Nsendato Audio Extender

Specifications
- High-concerned chemical None
-
Bundle Bundle 1
-
Shielding Non-Shielded
-
FeatureNone
-
Package No
-
Outer Diameter mini
-
Application Projector ,Amplifier Multimedia, Monitor, Computer, TV box, DVD Player, Television
-
Type Optical Fiber Cables
-
Connector B OPTICAL INTERFACE
Spdif Toslink Optical Digital Audio True Matrix 4×2 Switch 4 In 2 Out Switcher with Optical Cable Remote Control For PS4 HDTV
Specifications:
- Supporting audio format: for DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD
- Max baud rate: 16Mbps
- Output cable distance: up to 40m(Use the optical fiber cable loss less the 0.2Db/m )
- Max working current: 100mA
- Input:AC (50HZ, 60HZ) 100V-240V
- Output:DC5V/500mA
- Operating Temperature range: 0 to 40 degrees Celsius
- Operating Humidity range: 5 to 90%RH (No Condensation)
- Dimension: 68 * 128 * 34mm/ 2.68 * 5.04 * 1.34inch (L x W x H)
- Weight: 185g/ 0.41lb
Feature:
Four ways of optical fiber signal input split or switch to two sets of SPDIF signal receiving the device.
- Support signal retiming.
- Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m.
- The input control can through R/M and also can directly press the button.
- Support last time working state memory when power off Nsendato Audio Switch box
- Over-voltage protection can prevent the damage caused by connecting the unmatched power adapter to the machine if the light for standby indication flashed, it shows that the output voltage from the power adaptor is too high and the adaptor needs to be changed.
- LED status indication, it can tell us the working state of the device very easily.
Installs in minutes
Operating and Connecting:
- To use the optical fiber cable to connect the optical fiber signal source (such as blue-ray player, the computer and so on) with the matrix input
- To let the matrix output port connect to the optical fiber signal receiver (such as an amplifier, home theater and so on) by using the optical cable
- Connect the 5V power supply to the matrix DC input port
- Through the remote or button to switch the input source freely Switch only, other devices not included.
Note:
- Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
- Pls turn the power off when the machine is not used for long time.
- Pls do not open the cover and do not touch the inside parts.
- Pls use the original factory power adaptor.
- For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Package:
- 1 x Audio Switch Box 4X2
- 1 x Remote Control
- 1 x Power Adapter
Connect two Amplifer at the same time

Separate power supply
More high-power amplifiers and audio can be connected extemally, and the sound quality transmission has no attenuation 
The Switcher Supports LPCM2. O, DTS, and Dolby-AC3, Enjoy Various Auditory Feasts 
Two signal switching modes
Flexible operation and convenient use 
Long distance transmission
Using cables with line loss less than 0.2db/m, the transmission distance can reach 40m without signal loss
Documents / Resources
![]() | Audio Extender |
![]() | Audio Extender |
References
- User Manualmanual.tools
Published: July 10, 2026
Updated: July 13, 2026

