AOC RC6 Smart Android Projector Instruction Manual

AOC-LOGO

AOC RC6 Smart Android Projector

AOC-RC6-Smart-Android-Projector-PRODUCTAttention

  1. Before you use the machine, please read this manual carefully.
  2. Please use the type of power supply indicated on the machine and the power supply supplied with it for power supply.
  3. Use the power cord carefully and avoid excessive bending; damage to the power cord may result in electric shock and fire.
  4. Please avoid foreign objects entering or obstructing the fan outlet to avoid affecting the fan’s operation.
  5. Do not disassemble the machine by yourself, otherwise the company will not undertake free warranty service.
  6. Do not look directly at the machine lens while the machine is working, so as not to burn your eyes.
  7. Keep a minimum clearance of 30cm around the machine, do not cover with newspaper, cloth, and other items.
  8. Please keep the machine away from humidity, sun exposure, high temperature, and other environments, away from objects with magnetic force.
  9. Suitable for safe use at altitudes of 2000 meters and below, in non-tropical climates.

Warning:

  • Operation of this equipment in a domestic environment may cause radio interference.

Note:

  •  Due to different models and versions, there are certain differences in appearance and functions. Please refer to the actual product.

Packaging Content

After opening the box, please first check if the contents of the packaging are complete. If there are any missing items, please contact the dealer for replacement.

AOC-RC6-Smart-Android-Projector- (1)

Installation Diagram

The following safety instructions ensure that this function maintains a long service life and prevents fire or electric shock. Please read them carefully and pay attention to all the following warnings.

  • Do not install into places with poor ventilation
  • Do not install into places are hot and humid AOC-RC6-Smart-Android-Projector- (2)
  • Do not install in smoky and dusty environment
  • Do not plugged the vent (Intake and exhaust)

AOC-RC6-Smart-Android-Projector- (3)

  • Do not install nearby temperature sensor or smog sensor. It may cause the sensor failed
  • Do not install somewhere directly blown by the warm/cold wind of the A/C, or it may cause the breakdown because of the water vapor condensation

AOC-RC6-Smart-Android-Projector- (4)

Pay attention to heat dissipation

In order to maintain the performance and reliability of the projector, please leave a space of at least 30 cm between the projector and surrounding objects.

AOC-RC6-Smart-Android-Projector- (12)

Pay attention to eyes
The brightness of the projector is very high, please do not look directly or avoid irradiating people’s eyes with the projector to avoid damage to eyesight.

AOC-RC6-Smart-Android-Projector- (5)

 Start Using

In order to achieve a better viewing effect, we recommend that you choose the following installation methods to install the projector.

AOC-RC6-Smart-Android-Projector- (6)Focus Adjustment
When the image is blurry, it is recommended to use the F+/F – keys to fine tune the lens focal length to achieve the best clarity effect.

AOC-RC6-Smart-Android-Projector- (7)

Parts Info

AOC-RC6-Smart-Android-Projector- (8)

External Equipment

AOC-RC6-Smart-Android-Projector- (9)

Remote Control

AOC-RC6-Smart-Android-Projector- (10)

Projection

AOC-RC6-Smart-Android-Projector- (11)

Indicator light status at the switch on/off position:

  • Standby: Red light
  • Power on: Blue light

Safety Instructions

  • Please pay attention to important information related to the operation and maintenance of the projector. You should read this information carefully to avoid problems. Following safety instructions will increase the life of projector.
  • Please consult the qualified personnel for installation and repair services, and do not use damaged wires, accessories and other peripherals.
  • Projector should be kept away from flammable, explosive. strong electromagnetic interference (large radar stations, power stations, substations) ,etc. Strong ambient light (avoid direct sunlight), etc.
  • Do not cover projector vents.
  • Please use the original power adapter.
  • Keep adequate ventilation and make sure vents are not covered to avoid projector overheating
  • When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain.
  • Do not bend or drag the power cord.
  • Do not put power cord under projector or any heavy objects.
  • Do not cover other soft materials on power cord.
  • Do not heat the power cord.
  • Avoid touching power adaptor with wet hands.

Disclaimer
This manual is general instructions, The pictures and functions in this manual should subject to the actual product. Our company is devoting to improve product performance, we reserve the right to modify product functions and interface described in this manual without notice. Please keep your device properly. We are not responsible for any loss caused by wrong operation of software/hardware or repairing or any other reasons. We are not responsible for any loss of any third party claims. This manual has been carefully checked by professional

Attention:

  • Do not look directly into the lens  while the projector is operating,  as the intense light may cause eye damage.
  • Children must use the projector only under adult supervision.

Documents / Resources

PDF thumbnailRC6 Smart Android Projector
Instruction Manual · RC6 Smart Android Projector, RC6, Smart Android Projector, Android Projector, Projector

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Je n’arrive à avoir aucune application et n’arrive également pas à connecter mon iPhone

    🇫🇷 nicolas carour asks Je n’arrive à avoir aucune application et n’arrive également pas à connecter mon iPhone
    Manuals+ clarified question
    Question

    How do I connect my iPhone to the AOC RC6 projector and access applications?

    Answer

    Based on the AOC RC6 Smart Android Projector manual, here is guidance for your issues:

    • Connecting an iPhone: While the basic manual does not detail the specific software menu for screen mirroring, smart Android projectors typically use an app like AirScreen or Eshare. Ensure both your iPhone and the projector are connected to the same Wi-Fi network. Look for a "Mirroring" or "iOS Cast" application on the projector's home screen, open it, and then use the Screen Mirroring feature in your iPhone's Control Center.
    • Accessing Applications: Ensure the projector is connected to the internet via Wi-Fi. Use the Home key (house icon) on your remote to return to the main interface. If you cannot find apps, check the "App Store" or "Google Play Store" (depending on the specific firmware version) to download or update them.
    • Remote Control Tips: Use the Mouse button on the remote (page 20) to navigate apps that may not be fully optimized for standard directional buttons.

    Note: The provided manual is a hardware setup guide and does not contain detailed software navigation steps. If applications are missing from the home screen, you may need to sign in to a Google account or check the network settings.

    En français : Assurez-vous que votre iPhone et le projecteur sont sur le même réseau Wi-Fi. Recherchez une application nommée "Mirroring" ou "Airplay" sur l'écran d'accueil du projecteur pour connecter votre iPhone. Pour les applications, vérifiez votre connexion Internet et utilisez la touche Home de la télécommande pour accéder au menu principal.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.