slome Tipi Bed Instruction Manual

slome Tipi Bed - 1

Lit tipi Plume.

Tipi bed

READ CAREFULLY
IMPORTANT : RETAIN FOR FUTURE REFERENCE.
THIS PRODUCT COMPLIES WITH BS
8509:2008+A1:2011
+4 YEARS

Slome
HELIOS WEB SAS
contact@helios-web.fr

slome Tipi Bed - 2 slome Tipi Bed - 3(1) x2
slome Tipi Bed - 4(2) x2 slome Tipi Bed - 5(3) x2 slome Tipi Bed - 6(4) x2
slome Tipi Bed - 7(5) x1 slome Tipi Bed - 8(6) x1 slome Tipi Bed - 9(7) x1
Visserie

slome Tipi Bed - 10

Screws kits

    slome Tipi Bed - 116x70MM
(A) x6
slome Tipi Bed - 12 (B) x6 slome Tipi Bed - 13 (C) x10 slome Tipi Bed - 14Ø6x100MM
(D) x4
slome Tipi Bed - 15Ø4x30MM
(E) x30
slome Tipi Bed - 16(F) x1 slome Tipi Bed - 17(G) x2 slome Tipi Bed - 18(H) x8

 slome Tipi Bed - 19 slome Tipi Bed - 20

slome Tipi Bed - 21*Not included

1

slome Tipi Bed - 22

slome Tipi Bed - 23

slome Tipi Bed - 13 (C) x10

2 x2

slome Tipi Bed - 24

slome Tipi Bed - 25    slome Tipi Bed - 14 (D) x4

3slome Tipi Bed - 26

slome Tipi Bed - 25    slome Tipi Bed - 27    slome Tipi Bed - 11(A) x6    slome Tipi Bed - 12(B) x6

4

slome Tipi Bed - 28

slome Tipi Bed - 30    slome Tipi Bed - 15 (E) x30

5

slome Tipi Bed - 29

slome Tipi Bed - 17(G) x2    slome Tipi Bed - 18(H) x8

Warning & Safety instructions
General

The bed conforms to standards BS 8509:2008-A1:2011.
The size of the mattress to be used: 90 x 190 cm.
The bed is designed to be dismantled for storage or transportation.
An assembly drawing, list and description of all parts and tools required for assembly, and a diagram of the bolts and other fastenings provided in assembly instructions.
A screwdriver is required for assembly (not provided).
Assembly of this product should be done by an adult and children must be kept away from the product due to a possible risk of injury.
All assembly fittings should always be tightened properly and checked periodically.
Cleaning and maintenance recommendations: Clean with a clean and damp rag.
Children are likely to play, bounce, jump and climb on beds. Therefore, the child’s bed should not be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be placed either tight to any wall or have a gap of 300 mm between the wall and the side of the bed. It is recommended that any additional or replacement parts are obtained from the manufacturer or distributor.
The age range of the child for whom the crib is not recommended: under 4 years old.
Install and space the slats 60-75mm apart.

Warning

Do not place this child’s bed near heat sources, windows and other furniture. Do not use this child’s bed if any part is broken, torn or missing.

For all questions and advice concerning this product, please contact:

HELIOS WEB SAS
118 ROUTE D’ESPAGNE LE PHENIX BAT A
31100 TOULOUSE FRANCE

slome logo

HELIOS WEB SAS
118 ROUTE D’ESPAGNE LE PHENIX BAT A
31100 TOULOUSE FRANCE
contact@helios-web.fr

Recycle Icon 29PLEASE RECYCLE         Recycle Icon 17

Documents / Resources

PDF thumbnailTipi Bed
Instruction Manual · Tipi Bed, Bed

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.