Urmet Onyx Touchscreen Entry Panel Instructions

Urmet-logo

Urmet Onyx Touchscreen Entry Panel

Urmet-Onyx-Touchscreen-Entry-Panel-product

Overview

  • Onyx is a digital touchscreen Entry Panel, that supports Fob, pincode, QR code & facial recognition access for users.
  • With 2 dedicated facial recognition cameras, Onyx features liveness detection, and can distinguish between a real-person and a photograph – preventing attempts at unauthorised entry by holding up a photo.
  • Visitors call the end-user on the touchscreen by entering a name, number or by searching through the built-in phonebook.
  • Onyx also supports Visitor passes, which are set up by the end-user, and allow visitors access to the building – even if end-user is not present. Visitors simply enter their PIN code on the touchscreen or scan their QR code, and if their pass is valid, Onyx grants them access to the building.
  • Provides 2-way audio & 1-way video communication as standard, but does support 2-way video communication if used with our VOG7 & Max10 monitors.
  • Arrives with a built-in reader as standard. If used with ‘IPassan’, our Cloud Access Control System, the built-in reader can be replaced with the IPassan Panel Mount Reader.
  • Arrives as standard with a flush box for flush mounting, but surface mounting is available with the Onyx Surface Housing.

Features

  • Vandal Resistant
  • 10″ Touchscreen
  • Built-In Facial Recognition (with Liveness Detection)
  • Supports Visitor Passes
  • Supports Proximity, PIN Code, QR Code & Facial Recognition Access
  • 2-Way Video Communication (with VOG7 & Max10 monitors)
  • Name Directory
  • Integrated Presence Sensor
  • Integrated Speaker & Microphone
  • 1 x Integrated Wide-Angle Camera with LED Lighting
  • 2 x Integrated Facial Recognition Cameras
  • Integrated Reader
  • Voice Announcements with Display Indicators for ‘Call in Progress’ and ‘Door Open’

Specification

Range Onyx
System IPerCom, IPerCloud
Connection IP
Communication Type Audio, Video
Panel Design All-In-One
Panel Type Digital, Touchscreen
ID Method Facial Recognition, PIN Code, Proximity (RFID), QR Code
Material Aluminium, Glass
Vandal Resistant Yes
IP Rating IP66
IK Rating IK08
Finish Brushed
Colour Black
Screen Size 10″
Display Type TFT
Integrated Camera Yes (2 x Facial Recognition, 1 x Video Intercom)
Camera Angle 113°
Integrated Reader Yes
DDA Compliant Yes
Dimensions (fascia) H393mm x W175mm x D12mm

Dimension

Urmet-Onyx-Touchscreen-Entry-Panel-fig1

Safety Instruction

  • Power Supply: Connect the entry panel exclusively to the specified Urmet power supply unit (PoE or dedicated system bus voltage as outlined in the wiring schematic). Using non-standard power supplies can damage internal electronics and void the warranty.
  • Environmental Protection: While the Onyx panel is rated for outdoor/entrance use (IP rating), ensure the sealing gaskets and cable grommets are correctly seated during installation to prevent water ingress.
  • Cleaning & Maintenance: Clean the glass touch surface only with a soft, slightly damp microfibre cloth. Do not use abrasive cleaners, solvents, alcohol, or high-pressure water jets directly on the touchscreen or camera lens.
  • Vandalism & Mechanics: Do not press the glass display with sharp or heavy metallic objects.

Troubleshooting

Issue Possible Cause Recommended Solution
Blank / Unresponsive Screen Power supply disconnected or PoE failure Check the power supply unit connection and verify voltage at the main terminal block.
No Audio During Call Speaker/mic gain set to minimum Access installer settings to adjust speaker output and microphone sensitivity levels.
Door Lock Doesn’t Release Wiring fault or incorrect lock relay connection Inspect the relay connection to the electric strike and verify power supply output to the lock.

Documents / Resources

PDF thumbnailOnyx Touchscreen Entry Panel
Instructions · Urmet, Onyx, Entry Panel, Touchscreen

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.