Generic AC85 Ceiling Lamp Instruction Manual

Generic-logo

Generic AC85 Ceiling Lamp

Generic-AC85-Ceiling-Lamp-product

Installation Instructions

  • Product: Wall Lmap
  • Watts: 3W
  • Voltage: AC85-265V 50-60Hz

Notice

  1. Suitable for a no-plug model.
  2. Please check the product if it was broken during transport before using.
  3. Be sure to leave the input wires in the installation location. Without an electric box.
  4. Connect the input of the power supply to the electrical supply. Generally speaking, the brown line is the “L” live wire, and the blue line is the “N” neutral wire.

Package Contents

  • Wall Lamp
  • 2 Screws
  • 2 Wall Plugs

Product Assembly

Generic-AC85-Ceiling-Lamp-1

Product Specifications

Product Wall Lamp
Watts 3W
Voltage AC85-265V 50-60Hz

Installation Steps

  1. Attach the bracket to the wall using screws labeled A and B.
  2. Ensure the power is turned off before proceeding.
  3. Secure the bracket with screws A and B as shown in the diagram.
  4. Connect the wires: L (brown) to L and N (blue) to N.
  5. Place the lamp onto the bracket and secure it with screw A.
  6. Ensure the lamp is properly secured and aligned.
  7. Turn the power on to test the installation.

Documents / Resources

PDF thumbnailAC85 Ceiling Lamp
Instruction Manual · AC85 Ceiling Lamp, AC85, Ceiling Lamp, Lamp

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.