CREALITY K2 Pro 3D Printer User Manual

CREALITY-LOGO

CREALITY K2 Pro 3D Printer

CREALITY-K2-Pro-3D-Printer-PRODUCT

INTRODUCTION

Dear Users
Thank you for choosing Creality products. This quick guide introduces the steps for unboxing, installation, and debugging. Please read it carefully before use. For more detailed instructions, unboxing videos, and after-sales service tutorials, please visit the Creality Wiki platform. The Creality team is always ready to provide you with quality service. If you encounter any problems during use, please contact us through the phone number and email provided at the end of this quick guide.

Bought a product but don’t know how to use it? Don’t worry, all your confusions will be resolved!

  • https://wiki.creality.com
  • Comprehensive understanding of the new product, immersive exploration of its features.
  • Detailed operation guides to help you get
  • Professional after-sales support platform for client solutions.CREALITY-K2-Pro-3D-Printer-FIG-1
  • Creality Cloud – Your 3D Printing Universe Awaits!Discover the all-in-one 3D printing platform designed for all enthusiasts.
  • https://www.crealitycloud.com
  • Access a vast library of high-quality models.
  • Built-in cloud slicing and Print Settings make printing easier than ever.
  • Control remotely and print with just one click, anytime, anywhere.CREALITY-K2-Pro-3D-Printer-FIG-2

NOTES

  1. Do not use the printer in any way other than described herein in order to avoid personal injury or property damage;
  2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, cool, and dustless environment;
  3. Do not expose the printer to violent vibration or any other unstable environment, as this may cause poor print quality;
  4. Please use recommended accessories to avoid clogging of the extrusion head and causing damage to the machine;
  5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet, which accompanies the printer;
  6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal injury;
  7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable parts that could cause crushing and cutting injuries to bodily parts;
  8. Use the provided tools to clean the ament from the extruder in time, taking advantage of the residual temperature after printing. Do not touch the extruder directly when cleaning; otherwise, it may cause burns;
  9. Clean the printer frequently. Clean the printer body with a dry cloth regularly after powering off the printer, wipe away dust, bonded filament, and foreign objects on the guide rails;
  10. Children must be accompanied by an adult at all times when using or near the printer;
  11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located
    (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes; Creality will not be responsible for any violators’ legal liability under any circumstance;
  12. Tip: Do not plug in or unplug wires on a charged basis.

Hot parts! Burned ngers when handling the parts Wait one-half hour after switching off before handling parts

Printer Information

CREALITY-K2-Pro-3D-Printer-FIG-3

TOOL BOXCREALITY-K2-Pro-3D-Printer-FIG-4

About the PrinterCREALITY-K2-Pro-3D-Printer-FIG-5CREALITY-K2-Pro-3D-Printer-FIG-6

 Equipment Specifications

Parameters
Mode K2 Pro
Print size 300*300*300mm³
Pinter size 445*477*573mm³
Single set net weight 23.7kg
Support filaments PLA/ABS/PETG/PA-CF/PLA-CF/PET/ASA/PPA-CF
Extruder type Proximal dual gear extruder
Printing speed ≤600mm/s
Acceleration ≤20000mm/s²
Nozzle diameter 0.4mm (standard)
Nozzle temperature ≤300℃
Hotbed temperature ≤110℃
Rated Po er 1300W
Rated voltage 100-240V~, 50/60Hz
Screen 4-inch color touch screen
AI camera Yes
Power recovery Yes
Filament detection Yes
Flow detection Yes
Slicing software Creality Print 6.0 and higher
Working mode USBash drive /Ethernet/Wi-Fi
Printing platform PEI Spring steel platform plate
Leveling method Automatic leveling
Ambient temperature 5℃~35℃
   

 Equipment SizeCREALITY-K2-Pro-3D-Printer-FIG-7

 Unboxing

Remove the heated bed locking screwsCREALITY-K2-Pro-3D-Printer-FIG-8Use a hexagonal wrench to remove the four heated bed locking screws indicated by the yellow labels.

