Electactic CM7204CY-UL Coffee Maker User Manual

Electactic CM7204CY-UL Coffee Maker

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.
2.  Do not touch hot surfaces. Use handles or knobs.
3. To protect against fire, electric shock, and injury to persons, do not immerse the cord, plug, or appliance in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from the outlet when not in use and before cleaning. Allow the appliance to cool before putting on or taking off parts, and before cleaning.
6. Do not operate the appliance with a damaged cord or plug, after the appliance malfunctions, or after it has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
8. Do not use outdoors.
9.  Do not let the cord hang over the edge of a table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11. Turn the appliance OFF, then unplug it from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull it from the outlet. Never pull on the power cord.
12.  Do not use the appliance for anything other than its intended use. For household use only.
13. Make sure the portafilter is securely turned to the locked position before brewing. Do not detach the portafilter while the brewing cycle is in progress.
14.  Scalding may occur if the portafilter is removed during the brewing cycle.
15. WARNING: To avoid the risk of injury, do not open the brew chamber during the brewing process.
16. This appliance is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
18.  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
19. The coffee maker shall not be placed in a cabinet when in use.
20. Cleaning and user maintenance shall not be performed by children without supervision.
21. WARNING: The filling aperture must not be opened during use.
22. Misuse of this coffee maker may cause burns, electric shock, or mechanical injury. Always follow the operating instructions.
23. The heating element surfaces and adjacent metal parts remain hot after use. Allow the appliance to cool before touching or cleaning these parts.
24. Avoid contacting moving parts. Do not attempt to defeat any safety interlock mechanisms.
25. Do not operate the appliance with a damaged cord or plug, after the appliance malfunctions, or after it has been dropped or damaged in any manner. Contact the manufacturer or an authorized service center for information on examination, repair, or adjustment.
26. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
27.  Check the bean hopper for foreign objects before use.
28. This appliance has a polarized plug, with one blade wider than the other. To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
29.  A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
    Extension cords are available and may be used if care is exercised in their use.
    If an extension cord is used:
    1. The marked electrical rating of the extension cord must be at least as great as the electrical rating of the appliance.
    2. The longer cord must be arranged so that it will not drape over the countertop or tabletop, where it can be pulled on by children or tripped over.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

WARNINGS

Pressure Warning

• To prevent burns, scalding, personal injury, or damage to the appliance, do not remove the water tank or portafilter while the appliance is brewing coffee, producing steam, or under pressure.
• Before removing the portafilter, make sure the brewing cycle has stopped and the appliance has returned to standby mode.
• Turn off the appliance before adding water to the water tank.
• Before brewing, make sure the portafilter is properly inserted and turned to the locked position. An improperly locked portafilter may loosen under pressure and cause personal injury.

High Temperature Warning

• During operation, do not place your hands or other body parts under the portafilter or steam/hot water wand. Hot water and steam may cause burns.
• Do not touch the steam/hot water wand with your hands or other body parts during or immediately after use. The wand becomes hot and may cause burns.
• Move the steam/hot water wand only by holding the silicone sleeve.

KNOW YOUR COFFEE MAKER

Specifications

Control Panel

NOTE

• Time Display displays the grinding time.
• Pressure Gauge Indicates the brewing pressure during coffee extraction.
• Temperature Display displays the current temperature during preheating and operation.

Steam/Hot Water Control Knob

1. Turn the knob to the ON position to dispense steam or hot water.
2. Turn the knob to the OFF position to stop steam or hot water dispensing.
   NOTE: Make sure the steam/hot water control knob is in the OFF position before turning on the appliance, brewing coffee, or starting any coffee function.

Grind Size Adjustment Knob

• The grind size adjustment knob rotates approximately 214° and allows you to adjust the grind size from fine to coarse.
• To adjust the grind size, turn the knob until the indicator tab points to the desired setting on the scale.
• The OPEN position is used for removing or installing the burr assembly.
• The LOCK position indicates that the burr assembly is locked.
• For best results, start within the OPTIMAL range and adjust as needed according to the coffee beans, roast level, and desired taste.

NOTE: The grinder will not operate when the knob is positioned anywhere between OPEN and LOCK.

Measuring Spoon with Tamper

1. Use the tamper end of the measuring spoon to tamp the ground coffee evenly in the portafilter.
2.  When the edge of the tamper is level with the rim of the portafilter, the amount of ground coffee is correct.

BEFORE FIRST USE

Before first use, or if the appliance has not been used for an extended period of time, follow the steps below to rinse the internal water system and prepare the appliance for use.

