ZELOTES F-33 Wireless Programmable Mouse Instruction Manual

ZELOTES F-33 Wireless Programmable Mouse

ZELOTES is a trademark of Master Electronic Technology Co., Ltd. All other trademarks are properties of their respective owners.

Package Contents

• Mouse x1
• Receiver x1
• Instructions x1
• Charging cable x1

Compatibility

With Receiver

• Windows ® 11 or later / Windows ® 10/Windows ® 8,Windows ® 7
• macOS 10.10 or later
• Chrome OS TM
• Linux Kernel 2.6

Bluetooth ® low energy technology

• Windows ® 11 or later / Windows ® 10/Windows ® 8
• macOS 10.10 or later
• Chrome OS TM, Android TM 5.0 or later

Product Structure Diagram

Notes on the functions of components

1. Left button
2. Right button
3. )Scroll wheel
4. Forward button
5. Back button
6. Adjust DPI mode
7. Switch light mode
8. Bluetooth
9. 02.4GHz indicator
10. 10 Receiver
11. Power on/off
12. Bluetooth “l ” indicator
13. UBIuetooth “2” indicator
14. Batte1Y status indicator
15. UTrackba11

Specifications

• Number of Buttons: 8
• Tracking System: Optical
• Frequency: 2402.85MHz-2480.85MHz
• Effective Distance: >10m
• Operating Voltage/Current: 3.7 V 15 mA
• Button Durability: 3 million times
• Wheel Durability: 1.2 million times
• Product Dimensions: 0°132*102*29mm，18°132*100*62mm Product Weight:260 ± 5 g
• DPI: 800-1200-1600-2400-4800 DPI
• 2.4 GHz Report Rate: 125 -500Hz
• Bluetooth Report Rate: 90-133Hz

【Bluetooth Mode】

Pair Your First Device

1. Turn on the power switch.
2. Press and hold the Bluetooth button for 3 seconds or more. The blue light flashes rapidly, and the mouse will enter Discoverable mode for 2 minutes.
3. Complete Bluetooth pairing on your device:
   Windows 7 and 8:
   • Click Start, then select Control Panel > Add Devices.
   • Select BT 3.0 Mouse or BT 5.0 Mouse in the list, then click Next.

Windows 10:

1. Click Start, then select Settings > Device > Bluetooth.
2. Select BT 3.0 Mouse or BT 5.0 Mouse in the list, then click Pair.

Pair Your Second Device

1. Short-press the Bluetooth button to switch channels.
2. Follow Steps 2 and 3 in “Pair Your First Device” to complete pairing.
3. Switch between devices. Short press the Bluetooth button to switch between up to 3 paired devices (Up to 2 devices via Bluetooth and 1 device via the 2.4 GHz receiver).

Charging Prompt:

• The battery status indicator is always on during charging, and off when the battery is fully charged. Low Battery Prompt:
• When you use the mouse, the 2.4GHz indicator or the Bluetooth indicator will flash quickly once every other second.

DPI Prompt:
When ⑥ is pressed, the 2.4GHz indicator or the Bluetooth indicator will flash to indicate DPI levels, once for DPI level 1, twice for DPI level 2, and so forth.

What If the Mouse Does Not Respond?

1. Please charge the mouse with the USB cable.
2. Please try to replace the receiver with a USB interface.
3. Make sure the power switch on the bottom of the mouse is “on” or in the correct position.
4. Try to restart the computer.
5. If it is still unsuccessful, please email E-mail: it@zelotes.cn for technical assistance.

Trademark number： No.013426986
The device conforms to Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. The device may not cause harmful interference, and
2. The device must accept any interference received, including interference that may cause undesired operation.

Precautions

• Do not expose it to liquid
• Do not disassemble it
• Avoid dropping it
• Avoid extremely high or low temperatures

Declaration of Conformity
The product conforms to EC standards for radio interference. Here, Master Electronic Technology Co., Ltd. in Shenzhen announces that F-33 radio equipment conforms to the Directive 2014/53/EU. The full text of the EU Declaration of Compliance can be found on:

• http://www.zelotes.cn/en/InfoPages_106.html
• Maximum Output Power: OdBm.
• Frequency Range: 2.4g band (2402.85MHz-2480.85MHz)

FCC Statement

1. This device complies with the operation. with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   1. The device may not cause harmful interference.
   2. The device must accept any interference received, including that which may cause undesired operation.
2. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and the receiver.
• Plug the equipment into a socket on a circuit different from that to which the receiver is connected.
• Consult your distributor or an experienced radio/TV technician for help.

Model: F-33 or FCC ID: 2AIRKF-35

The symbol means the product should not be disposed of with household waste but should be brought to an appropriate collection point to enable recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

Customer Service
Limited warranty for 18 months Lifelong technical support

Trackball Maintenance

1. The adjustable hinge enables you to choose a 0° or 18° angle.
2. The trackball can be removed and cleaned to move more smoothly.

Step 1
Through the round hole on the bottom of the mouse, eject the trackball from its socket.

Step 2
Take out the trackball, and wipe its socket with a cotton swab cautiously.

Step 3
Put the trackball back into the mouse.

(Note: Illustrations referenced in this manual are for function description purposes only. Please refer to the actual product when purchasing!) For more information on the functions, please go to the official website and download the drivers for programming: http://www.zelotes.cn)

Contact Information

• Manufacturer: Shenzhen Master Electronic Technology Co., Ltd. Address:303J, 3/F, B Building, Times Plaza, Center City of Longcheng Street, Longgang District, Shenzhen City, Guangdong Province, P.R. China Postcode:518000
• http://www.zelotes.cn
• E-mail: it@zelotes.cn