HP S100PLUS Wireless Mouse User Manual

HP S100PLUS Wireless Mouse

Product Specifications

• Model: S1000 PLUS
• Weight: 80G
• Acceleration: 10G
• Scanning Frequency: 6000fps
• Movement Speed: 60 in/s
• Compatibility: Windows 7/8/10, ISO 10.0+

Mouse Installation & Usage

1. Remove the wireless mouse from its packaging.
2. Open the battery cover at the bottom of the mouse and take out the USB receiver.
3. Insert the USB receiver into an available USB port on your computer.
4. Open the battery cover at the bottom of the mouse and insert the battery in the correct direction (ensure correct polarity).
5. Close the battery cover.
6. The mouse is now ready for use.

Mouse Features

• Left Click: Standard left button function.
• Roller: Scroll wheel for navigation.
• Right Click: Standard right button function.
• DPI Button: (Location indicated in diagram) For adjusting mouse sensitivity.

Diagram:

FCC Compliance Statment

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment

Troubleshooting

• Mouse not responding:
  1. Ensure the USB receiver is securely plugged into a computer’s USB port.
  2. Check if the battery is inserted correctly and has sufficient charge. Replace the battery if necessary.
  3. Try plugging the USB receiver into a different USB port on your computer.
• Intermittent connection:
  1. Ensure there are no large metal objects or other wireless devices causing interference between the mouse and the USB receiver.
  2. Move the mouse closer to the USB receiver.
• DPI adjustment not working:
  1. Press the DPI button to cycle through different sensitivity settings. If it’s still not working, ensure the mouse is properly connected.

FAQs

• Q: What operating systems are compatible with this mouse?
  • A: The S1000 PLUS is compatible with Windows 7, 8, 10, and ISO 10.0 and above.
• Q: How do I change the mouse sensitivity (DPI)?
  • A: Press the dedicated DPI button on the mouse to cycle through different sensitivity settings.
• Q: Where is the USB receiver located?
  • A: The USB receiver is stored inside the battery compartment at the bottom of the mouse.
• Q: What type of battery does this mouse use?
  • A: The manual indicates to place “the battery” in the correct direction, implying a standard battery type (e.g., AA or AAA), but does not specify. Please check the battery compartment for the required battery type.