VEVOR WP-06 Traffic Posts Instruction Manual

VEVOR-logo.

VEVOR WP-06 Traffic Posts

VEVOR-WP-06-Traffic-Posts-product

Product Parameter

   

Model

 

Type

Total number of pieces Size of each piece(mm)
 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

WP-06

Post 3 1140*100
Base 3 430*430*35
 

2

Post 4 1140*100
Base 4 430*430*35
 

3

Post 5 1140*100
Base 5 430*430*35
 

4

Post 6 1140*100
Base 6 430*430*35
 

5

Post 9 1140*100
Base 9 430*430*35
 

6

Post 10 1140*100
Base 10 430*430*35
 

 

7

Post 12 1140*100
Base 6 430*430*35
Base 6 430*430*35
 

8

Post 2 1140*100
Base 2 430*430*35
   

Model

 

Type

Total number of pieces Size of each piece(mm)
 

9

 

 

 

 

 

 

 

WP-06-R4

Post 2 1140*100
Base 2 350*350*35
 

10

Post 3 1140*100
Base 3 350*350*35
 

11

Post 6 1140*100
Base 6 350*350*35
 

12

Post 9 1140*100
Base 9 350*350*35
 

13

Post 12 1140*100
Base 12 350*350*35

TRAFFIC POSTS

MODEL: WP-06, WP-06-R4

VEVOR-WP-06-Traffic-Posts-Fig- (1)

This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

  1. The product complies with relevant standards and regulations. Installation of this device must comply with all applicable regulations, and it should only be operated in well-ventilated areas. Please read the user manual before installing and using this equipment.
  2. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
  3. Children shall not play with the product.
  4. This product shall not be used by children. Keep the product out of reach of children.
  5. This product is intended to be used in household and similar applications such as:
    • staff kitchen areas in shops, offices and other working environments;
    • farmhouses;
    • by clients in hotels, motels and other residential type environments;
    • bed and breakfast type environments.
  6. Please properly keep product. Check whether the product is abnormal before use. If it is abnormal, please stop using it.
  7. Please use the product according to the intended use, warn of potential injury from misuse.

SAVE THESE INSTRUCTIONS

INSTRUCTIONS

  1. Take out the Traffic Posts from the box.
  2. Insert the base into the column and press tightly
  3. The product has been assembled and can be used according to actual needs

VEVOR-WP-06-Traffic-Posts-Fig- (2) VEVOR-WP-06-Traffic-Posts-Fig- (3)

Troubleshooting

  • Post is wobbling: Place the post on a flat, level surface and make sure the base is fully seated.
  • Post keeps tipping over: Check that the weighted base is correctly installed and positioned on a stable surface.
  • Post is loose in the base: Remove the post and reinstall it firmly into the base connection.
  • Reflective strip is loose: Check the strip attachment and press it firmly back into position if possible.
  • Reflective strip is damaged: Replace the damaged reflective material to maintain nighttime visibility.
  • Post is leaning: Remove it from the base and check for incorrect assembly or a damaged connection.
  • Base is unstable: Clean dirt, gravel, or debris from underneath the base and place it on a firm surface.
  • Post is difficult to assemble: Check that the post and base are aligned correctly; do not force the connection.
  • Post is damaged or cracked: Stop using the damaged post, especially in traffic-control areas, and replace it.
  • Base is damaged: Replace the base if it is cracked or no longer provides proper stability.
  • Post has become dirty: Clean with mild soap and water, then allow it to dry completely.
  • Post is difficult to see at night: Clean the reflective strip and make sure it is facing the traffic direction.
  • Multiple posts are not aligned: Measure the spacing and reposition each base on a level surface.
  • Post moves in strong wind: Reposition it on a firm surface and ensure the weighted base is properly installed. The wide base is designed to improve wind resistance.

Documents / Resources

PDF thumbnailWP-06 Traffic Posts
Instruction Manual · WP-06, WP-06-R4, WP-06 Traffic Posts, Traffic Posts, Posts

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.