redlife Flex Pro Stand

Red Life FLEX Pro Stand
Instruction and Assembly Manual
The Red Life FLEX Pro is a robust, adjustable stand designed to support large-format red light therapy panels, such as the RedLife Pro 600 and RedLife Pro 1200. Its versatile design allows for both vertical and horizontal mounting, making it ideal for full-body treatments in various settings, including clinics, spas, and home environments.
Horizontal Installation

Vertical Installation

Warnings
Please read the instructions carefully before installation. Improper installation may result in serious personal injury or property damage.
- Do not install or assemble this stand if accessories or hardware are damaged or missing. If parts are damaged or lost, please contact us for repair or replacement.
- This stand is only applicable to our company’s specific model of red light panels (RedLife Pro 600; RedLife Pro 1200). If you install light panels that are not specific to our models, we shall not be held responsible for any adverse consequences.
- This stand contains moving wheels, please be careful when using.
- Please ensure that the 4 pulleys are in a fixed position after moving the stand.
- Please do not use this product for anything other than its intended function.
- The distributor assumes no responsibility for any modifications, incorrect installation, or use of devices other than the RedLife Pro 600 or the RedLife Pro 1200. Any damages resulting from use beyond the product’s intended purpose will not be the distributor’s responsibility.
- Misuse of this product may result in death or serious injury. This product is not a toy. Please ensure that this product is out of reach of children or kept under adult supervision when children are present.
- It is recommended that at least two people work together to install this light stand.
- After installation, please check again whether screws and other parts are in good condition before using.
- Device Compatibility & Cascading Instructions: This light stand is designed to support a single red light therapy device for safe and optimal use. This device is not intended for multi-device configurations in its standard form.
- If you wish to mount multiple red light devices (i.e., use in a cascaded setup), additional mounting accessories and structural supports will be required. These accessories are sold separately and must be properly installed to ensure safety and stability. Please consult our support team.
- Improper cascading without approved accessories may compromise stability and void your warranty.
Horizontal Installation accessories

Horizontal Installation instructions
Step 1: Assemble the Base
Note: Install from bottom to top.
- Fix the accessories according to the position indicated by the pink arrow with the corresponding screws/items.
- First install the four casters (Item K) on the base (Item F).
- Insert the lifting rod (Item G) into the base, and fix the upper and lower parts with two short 2pcs screws (Item B).
- Place the two mounting plates (Items I&J) on the front and rear of the lifting rod respectively, and fix them with long 4pcs screws (Item A).
- Place the 2pcs mounting tube (Item L) separately on the mounting plate and fix it with long 4pcs screws (Item A).

Step 2: Complete Installation of the Stand
Install the aesthetic cover (Item M) on the stand. The stand is now assembled and you may attach your red light panel.

Step 3: Install Horizontal Accessories on the Red Light Therapy Panel
- Install the mounting kit (Item H) on the Red Therapy Light Panel with the short 4pcs screws (Item C) corresponding to the hole position.
- Note: The center position of the installed light panel should be consistent with the installation component. It should not be too tilted to one side, so as not to cause any tipping issues after installation.

Step 4: Install the Light Panel on the Stand
- Install the light panel on the stand with 4pcs handle screws (Item D).
- Note: The red light panel requires the assistance of more than one person to install; please be careful of the light panel sliding during installation.


Step 5: The Installation is Now Complete

Vertical Installation accessories

Vertical Installation Instructions
Step 1: Assemble the Base
Note: Install from bottom to top.
- Fix the accessories according to the position indicated by the pink arrow with the corresponding screws/items.
- Install the four casters (Item J) on the base (Item E).
- Insert the lifting rod (Item G) into the base, and fix the upper and lower parts with two short screws (Item B).
- Fix the vertical mounting plate (Item F) and fixing plate (Item K) with 4pcs long screws separately (Item A).

Step 2: Vertical Accessories Installation
Install the aesthetic cover (Item I) on the stand. The vertical mounting bracket (Item H) is placed on the vertical mounting plate (Item F), and the lower end is fixed with screws (Item M) and fixing pieces (Item L). The base of the stand is now assembled.

Step 3: Install the Light Panel on the Stand
The vertical mounting bracket (Item H) can be moved left and right on the vertical mounting plate, adjusted to the position corresponding to the screw hole of the red light panel. Fix the light panel to the mounting brackets with 4 screws (Item C).

Step 4: The Installation is Now Complete

Warranty
- This product has a limited warranty of two years and is valid for products purchased by the original consumer only.
- Our warranty covers any defects in material or workmanship under normal use during the applicable warranty period. During the warranty period, we will repair or replace, at no charge, products or parts of products that prove defective due to improper material or workmanship, under normal use and maintenance.
- If the product cannot be repaired or replaced during the warranty period, we will exchange the defective product for a refund of the purchase price. For the first 180 days, we will be responsible for all shipping costs. After the first 180 days, the customer will be responsible for all product shipping charges while in transit back to our warehouse. Any replacements will be warranted for the remainder of the original warranty period.
- The warranty does not cover any problem that is caused by damage resulting from negligence, improper maintenance, modification, unauthorized repair, storage, and transportation. Our warranty does not cover theft or loss of the product.
- Disassembling or attempting to repair our products poses a risk of injury and will void the warranty. We accept no responsibility or liability for any damage or injury resulting from disassembly, repair, or attempted repair performed by anyone other than an authorized technician. Any such actions by you or a third party are undertaken at your own risk, and we shall not be held liable for any harm or consequences arising from these unauthorized attempts.
- Our products are not intended to diagnose, treat, cure, or prevent any disease. Our products are low-risk, general wellness / fitness products in accordance with the General Wellness: Policy on Low Risk Devices draft released January 20, 2015.
- Please feel free to contact our Customer Support for any other questions.
- 1-888-438-9825
- support@redlifelights.com
Thank You
- We have invested a great deal of time, energy, attention, and research into creating this wonderful, high-quality product for you. As many others have found, we think that this healing modality will help you with your recovery, pain management, and overall wellness. We are honored to be your new wellness journey companion.
- Thank you and congratulations on your purchase! You should anticipate years of easy and flawless performance from the Red Life Device
Documents / Resources
![]() | Flex Pro Stand |
References
- User Manualmanual.tools

