

Basic DIN Rail
Quick Guide V1.0 Instrukcja Obsługi
Model: BASIC-1GSP
Matter Over WiFi Smart Switch
BASIC-1GSP Smart Relay
https://help.sonoff.tech/docs/BASIC-1GSP
Scan the QR code or visit the website to learn about the detailed user manual and help.
Power off

WARNING
- Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!
- For single-phase use only (100-240V~).
Connecting to multiple phases may result in damage to the device. - To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection(RCBO) with an electrical rating of 32A has been installed before the BASIC-1GSP.
Install the device in the distribution board

Wiring instruction
Diameter of wiring (recommend): 11AWG to 6AWG (4mm² to 10 mm²)
- Do not reverse the N and L port connections to avoid damaging the device and creating a hazard.
- Make sure all wires are connected correctly.
Power on

After powering on, the device will enter the Pairing Mode during the first use. The LED indicator changes in a cycle of two short and one long flash and release.
The device will exit the Pairing Mode if not paired within 10mins. If you want to enter this mode, please long press button for about 5s until the LED indicator changes in a cycle of two short and one long flash and release.
Matter User Guide
Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.
eWeLink User Guide
http://app.coolkit.cc/dl.html
- Download the eWeLink App
- Add Device

Open the eWeLink App and scan the QR code on the quick guide or the device, and follow the App instructions.
If the page doesn’t display after scanning the code, please click the ‘+’ button in the top right corner of the eWeLink App homepage and select ‘Add Device’ to proceed.
FCC compliance statement
Responsible Party Name: SONOFF TECHNOLOGY LLC
Address: 14777 NE 40th St, Suite 201 Bellevue, WA 98007
Email Address: usres@itead.cc
FCC ID: 2APN5-BASIC1GSP
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. - Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type BASIC-1GSP is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/
For CE frequency
EU Operating Frequency Range
Wi-Fi: 802.11 b/g/n20 2412-2472 MHz
BLE: 2402-2480 MHz
EU Output Power
Wi-Fi 2.4G≤20dBm
BLE≤10dBm
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Pollution degree: II
Rated impulse voltage: 4KV
Automatic action: 10000 Cycles
Control Type: 1.B
Operating temperature: 15T50
Operating altitude: 2000M
Product dimension: 84×66.5x18mm
Rating: 100-240V-50/60Hz 32A Max
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen,
Guangdong, 518000, China
Website: sonoff.tech
Service email: support@itead.cc
MADE IN CHINA
![]()
Documents / Resources
![]() | BASIC-1GSP Smart Relay |
References
- User Manualmanual.tools

Jakie mierzone wartości SONOFF BASIC-1GSP udostępnia do wykorzystania w inteligętnych scenach tak jak SONOFF POWR udostępnia mierzoną moc?
What measured values does the SONOFF BASIC-1GSP provide for use in smart scenes compared to the SONOFF POWR?
The SONOFF BASIC-1GSP is a smart metering switch that provides several measured values for use in smart scenes, similar to the SONOFF POWR series. According to the product documentation, it supports the following for smart scenarios:
Note on Platform Compatibility: While these features are fully available in the eWeLink app, power consumption statistics are currently only supported on third-party Matter platforms via SmartThings and Home Assistant. Other Matter platforms like Apple Home, Google Home, and Alexa currently only support remote switching and voice control for this specific model.
Read the full Q&A page