User Manual
Where Imagination Meets Reality

Model: C1
Please read this manual carefully before using the projector.
Important Safety Considerations
Attentions:
Thank you for purchasing this series of video projectors.
Please read through this User’s manual for proper use of this product.
Friendly Reminder:
- Do not look directly into the lens while the projector is running, as strong light may damage your eyes.
- Do not block the air outlet to prevent the projector from cooling down because internal electronics are damaged.
- Keep the projector and accessories out of the reach of children.
- Please make sure that the working environment of the projector is dry and ventilated.
- To prevent electric shock, please keep the projector out of the rain and away from moisture, it is recommended to switch off the projector after it has run for 6 hours non-stop.
- Do not press hard on the projector, as it may damage the product.
- Do not throw, hit, or shake the projector to avoid damaging the circuit board.
- Any questions after receiving the projector, please contact us, we will quickly and correctly solve your problem within 24 hours and give you a satisfactory answer.
Package Contents

Projector Description

- Lens
- IR Receiver
(During operation, this area must remain ventilated; - Air Inlet otherwise, it may cause abnormal heat dissipation and affect the normal functioning of the machine.)
- Head phone Jack
- USB Port
- IR Receiver
- HD Port
- Power Jack
- Air Outlet (During operation, this area must remain ventilated,; otherwise, it may cause abnormal heat dissipation
- Focusing
- Speaker and affect the normal functioning of the machine.)
- Power Key
- Bottom Label & Dust Cover
(You can remove the Bottom Label & Dust Cover to clean up the dust.)
Please scan the QR code to view the video for detailed operations.
https://hompowtec.com/how-to-clean-the-dust-inside-the-c1-projector-lens-c1
Remote Control Function

Operation Instructions
Power On/Off
Focusing
You can rotate the focus ring left or right to adjust the projected image for clarity.

USB
https://hompowtec.com/using-usb-drive-c1
Step 1: Insert the external hard drive (USB).
Step 2: You can access different files under the “Movie,” “Music,” and “Photo” icons.
Note: Please check if the file type is supported by the device; otherwise, it cannot be accessed.
HDMI
https://hompowtec.com/connecting-streaming-stick-c1
https://hompowtec.com/connecting-to-computer-c1
https://hompowtec.com/screen-mirroring-with-an-iphone-c1
Press the “Source” button on the remote and select “HDMI” to access the HDMI input channel.
Alternatively, you can select the “HDMI” icon on the main page to access the HDMI input channel.
Tip:
Make sure to select the correct connection mode between your computer and the projector. It is recommended to choose “Duplicate” or “Extend.”
Bluetooth Connection
https://hompowtec.com/bluetooth-settings-c1
Step 2: Enter the “Settings” menu and select “BT Setting.”
Step 3: There are three Bluetooth options: “Off,” “Send,” and “Receive.
“The “Off” option means Bluetooth is turned off.

The “Receive” option turns the device into a Bluetooth speaker.
Tip:
Please set the volume of your external device to the maximum.
Specification
| Model | C1 | |
| Display Technology | LCD | |
| Light Source | LED | |
| Installation Type | Front / Rear / Ceiling | |
| Focus | Manual | |
| Power Input | DC 12V/2.5A | |
| Unit Dimension | 5.41’5.04’2.51 inch | |
| Unit Net Weigh | 0. 772 lb | |
| Mounting Screws | 1/4″(not included) | |
| Input Ports | HDMI 1.4*1. USB2.01 | |
| Output Ports | 3.5mm headphone | |
| Working Temperature | 0-35 C | |
| Photo Format | File Extension | jpg/.png/.bmp |
| Support | JEPG,PNG,BMP,MPO | |
| Audio Format | File Extension | avi/.ts/.dat/.vob/wavimkv/.mp3/.mp4f.m4a |
| Support | MPEG1,MPEG2. LPCM, M P3 | |
| Video Format | File Extension | dattts/. mp4/.mpgl.mpegtavitrnkv/.mov1. wmvi.asfl.f1w1.3gp./.3gpp.tpttrp |
| Support | MPEG1.MPEG2. H.263, H.264,AVS,VC1, MJPEG.RV30.RV40.HEVC | |
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
IC Caution:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device.
To maintain compliance with RSS-102 RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
TOP SERVICE:
Any questions about this item, please
1-888-981-6883
service@hompowtec.com
![]()
Documents / Resources
![]() | C1 Mini Projector |
References
- hompowtec.com/bluetooth-settings-c1hompowtec.com
- hompowtec.com/connecting-streaming-stick-c1hompowtec.com
- hompowtec.com/connecting-to-computer-c1hompowtec.com
- hompowtec.com/how-to-clean-the-dust-inside-the-c1-projector-lens-c1hompowtec.com
- hompowtec.com/screen-mirroring-with-an-iphone-c1hompowtec.com
- hompowtec.com/using-usb-drive-c1hompowtec.com
- User Manualmanual.tools
