HAMMERHEAD Solid Metal Shower Head Filter Installation Guide

REPLACEMENT FILTER
INSTALLATION
Note: Installation images show the Inline Shower Filter. The steps are the same for Gillian™, though the product looks different.
- Open Filter Housing
Hold the back of the filter housing firmly and unscrew the front half to access the filter.

- Replace Filter
Remove the old filter and place the new one into the front half of the housing. The filter can be inserted in either direction.

- Reassemble Filter
Screw the front of the filter housing back onto the rear half, hand-tight only. As you tighten, the cartridge will seat securely in place.

- Flush Filter
Run warm water for one minute to ensure a fresh, clean start.

Prefer a video walkthrough?
Scan the QR code or visit:
bit.ly/replace-filter

Need a hand? We’re here to help.
Support available Mon-Fri, 9am-5pm ET
Call us: (854) 888-9231
Email us: contact@hammerheadshowers.com
Visit: help.theshowerheadstore.com
SHOWER FILTER
BENEFITS
Cleaner, Healthier Water
Reduces chlorine and impurities so every shower feels fresh, restorative, and gentle on your skin and hair.
Beauty That Shows
Protects skin from dryness and hair from brittleness, leaving both healthier, stronger, and naturally radiant.
SCIENCE BEHIND TRUE FILTRATION
KDF 55
Genuine KDF® copper-zinc alloy media reduces chlorine, heavy metals, and scale for lasting protection.
CALCIUM SULFITE
Rapid-acting media that instantly reduces chlorine, delivering cleaner, fresher water.
FILTER REPLACEMENT
SUBSCRIBE & NEVER MISS A FILTER CHANGE
Replace every 3 months to keep your filter performing at its best.
To subscribe scan
the QR code or visit:
bit.ly/filter-reminder


Documents / Resources
![]() | Solid Metal Shower Head Filter |
References
- bit.ly/filter-reminderbit.ly
- bit.ly/replace-filterbit.ly
- help.theshowerheadstore.comhelp.theshowerheadstore.com
- User Manualmanual.tools
