ANSTEN EMK102B Fiber Optic Splitter user manual

ANSTEN EMK102B Fiber Optic Splitter

Specifications

• Product Name: Fiber Optic Splitter
• Model: 1*2, 1*4, 1*8, 1*16, 1*32 SC/LC/FC/ST/APC-UPC
• Batch/Serial Number: 0126–splitter
• Manufacturer: Shenzhen tianyuan commercial technology co., ltd
• EU Authorized Representative: EAST SEVEN

Usage Instructions

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

1. Step 1: Identify the Input Port
   Locate the Input Port of the splitter (usually marked as IN).
2. Step 2: Connect the Input Fiber
   Connect the incoming optical fiber from the OLT or optical source to the input port.
3. Step 3: Connect Output Fibers
   Connect the output ports to the optical fibers leading to the users or distribution points.
4. Step 4: Secure the Splitter
   Install the splitter inside:
   • Fiber Distribution Box (FDB)
   • Optical Distribution Frame (ODF)
   • FTTH terminal box

Ensure cables are properly managed.

About this item

• Digital Audio Splitter: Toslink fiber optic audio splitter allows you to connect one optical audio source and split it into two receiving devices, such as a A/V receiver and a soundbar
• Optical Splitter 1 Male In to 2 Female Out: Supports one male input to two female outputs. Please note that the optical audio splitter 2 female inputs can’t work together at the same time
• Toslink Optical Splitter: Perfect for linking your CD player, DVD player, soundbars, receivers, preamps, or any other digital audio source to both your home theater system and recorder, this solution eliminates the need for frequent plugging and unplugging of fiber optic cables, thus reducing wear and tear
• Fiber Optic Splitter: Featuring a 24k Gold interface, low-loss fiber optic technology, and low-jitter synthetic fiber combined with a metal interface, this product ensures an outstanding sound quality experience. Before making a purchase, please check whether the TV interface is compatible with the optic square interface
• Package include: Fiber Optic Splitter x1
• 1 Male Input to 2 Female Output
  • Support 2 Output devices that work at the same time.

• Optical Splitter 1 in 2 Out Fiber Optic Audio Splitter[1 Male Input 2 Female Output] 1×2 Toslink Optical Adapter
• TOSLINK OPTICAL SPLITTER 1 IN 2 OUT: EMK Toslink fiber optic audio splitter allows you to connect one optical audio source and split one into two receiving devices, such as soundbar/preamps and a audio processors. Duplicating audio simultaneously with any loss. Note: Not support extend!
• WIDE APPLICATION: 2 way toslink optical splitter offers solutions for any audio component, like soundbars/receivers/preamps, audio processors, DACs. Perfect for uncompressed PCM audio, compressed 5.1 to 7.1 surround sound systems including Dolby Digital Plus, DTS-HD High Resolution, ADAT’s and LPCM.
• 24k gold plated, Resist corrosion, reduce tarnish, and provide maximum protection for the fiber tip. Full metal connectors and buffer tubing for optimal signal transfer.
• Audio input device:
• TV, PS4, PS3, Xbox 360, Xbox One X/S, TV box, CD/DVD/Blu-Ray Player.
• Audio output device:
• Soundbar, Amplifier, Speaker, Audio Processor, DAC.

Easy Operation:

• It is very easy and simple to use, just plug and play without other devices, very convenient!

PACKAGE CONTENTS:

• 1*EMK Toslink Splitter

Important Safety Information

• Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to water or moisture.
• Handle with care to avoid cuts or injuries.

How to Use

• Connect the input fiber from the transmitter or main line to the splitter input
• Connect output fibers to receivers, ONTs, or downstream devices
• Confirm correct split ratio and signal distribution
• Use in passive network segments where amplification is not required
• Monitor signal levels periodically to ensure optimal performance

Safety Tips:

• Never look directly into the fiber optic port with the eye or through optical instruments
• Handle fibers carefully to prevent injury from sharp fiber ends
• Do not pull or twist fiber cables excessively
• Keep splitter and fiber cables away from heat sources
• Ensure proper grounding in installations if required by network standards
• Follow local regulations for fiber optic network installation
• Use proper PPE when working with fiber optic splicing or cleaving

Troubleshooting