STOGA SP5254 Wireless Controller User Manual

Powar Land

SP5254 wireless Controller User Manual

Product Description:

(1) All buttons and corresponding functions of original Switch controller are included, including the additional functions such as the turbo, motor vibration and 3D control stick sensitivity adjustment;
(2) 4 status indicators and L/R key decoration lights are available;
(3) 20 function buttons equipped with dedicated Bluetooth “pairing” button;
(4) Built-in dual motors, high-precision 3D control stick;
(5) M1, M2 custom buttons on the back to set macro functions;
(6) “HOME” button can wake up the console;
(7) Any button can wake up controller for connection with the console;
(B) 6-axis gyroscope equipped to lock target quickly and accurately;
(9) Compatible with PC and support X_input mode;
(10) This product is the Switch Pro Bluetooth controller which is capable of communication with Switch console through Bluetooth or wired connection.

STOGA SP5254 Wireless Controller 0

  1. + Button
  2. Action Button X
  3. Action Button A
  4. Action Button B
  5. Action Button Y
  6. Right Stick/R3
  7. Screenshot
  8. HOME
  9. Status LED
  10. Direction Pad
  11. Left Stick/L3
  12. TURBO Button
  13. – Button

STOGA SP5254 Wireless Controller 1

  1. Pairing Button
  2. L
  3. ZL
  4. ZR
  5. R
  6. Type-C

STOGA SP5254 Wireless Controller 2

  1. M1 Button
  2. M2 Button
Function Description:

(1) The ways of connection between Controller and Switch console: (1) Wired connection, connect to Switch console through USB data cable. (2) Connect to Switch console through Bluetooth;

(2) Connect to Switch console through Bluetooth: For the first use of the controller, press and hold the “pairing” button for 3 seconds and release it till the LED 1-4 flashes in tum. Turn on pairing interface on the Switch console for Bluetooth pairing to activate all the functions of the controller, the console allocation light will be on after successful Bluetooth pairing; if the Bluetooth pairing is unsuccessful, the controller will automatically sleep after 60 seconds;

(3) Wire-guided Bluetooth pairing: When the controller is connected to Switch console through USB data cable, press any button to wake up and then unplug the data cable, the controller will automatically connect to Switch console through Bluetooth;

(4) “Pairing” button: Press and hold the “pairing” button for 3 seconds in sleep mode, the controller will enter the state of Bluetooth pairing with host, the LED1-4 will flash in turn. Short press the “pairing” button in the power-on state, the controller will enter the sleep state;

(5) When the controller is connected to Switch console, press the “HOME” button to wake up the console in the case of sleep state;

(6) When the controller is connected to PC through USB data cable, the device name will be displayed as Xbox 360 Controller to achieve the functions of Xbox 360 controller. In the state of Xbox 360 Controller, simultaneously press the “screenshot” button and the “DOWN” of direction pad to change the position of A, B, X, and Y to the button layout of Xbox 360 controller. Repeat the aforesaid operation or reconnect to PC, the button layout of Switch PRO controller will be resumed;

(7) If some functions are not applicable as usual due to the upgrade of Switch console, the controller firmware needs to be upgraded. The controller does not support automatic upgrade when being connected to Switch console. It’s recommended to download the upgrade program and operating instructions, and connect to PC for firmware upgrades;

(8) The controller supports turbo function and turbo speed adjustment. Press one function button while holding the “TURBO” button, then release the “TURBO” button and press the function button again, the turbo function will be activated; If hold the “TURBO” button for the second time and press the function button, the button will be activated with the auto turbo function (direction pad not Included). To cancel the turbo function of the button, please repeat the aforesaid steps, or press and hold the “TURBO” button for 3 seconds to cancel the turbo function of all buttons. Hold the “TURBO” button and perform right 3D up and down operations simultaneously to adjust the turbo speed at three different levels: Fast, Medium and Slow and the default speed is Medium;

(9) The controller supports wake up by any button (except for L3, R3, TURBO, M1, and M2 buttons). After waking up, the controller enters the state of reconnection and LED1-4 will flash in tum; if the pairing between the controller and the Switch console is not inactivated, the controller will be reconnected to the Switch console at this moment (Note: Android and IOS devices are not connected before the controller enters the sleep mode);

(10) The controller has 20 function buttons including UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR, L3, R3, -, +, TURBO, HOME, screenshot and pairing as well as two mapping buttons: M1 and M2, and two 3D control sticks on the left and right;

(11) The controller is capable of vibration function and intensity adjustment. Enter the “Settings” of Switch console to manually activate or inactive the motor vibration function. When the controller Is connected, press and hold the “TURBO” button and perform left 3D up and down operations simultaneously to Increase and decrease the motor vibration intensity. Every operation will be followed with 3-second vibration and a total of four levels are available for the user:100%, 70%, 30% and 0%, the default level is 70%;

(12) Setting of M1, M2 buttons on the back of controller (mappable function buttons include UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR). Operation Steps: (1) When connecting to the console or PC, press the M1 (or M2) while holding down the TURBO. After releasing it, the controller will enter the M1 custom state. The LED 1-4 of the controller will go out and quickly light up the LED 3, 4 (2) In the custom state of M1 bottom, press “A” button, two Illuminated indicators will flash once, which means the “A button has been mapped to M1, press the M1 button again to exit the custom state, 4 channel indicators will resume the original function of channel indication, follow the aforesaid steps to set for the M2 button. (3) In the custom setting, multiple function buttons can be mapped to the M1 (or M2) button in tum, then press the M1 (or M2) button to exit, to set it as macro function button. Press the button in the game, the function will be activated based on the defined interval time of the function buttons (the interval time should be within 2.5 seconds). When the M1 (or M2) button is used as a macro function button, one single custom button can store up to 16 different functions. Clear the functions of M1, M2 buttons: When being connected to the host and other equipment, press and hold the button “Y” and “B”, and then press the “HOME” button to clear the customized functions of M1 and M2 buttons. Once being cleared, they will return to the non-function state (restore the default setting will also clear the customized functions of M1 and M2 buttons).