 Install Accessories

Install Printer ScreenCREALITY-K2-Pro-3D-Printer-FIG-9

  1. Peel off the ribbon cable sticker on the top inside of the machine, and pull the screen ribbon cable through the screen slot at the top of the machine.CREALITY-K2-Pro-3D-Printer-FIG-10
  2. Connect the screen ribbon cable: Make sure to press it into place according to the direction shown in the diagram.CREALITY-K2-Pro-3D-Printer-FIG-11
  3. Insert the screen into the machine: A. Align the screen latch with the screen slot on the machine. B. Gently push to the left to lock it in place.

When removing the screen, simultaneously press the clip position at the center of the bottom with your hand to easily take out the screen. Avoid removing it forcefully to prevent damaging the clips, which could cause the screen to fail locking securely.CREALITY-K2-Pro-3D-Printer-FIG-12

Install Spool Holder and PTFE TubeCREALITY-K2-Pro-3D-Printer-FIG-13

  1. As shown in the figure, align the material rack with the hole on the back of the machine and tighten it with two material rack screws.
  2. Connect the PTFE tube: As shown in the picture, connect both ends of the PTFE tube to the pneumatic fittings on the material rack and the machine.CREALITY-K2-Pro-3D-Printer-FIG-14

Tip: First, remove the screws from the spool holder position, then install the machine’s spool holder according to the installation steps.

 Connecting CFSCREALITY-K2-Pro-3D-Printer-FIG-15

Install the filament buffer

  • First, unscrew the two damper screws on the back panel, then install the damper on the back of the machine. Finally, re-tighten the two damper screws that were unscrewed. Pay attention to the direction of the damper, and do not install it in reverse.CREALITY-K2-Pro-3D-Printer-FIG-16

Connect the PTFE tube and 485 cable

  • The longer PTFE tube connects the CFS ve-way connector to the buffer. The shorter PTFE tube connects the CFS buffer to the printer.
  • The shorter 485 communication wire connects the CFS to the buffer. The longer 485 communication wire connects the CFS to the printer.

CREALITY-K2-Pro-3D-Printer-FIG-17

  1. Connect CFS hub outlet and buffer: insert one end of the longer PTFE tube into the CFS hub outlet (position a); insert the other end into the buffer (position b, any of the four holes).
  2. Connect the buffer to the printer following steps A, B, and C.CREALITY-K2-Pro-3D-Printer-FIG-18
  3. Connect CFS and buffer Creality 485 cable: Note that the elbow is inserted into the buffer position c, and the straight head is inserted into the CFS position d (either of the two 485 sockets of CFS).
  4. Connect the CFS to the printer using the 485 communication wire: This cable has 6-pin straight connectors on both ends with no specific orientation. Insert one end into position e on the CFS and the other end into position f on the machine interface.CREALITY-K2-Pro-3D-Printer-FIG-19

 Connecting Multiple CFSCREALITY-K2-Pro-3D-Printer-FIG-20

Power-on GuideCREALITY-K2-Pro-3D-Printer-FIG-21

Product Usage

 User InterfaceCREALITY-K2-Pro-3D-Printer-FIG-22

The left side is the navigation bar :

  1. Home: In idle state, you can view the temperature of each part of the machine; during printing, you can view the model printing progress and other information on this interface.
  2. Adjustment page: On this page, you can operate the machine to move, load filaments, etc.
  3. File page: On this page, you can choose to print les and operate printing.
  4. Function setting page: You can set network, camera and other functions. you can also view machine information.
  5. Help page: You can export logs or view the machine wiki.

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest softwarermware UI published on the official website.

 Loading Filament From Spool Holder

  1. If the aments support RFID recognition, align thechip on the aments with the RFID recognition position of the machine body to scan the laments, and the ament information can be automatically set.
  2. Hang the filament on the spool holder.
  3. Thread the laments into the Teflon tube and push gently until they cannot be pushed.CREALITY-K2-Pro-3D-Printer-FIG-23
  4. 4 If the filaments do not support RFID recognition, you need to manually click on the screen to set the filament information: Adjustment page → Filaments → Edit (asshown below the material rack), set the filament brand-type-name-color respectively, and nally click OK to save the settings.CREALITY-K2-Pro-3D-Printer-FIG-24
  5. 5 Extrude: Push the filament gently by hand, and click “Extrude” on the filament interface. The machine will automatically set the current filament temperature and will automatically extrude the filament after the heating is complete.CREALITY-K2-Pro-3D-Printer-FIG-25
  6. Retract: A. Click Retract on the filament management page, and the extruder will automatically move to the left front to cut off the filament for retraction. B. Wait for the retraction to end, and extract the filament from the Teflon tube behind the machine.CREALITY-K2-Pro-3D-Printer-FIG-26
    1. During extruding, you can observe whether there is filament flowing out of the nozzle. If no flow-out is observed, you can gently push the filament toward the extruder at the Teflon tube behind the machine, and then click “Extrude” again.
    2. The current interface is for reference only. Please refer to the latest softwarermware UI on the official website for updates.