1. Remove all packaging materials, stickers, and labels.
2. Check that all accessories are complete and undamaged
3. Remove the water tank.
4. Remove the red rubber stopper from the water tank base
5. Fill the water tank with clean water. Do not exceed the MAX fill line.
6. Reinstall the water tank securely and close the water tank lid.
7. Install the burr assembly
   •  Turn the grind size adjustment knob to the OPEN position.
   • Align the tabs on the burr assembly with the slots in the grinder chamber, then press the burr assembly down fully.
   • Turn the grind size adjustment knob to the LOCK position to secure the burr assembly.
8. Install the bean hopper.
   •  Align the arrow mark with the unlock mark on the appliance.
   • Press the bean hopper down, then turn it clockwise until it locks into place.
     
9. Install the single-shot filter basket or double-shot filter basket into the portafilter as needed. Do not add ground coffee at this stage.
10. Align the portafilter handle with the unlock mark  on the brew head before installation. Keep the portafilter level, then turn it counterclockwise toward the lock  position until it is securely locked in place.
    
11. Place a cup on the drip tray.
12. Make sure the steam/hot water control knob is in the OFF position.
13.  Plug the appliance into a 120 V AC wall outlet.
14. Press the ON/OFF Button once. All button indicators and displays will illuminate.
15. Press  the Single-Shot Espresso Button, Double-Shot Espresso Button, or  Americano Button to preheat the appliance.
16. During preheating the Single-Shot Espresso Button, Double-Shot Espresso Button, Americano Button and Steam Button indicators will flash. When preheating is complete, the four indicators will stop flashing and remain steadily lit.
17. Wait until preheating is complete before using the coffee function.
18. Direct the steam/hot water wand toward the drip tray, or place a cup under the wand to collect the water. Turn the steam/hot water control knob to the ON position to prime the internal water system and rinse the steam/hot water channel. Once water dispenses steadily from the wand, turn the knob back to the OFF position.
19. Press the Single-Shot Espresso Button, Double-Shot Espresso Button or Americano Button to rinse the internal water system. Place a cup under the brew head to collect the dispensed water.
20.  When water stops dispensing, empty the cup and drip tray.
21. Clean all removable parts thoroughly with warm water and dry them completely.

WARNING: Do not place hands or other body parts near the portafilter, brew head, or steam wand while hot water is dispensing. Hot water and steam may cause burns.

Coffee Bean Selection

• For the best flavor and aroma, use fresh, recently roasted coffee beans and grind them immediately before brewing.
• Espresso usually requires finely ground, dark-roasted coffee. French roast or espresso roast coffee beans are recommended.
• Pre-ground coffee loses aroma quickly after opening. If pre-ground coffee is used, store it in an airtight container in a cool, dry place. Do not store coffee in the refrigerator or freezer.

Grind Size Selection

• Grind size is important for espresso extraction and may require adjustment.
• The correct grind should look similar to table salt.
• If the grind is too fine, coffee may dispense slowly, intermittently, or may not dispense at all.
• If the grind is too coarse, water may flow through the coffee too quickly, resulting in weak flavor and poor aroma.
• Adjust the grind size according to the type, roast level, and freshness of the coffee beans.
• For freshly roasted coffee beans, especially beans roasted within the past month, the grind setting may need to be adjusted more carefully.
• To prevent coffee beans from absorbing moisture and affecting grinding performance and coffee taste, do not put too many coffee beans in the bean hopper.

Grinding Coffee Beans

1. Add an appropriate amount of coffee beans to the bean hopper.
2. Open the bean hopper gate so the coffee beans can enter the grinding system.
3. Turn the grind size adjustment knob to the desired grind size setting.
4. Install the single-shot or double-shot filter basket into the portafilter, and place the portafilter into the portafilter holder.

OPERATING INSTRUCTIONS

Single-Shot Grind
Press the Single-Shot Grind Button. The grinder will start and automatically stop when the preset amount of ground coffee has been dispensed.

NOTE: The default grinding time for the Single-Shot Grind Button is approximately 4 seconds.

Double-Shot Grind
Press the Double-Shot Grind Button. The grinder will start and automatically  stop when the preset amount of ground coffee has been dispensed.

NOTE: The default grinding time for the Double-Shot Grind Button is approximately 8 seconds.

1.  Remove the portafilter from the portafilter holder.
2. Use the tamper to tamp the ground coffee evenly.
3.  Wipe any excess ground coffee from the rim of the portafilter.
4.  Attach the portafilter to the brew head and turn it counterclockwise until it locks securely into place.
   NOTE: If the bean hopper is not installed correctly, the Single-Shot Grind Button and Double-Shot Grind Button indicators will not illuminate after the appliance  is turned on, and the grinder will not operate.