(13) Sensitivity adjustment of left and right 3D control sticks. Sensitivity adjustment of left 3D control stick: After successful connection to the controller, press TURBO+L3 every time to change the left 3D sensitivity once in the loop of Low→Medium→High→Low; Sensitivity adjustment of right 3D control stick: After successful connection to the controller, press TURBO+R3 every time to change the right 3D sensitivity once in the loop of Low→Medium→High→Low. The default level of left and right 3D control sticks is Low.

(14) Connect the controller to Android and IOS devices. (1) Bluetooth connection to Android device: Activate the Bluetooth setting (such as phone, TV), press the button “Y” and “pairing” simultaneously, the indicators in the middle of the controller (LED2, LED3) will flash quickly to enter the pairing state, search for Bluetooth device “Gamepad” and click pairing for connection. (2) Bluetooth connection to IOS device: Activate the Bluetooth setting, press the button “X” and the “” simultaneously, the indicators on both sides of the controller (LED1, LED4) will flash quickly to enter the pairing state, search for Bluetooth device “Xbox Wireless Controller and click pairing for connection. Once the pairing has been successfully done, when press any button to wake up the controller next time, it will reconnect to Android and IOS devices.

Charging:

Connect to the adapter and the channel indicator will flash; when it has been fully charged, the channel indicator will go out.
When the controller is charged in the connected state, the corresponding channel indicator will flash slowly and stay on when fully charged.

Low Battery Alarm:

When the battery is lower than 3.5V, the corresponding channel indicator will flash to notify the low battery and immediately charging.

Reset:

In the case of abnormal situation, press the “pairing” button to reset the controller.

Electrical Specifications:

Power Supply: built-in polymer battery
Battery Capacity: 500МАН
Charging Voltage: DC5V
Duration: 8 hours
Charging Time: 2.5 hours
Charging Current: 200MA

Instructions on Bluetooth Connection:
  1. After the Switch console is powered on, click the “Home” icon on the right side to enter the main menu
  2. Click the “controllers” in the main menu of the Switch console
  3. Then select the “change Grip/Order”
  4. Click “Change Grip/Order” to enter the pairing interface. Then, press and hold the “pairing” button for 3 seconds for Bluetooth pairing, 4 LED indicators will flash in turn, release the “pairing” button and wait for 5 to 30 seconds. When the controller is connected to the console, the controller icon will appear on the screen and the assigned channel indicator on the controller will be on.
Calibration of Gyroscope Sensor and 3D Control Sticks:

When the controller enters the sleep state, press and hold the left 3D control stick (L3 button) and then press the “R” button, the channel indicators will flash in left and right turn, which means the controller enters the calibration mode of gyroscope sensor and 3D control sticks. Place the controller on a flat surface, press the “+” button and release, the channel indicator LED2 will light up one second later. Move the left and right 3D control sticks around the edges twice, then press the “+” button again and release, the channel indicator LED3 will light up, which means the calibration has been successfully completed, the controller will automatically enter the sleep mode one second later. (The gyroscope sensor and 3D control sticks have been calibrated in this way before factory delivery).

Default Mode Setting:

When the controller enters the sleep state, press and hold the left 3D control stick (L3 button) and right 3D control stick (R3 button), then press the “pairing” button, all the channel indicators will light up, which means the controller enters the default mode. After releasing the “pairing” button, the controller will reenter the sleep state. Note: do not press the “pairing” button more than 2 seconds during the setting process. (The function of button wake-up Is inactivated before factory delivery to avoid battery consumption due to accidental button wake-up during packaging and transportation. The wake-up function has been inactivated in this way before factory delivery)

Exit Default Mode:

In the default mode, the controller can only be powered on by pressing the “pairing” button. Press and hold the “pairing” button, when the controller has been successfully connected to the Switch console once, it will automatically exit the default mode. The function of button wake-up has been activated during the subsequent use.

Calibrate Gyroscope Sensor on SWITCH Host:

When the controller has been successfully connected to the Switch console, return to the main menu and click “Settings” to enter the menu. Move down in the menu and click “Controller and Sensor” and select “Calibrate Gyroscope Sensor” in the menu listed on the right side. Select “Calibrate Controller” in the prompt menu. The console enters the Interface of controller calibration. Place the controller on a flat surface and perform operations according to the instructions on the screen. Press and hold “-” or “+” button on the controller to complete the gyroscope calibration.

Controller Firmware Upgrade:

(1) If some functions are not applicable as usual due to the upgrade of Switch console or the controller functions need to be renewed, the firmware can be upgraded through the PC. Double click the program “20210702-SP5254F-A1.exe to complete the update.

(2) When the controller enters the sleep state, press and hold the left 3D control stick (Note: Do not touch other buttons by accident to wake up the controller), connect controller to PC with TYPE-C data cable, release the left 3D control stick after the connection is completed. Then, “DOWNLOAD” turns from gray to black, which means successful connection. Click “DOWNLOAD” to completed the upgrade as shown in the photo as follows:

STOGA SP5254 Wireless Controller 3

(3) Keep proper connection of the data cable during the upgrade. The upgrade will be completed within a few seconds and the interface after the upgrade Is shown in the photo as follows:

STOGA SP5254 Wireless Controller 4

Documents / Resources

PDF thumbnailSP5254 Wireless Controller
User Manual · SP5254 Wireless Controller, SP5254, Wireless Controller, Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.