 Loading Filament From CFS

Users who have not purchased CFS can skip this step.To avoid the filament spool getting stuck, do not use a cardboard spool with untreated edges or a cardboard spool that are deformed as a whole;

  • is the Refresh RFID button, which can be used to read ament. If the reading is successful, the remaining filament and filament color will be displayed. If the reading fails, th filament editing button will be displayed, and the filament will be
    displayed as “?”.
  • b is the empty slot state, displayed as “/”, and editing is not supported.
  • means that the RFID filament is read, the eye icon is for viewing filament information. RFID filament only supports viewing; if this is RFID and you want to use non-RFID next time, click the pre-loading button, wait for the reading to complete, and then click the filament editing button.
  • d is ordinary filament, which supports editing.
  • is the state where RFID is not read, the filament displays “?”. At this time, you need to click the edit button to manually edit the filament information.
  • is the CFS humidity status. Green means the humidity is appropriate, orange means the humidity is slightly higher, and red means the humidity is very high. The desiccant may need to be replaced.CREALITY-K2-Pro-3D-Printer-FIG-27

1 Introduction to the filament management interface: The 昀椀lament management page is divided into two parts: the spool holder [left] and the CFS [right]. The code above filament in the CFS, such as 1A, indicates the slot number.CREALITY-K2-Pro-3D-Printer-FIG-28

  • Loading filament: Put the filament into the CFS, align the filament head with the Teflon tube of the corresponding silo, push it in gently, and let go after feeling the pulling force. The
    lament will be automatically loaded.
  • Unloading lament: First, make sure that the lament is not in the extruder, in this case, just pick up the lament and pull it out; if it is in the extruder, click the Retract button first, wait for the filament to return to the CFS, and then take out the filament.

 First Use

Filament SetupCREALITY-K2-Pro-3D-Printer-FIG-29

  1. Put in filament and wait for tightening (RFID filament does not need to be edited; in case of non-RFID filament, “?” will be displayed after reading, and the filament needs to be edited manually).
    • Users who have not purchased CFS can skip this step.
    • The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/rmware UI published on the official website.
  2. Check whether the content information displayed on the screen corresponds to the content in CFS.

Print

  1. Click the le on the screen, confirm the ament mapping status, and click Print;CREALITY-K2-Pro-3D-Printer-FIG-31
    • The area is the color and type of the material contained in the print. For example, the green background PLA in the figure indicates that green PLA is required.
    • The area is the state after the mapping of the print to the filament bin is completed. For example, there is no green PLA in the filament bin, and the blue PLA is automatically selected.
    • When the mapping fails, ‘–‘ will be displayed, and the user needs to manually select the material.
    • Enabling CFS means printing with CFS filament; otherwise, the material rackament will be used for printing, and the multi-color e will be regarded as a single-color
    • Checking print calibration will perform automatic leveling, AI calibration, and other functions.
  2. Printing…CREALITY-K2-Pro-3D-Printer-FIG-32

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/rmware UI published on the official website.

 Creality Print Slicing

Software Download and Installation

Log in to the Creality Cloud website to download the latest Creality Print slicing software: https://www.crealitycloud.com/software-昀椀rmware/software/creality-print ;

 Bind Machine to LAN

  1. Check the machine IP on the machine screen: Settings → Network.
  2. Enter the machine IP in the slicing software for binding: Manually add Enter IP.CREALITY-K2-Pro-3D-Printer-FIG-33

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software UI published on the official website.

 Slice and Send to Print.