Custom Grinding Time Settings
You can customize the grinding time for the Single-Shot Grind Button or Double-Shot Grind Button. The adjustable grinding time range is 2 to 15 seconds.

1. Press and hold the Single-Shot Grind Button or Double-Shot Grind Button for 3 seconds
2. The grinder will start dispensing ground coffee into the portafilter, and the time display will begin counting from 0.
3.  When the desired amount of ground coffee has been dispensed, press the same button again.
4. The appliance will save the current grinding time.

NOTE: For better coffee flavor, preheat the appliance, portafilter, filter basket, and cup before brewing. Refer to steps 9–20 in the “Before First Use” section.

Making Espresso or Americano

1. After preheating the appliance, grinding and tamping the coffee, and locking the portafilter in place, place a cup on the drip tray.
2.  To make espresso, press the Single-Shot Espresso Button or Double-Shot Espresso Button.
3. To make Americano, press  the Americano Button.
4. The appliance will start brewing.
5.  The appliance will stop automatically when brewing is complete.
6.  After brewing, allow the portafilter and filter basket to cool before removing them.
7.  Turn the portafilter clockwise to remove it from the brew head.
8. Empty the used coffee grounds and rinse the portafilter and filter basket thoroughly.
   WARNING: Do not leave the appliance unattended during brewing.
   WARNING: Metal parts may be hot after brewing. Allow the portafilter and filter basket to cool before touching or removing them.

Cold Brew

1. Make sure the water tank is filled with clean water and securely installed. Do not exceed the MAX fill line.
2. Install the filter basket into the portafilter.
3. Attach the portafilter to the brew head and turn it until it locks securely into place.
4.  Place a cup on the drip tray.
5. Make sure the steam/hot water control knob is in the OFF position.
6. Press the  ON/OFF Button once. All button indicators will illuminate.
7. Press  the Cold Brew Button to enter cold brew mode.
8. Press  the Single-Shot Espresso Button or Double-Shot Espresso Button to extract coffee at room temperature. Ice water may also be used for chilled coffee extraction.
   NOTE: If the appliance has already been preheated or has recently used a hot brew function, the appliance may need to cool before cold brew extraction.

Frothing Milk 

• A cappuccino is made by adding frothed milk to espresso.
• The portafilter must be installed securely before using the steam function.
• Before frothing milk, release steam for approximately 10 seconds.

1. Prepare espresso first.
2. Press the Steam Button. The Steam Button indicator will flash.
3. When the Steam Button indicator stops flashing and remains steadily lit, preheating for steam is complete.
4.  Fill a milk frothing pitcher with approximately 3.5–5 fl oz (100–150 mL) of cold whole milk for each cappuccino.
   NOTE: Use the included milk frothing pitcher. Milk may increase up to twice its original volume during frothing. Do not fill the pitcher more than halfway.
5.  Insert the steam/hot water wand approximately 0.79 in (2 cm) into the milk.
6. Froth the milk by moving the pitcher gently up and down.
7. When   the desired milk foam is achieved, turn the steam/hot water control knob back to the OFF position.
8. Pour the frothed milk into the prepared espresso.
9. Sweeten to taste. If desired, sprinkle a small amount of cocoa powder on top. WARNING: Use caution when operating the steam function. Hot steam may cause burns or injury.
10. NOTE: Clean the steam/hot water wand with a damp sponge immediately after steam stops dispensing. Use caution, as the wand may still be hot.

Cooling Down After Steaming

• After frothing milk, the appliance may be too hot to brew coffee immediately.
• If you press an Espresso button and the appliance temperature is too high, the indicator will flash rapidly. Cool down the appliance as follows before brewing coffee again:
  1. Place an empty cup under the steam/hot water wand.
  2. Turn the steam/hot water control knob to the ON position.
  3. Allow hot water and steam to purge from the steam/hot water wand.
  4. When the appliance stops purging automatically, turn the steam/hot water control knob back to the OFF position.
  5. The appliance is ready for the next brew.
     If you do not want to brew coffee again, allow the appliance to cool naturally

Dispensing Hot Water

1. Place a cup or mug under the steam/hot water wand.
2. Turn the steam/hot water control knob to the ON position.
3. Hot water will dispense from the steam/hot water wand.
4.  Turn the steam/hot water control knob back to the OFF position to stop dispensing.
   WARNING: Hot water and steam may cause burns. Use caution when dispensing hot water.

Custom Brewing Time Settings
You can customize the brewing time for the Single-Shot Espresso Button and Double-Shot Espresso Button. The adjustable dispensing time for a single shot is 10 to 30 seconds. The adjustable dispensing time for a double shot is 20 to 60 seconds.

