VEVOR Bed Rail Instruction Manual

VEVOR Bed Rail Instruction Manual

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructions manual carefully.

SAFETY INSTRUCTIONS

WARNING:
Read this material before using this product. Failure to do so can result in serious injury.

Use precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
   Please keep small spare parts out of children’s reach.
3. Use as intended only.
4. Inspect before every use; do not use if parts are loose or damaged.
5. Keep away from sharp points, blades and other items, so as not to scratch the product.
6. The product complies with relevant standards and regulations Installation of this device mus comply with all applicable regulations and t should only be operated in well-ventilated areas. Please read the user manual before installing and using this equipment.
7. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
   8. This appliance is intended to be used in household and similar applications such as:
   -staff kitchen areas in shops, offices and other working environments;
   -farm houses;
   -by clients in hotels, motels and other residential type environments;
   -bed and breakfast type environments.
8. Please properly keep product Check whether the product is abnormal before use. If it is abnormal please stop using it.
9. Please use the product according to the intended use, warn of potential injury from misuse.

Technical Parameters

Instructions for Use

APPLICATION OF BED SAFETY RAIL
This Bed Safety Rail is an assistive balance device. It is designedtoassist peoplewho are mobile, but require some assistance to get in and get out of bed, orreposition in bed safely. The bed rail is NOT intended for people withverypoormobility, or who are permanently bedridden. It is NOT designed toprevent peoplefrom falling out of bed.

CAUTIONS and WARNINGS

1. Please make sure that you read and follow these instructionscarefully. Failureto comply may result in injury.
2. Ensure all parts are assembled securely and all spring buttonsareproperlyengaged in position prior to use.
3. The area between an assistive bed rail and mattress creates apotential forserious, life-threatening entrapment. It is possible fora person’s head, neck,arm (s), leg (s) or body to become wedged between the side of the mattress and any of the bed rail.
4. The mattress must be tight against the assistive handrail, with no gaps at all times. This should be checked frequently-at least daily.
5. The mattress must be tight against the assistive handrail, with no gaps at all times. This should be checked frequently-at least daily.
6. NEVER use unless the product is tight against the mattress without gaps, and at least 12.5 in. from headboard and foot board.
7. NEVER use with children.
8. NEVER use on toddler, bunk, water, or inflatable beds, beds with soft compressible pads, articulated beds, or on beds with a mattress height taller than 13in (33cm)or shorter than 7 in (17.8cm). ONLY use with twins, queen and king size beds.
9. Theproduct is an auxiliary product.Patients without autonomous ability must be under supervision.

Part List

NO.	Part name	Pictorial view	Quantity
A	Folding frame		1
B	U-shaped flat tube		1
C	l-shaped tube		2
D	U-shaped armrest tube		2
E	Safety belt		1
F	Storage bag		1
G	C-shaped buckle		4
H	Grip nut		2

ASSEMBLY STEPS

STP1：
Take out the folding frame,unfold it 180° and assemble the upper andlowerpartstogether.

STP2：
Insert C-shaped buckles on both sides to fix.

STP3：
Align the supporting flat tubes on both sides at 90°, and then pressthemarbleson both sides to insert into the U-shaped flat tubes. After insertion, themarbleswillpop out to be firmly fixed.

STP4:
Turn the plastic screws on the side of the handrail to lock the U-shapedflat tube

STP5：
Take out the U-shaped handrail tube and insert it on both sides.

STP6：
Insert C-shaped buckles

STP7：
Install-shaped tube on both sides

STP8：
Finally, install the storage bag on the Produc

TIP:
With a fixed tape for the user to secure the fixation (You canchoosetouseit or not to use it.)

CLEANING THE BED SAFETY RAIL

Note:
Please check the suitability of the cleaning products beforeuse. Donotuseabrasive cleaners or cloths as these could permanently damage thesurfaceandinvalidate any warranty. 1. Clean regularly using soapy water or warm water. Then wipe it withdrytowel.2. Allow product to fully dry prior to use/storage.

Our After-Sales Service:

1. If you discover any product damage or missing parts, please contact ourcustomer service team for assistance.
2. Our dedicated customer service team is available to address anyquestionsorconcerns you may have regarding the product.
3. We strive to provide prompt and efficient support to ensure thesatisfactionofour customers.
4. For any inquiries, warranty claims or assistance, please contact our customerservice.

Usage Guidelines for Bed Rail:

1. Ensure that the bed rail is properly installed and securely attachedtothebedframe before use.
2. When adjusting the height or position of the bed rail, make sureit issecurelylocked in place before use.
3. Do not allow children to play or hang on the bed rail. It is intendedfor adultuseonly. 4.
4. Use caution when getting in or out of bed, ensuring that the bedrail isproperly positioned to provide support.

Manufacturer: MOBILITY SOURCE MEDICAL TECHNOLOGYCO., LTD.
Address: 160 HEHENG ROAD, YANGHE TOWN, GAOMINGDISTRICT, Foshan,Guangdong, 528513, CHINA.
E-mail: support@vevor.com