  1. Click “Slice Plate”, and after slicing is complete, click “Send Print”.CREALITY-K2-Pro-3D-Printer-FIG-34
  2. Check the machine and laminate information, then click “Start Print”.CREALITY-K2-Pro-3D-Printer-FIG-35
    • For more detailed slicing software usage tutorials, please log in to the Creality 3D official Wiki: https://wiki.creality.com/en/software/update-released
    • The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/rmware UI published on the official website.
    • Precautions for Printing TPU Filament:
      1. Only support printing TPU filaments with an external spool holder on this machine, requiring a hardness of TPU95 or higher.
      2. Remove the top cover during printing, and insert the filament directly into the extruder from above.

Tips and Routine Maintenance

 Printing Precautions
When the operating voltage is 110V and the ambient temperature is below 15°C, the chamber heating function of the product may take a longer time to reach the target temperature. To ensure that materials like ABS can be printed properly, it is recommended to add appropriate insulation measures to the exterior of the machine.

Lubrication and maintenanceCREALITY-K2-Pro-3D-Printer-FIG-36

300-hour Routine Maintenance: Please lubricate the indicated area regularly with grease. Apply grease only to the central section and then distribute it evenly through movement. (Users can purchase grease on their own to maintain the machine.)

Using and Maintaining a Spring Steel Platform

CREALITY-K2-Pro-3D-Printer-FIG-37

  1. After the printed model has cooled, remove it along with the spring steel platform from the device. Gently bend the platform slightly to separate the model from it. (Be careful not to over-bend the platform, as this could cause permanent deformation that renders it unusable.)
  2. Residual material on the platform can be scraped off with a putty knife. Exercise caution to ensure safety while doing this.
  3. If the model’s first layer does not adhere properly, it is recommended to apply solid glue evenly on the surface of the platform. After printing, the residual solid glue can be rinsed off with water.

Friendly Reminder: When the device has been printing for more than 300 hours or after replacing the printing platform or nozzle, the distance between the platform and the nozzle may change, which could result in poor adhesion of the first layer and lead to print failure. Please perform platform calibration regularly. Friendly Reminder: The printing platform is a consumable part; regular replacement is recommended to ensure proper adhesion of the first layer model.

Maintenance Items

Maintenance  instructions
Machine cleanup Clean the debris inside the machine to ensure that its operation is not affected. Before each print
Hot end Check if the wire output is normal; if not, please check if the extruder is blocked. After each change of 昀椀laments
 

Printing platform

 

Check the surface of the platform for residual filaments and glue; if so, clean the surface of the platform.

 

Before each print

Motion mechanism XYZ axis and lead screw lubrication. Cumulative print time per 300 hours
Air 昀椀ltration Replace the air filter. Cumulative print time per 300 hours
 

Equipment self-test

Optimization of vibration veins.  

Cumulative print time per 300 hours

Auto Leveling.
  Replacement of 昀椀laments of the same kind: follow the normal Retreat – Feed process.  
 

Filament replacement

Replacement of different filaments: Preheat the nozzle to reach the target temperature of the current filament; then retreat it, replace with the target filament, and preheat the nozzle to the higher lament extrude temperature of the two filaments; feed for 30s until the lament has been completely extruded, and 昀nally set the nozzle temperature to the temperature of the current lament nozzle.  

/

If the above issues cannot be resolved:

  1. Please scan the K2 Pro Wiki QR code to view more detailed after-sales service tutorials (you can also check the product unboxing steps, video guides, user instructions, and CFS device installation, etc.).
  2. Or contact our after-sales service center at +86 755 3396 5666, or send e-mail to cs@creality.com.CREALITY-K2-Pro-3D-Printer-FIG-39

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 20cm the Due to the differences between different machine models, the actual objects and the images can differ. Please refer to the actual machine. The nal explanation rights shall be reserved by Shenzhen Creality 3D Technology Co., Ltd.Radiator your body: Use only the supplied antenna.

MORE INFORMATION

SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD. 18th Floor, JinXiuHongDu Building, Meilong Road, Xinniu Community, Minzhi Street, Longhua District, Shenzhen City, China. Official

CREALITY-K2-Pro-3D-Printer-FIG-39

Documents / Resources

PDF thumbnailK2 Pro 3D Printer
User Manual · K2 Pro, K2 Pro 3D Printer, 3D Printer, Printer
PDF thumbnailK2 Pro 3D Printer
User Manual · K2 Pro, K2 Pro-SM-001, K2 Pro 3D Printer, 3D Printer, Printer

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.