1. Make sure the water tank contains enough clean water and is properly installed. Then press the ON/OFF Button to turn on the appliance and place a cup on the drip tray.
2. After preheating is complete, press and hold the function button to be adjusted, either the Single-Shot Espresso Button or Double-Shot Espresso Button, for 3 seconds.
3. The selected button will flash, and the appliance will start pumping water.
4. When the desired brewing time has been reached, press the same function button again.
5. The appliance will stop pumping water and save the current brewing time.
   •  If the set brewing time is below the minimum value, the appliance will save the minimum brewing time.
   • If the appliance stops automatically after reaching the maximum dispensing time, the maximum brewing time will be saved.

Restoring Factory Settings
To restore all grinding and extraction functions to the default time settings, press and hold the Cold Brew Button and Americano Button at the same time for 3 seconds.

High Temperature Alarm Function

Cold Brew Mode

• If hot brew mode has been used or the appliance has been preheated, the internal boiler temperature may be too high for cold brew mode.
• When using cold brew mode, if the  Single-Shot Espresso and Double-Shot Espresso Button indicators flash, turn the steam/hot water control knob to the ON position to dispense water and cool the appliance.
• When water pumping stops automatically, turn the knob to the OFF position and press the  Single-Shot Espresso Button or Double-Shot Espresso Button again to continue cold brew extraction.

Hot Brew Mode

• After using the steam function, the appliance may be too hot for coffee extraction.
•  If  the Single-Shot Espresso and  Double-Shot Espresso Button indicators flash after pressing a coffee function button, turn the steam/hot water control knob to the ON position to pump water and cool the appliance.
•  When water pumping stops automatically, turn the knob to the OFF position and press the Single-Shot Espresso Button, Double-Shot Espresso Button, or  Americano Button again to resume extraction.

Auto Shut-Off Function

•  After the appliance is turned on, it will shut off automatically if no operation is performed within 2 minutes. All button indicators except the ON/OFF Button indicator will turn off. Press  the ON/OFF Button to restart the appliance.
•  After a function cycle is complete, if no operation is performed within 29 minutes, the appliance will shut off automatically. All button indicators except the ON/OFF Button indicator will turn off. Press the ON/OFF Button to restart the appliance.

CLEANING AND MAINTENANCE

Daily Cleaning

1. Turn the steam/hot water control knob to the OFF position.
2. Turn off the appliance and unplug it from the wall outlet.
3.  Allow the appliance to cool completely before cleaning.
4.  Clean the exterior surface regularly with a soft, damp cloth.
5.  Clean the water tank, drip tray, and drip plate regularly, then dry them thoroughly.
6.  Clean the portafilter and filter baskets with warm water and mild detergent.
7.  Clean all removable accessories and dry them thoroughly before storage.
   NOTE: Do not clean the appliance with alcohol, solvents, abrasive cleaners, or metal scouring pads.
   WARNING: Never immerse the appliance housing, power cord, or plug in water or any other liquid.

Cleaning the Grinding System

1. Turn the bean hopper counterclockwise to the unlock position, then lift it upward to remove it.
2. Turn the grind size adjustment knob clockwise until the indicator tab points to the OPEN position.
3. Hold the handle of the removable burr assembly and lift it out.
4. Use the cleaning brush or a vacuum cleaner to remove any remaining ground coffee from the grinder chamber, burr area, and ground coffee chute.
5. If ground coffee dispenses more slowly than usual, or if ground coffee scatters due to static, clean the anti-static device and the ground coffee outlet with the cleaning brush.
6.  Reinstall the removable burr assembly, then reinstall the bean hopper secure-ly before using the grinder again.
   NOTE: Make sure all parts are completely dry before reinstalling them.

Cleaning Mineral Deposits / Descaling

• After the coffee, hot water, and steam functions have been used for a cumulative total of 500 cyclesthe Descale Button indicator will flash when the appliance is powered on and a coffee function button is pressed to enter preheating mode. This indicates that descaling is required.
• When preheating is complete the Descale Button indicator will remain steadily lit.

1.  Place one cup on the drip tray and another container under the steam/hot water wand. Add an appropriate amount of descaling solution and clean water to the water tank, then preheat the appliance.
2. After preheating is complete, press and hold  the Descale Button to start automatic descaling.
3.  The descaling process will run four cycles of pumping water and resting.
4. After the four cycles are complete, the appliance will stop automatically and return to standby mode. The descaling alert will be canceled.
   NOTE: During descaling, if the steam/hot water control knob is closed, water will flow from the brew head. If the knob is open, water will flow from the steam wand. You may select the desired outlet during descaling.

TROUBLESHOOTING

If the problem cannot be resolved, do not disassemble the appliance by yourself. Contact customer service or an authorized service center.