “Disk Utility”.
    Mac OS: Type “Disk Utility” in the desktop search bar and press enter.
    ③ If the hard drive is brand new, it needs to be formatted and initialized.
    For Mac OS, follow these steps:
    (1) After connecting it to the enclosure, a prompt will appear.
    Right-click “Initialize” to start.
    (2) Right-click “Erase”, and a pop-up window will appear.
    (3) Right-click “Erase” in the pop-up window to complete SSD initialization.
    For Windows OS, follow these steps (if you have Windows installed):
    (1) Right-click on “This PC”, go to Manage -> Disk Management Initialize Disk.
    (2) Right-click on the unallocated space, then click “New Simple Volume”. Follow the prompts to select “Next” multiple times, then click “Finish”.
    ④ If the hard disk indicator is not lit, please replace the hard drive (preferably a known good one) to ensure the hard drive is not faulty.
  2. How to connect multiple monitors?
    ①. Mac MINI M4/M4pro officially supports up to three monitors.
    2. It is recommended to use the two DP interfaces on the Docking Station plus the HDMI interface on the Mac mini to connect three monitors.
  3. What should be noted when using the product?
    1. Please use the original PD30W power adapter and connect it to the interface marked with PD before use!
    2. The M.2 hard drive interface does not support hot-swapping! Ensure the product is turned off when replacing the hard drive!
    3. When using the product to connect dual monitors, the DP signal will occupy part of the bandwidth, causing the hard drive speed to decrease. This is normal.
    4. Please ensure your hard drive is formatted as APFS/exFAT, otherwise it cannot be read on M4/M4Pro.
    5. This product only supports M.2 NVMe (M Key/B&M Key).

Cautions

  • Please avoid using it in high temperature, low temperature, humidity, dusty and long-term exposure to sunlight.
  • Keep the product out of the reach of children and do not allow children to use the product unsupervised.
  • Do not disassemble or repair the product and accessories without authorization.

ACASIS logo

CASIS M002Plus Mini Case Docking - icon

Documents / Resources

PDF thumbnailM002Plus Mini Case Docking
User Manual · ACASIS, M002Plus, Docking Station, Computer Case

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.