GARD PRO GPU3 Smart Watch User Manual

GARD-PRO-logo

GARD PRO GPU3 Smart Watch

GARD-PRO-GPU3-Smart-Watch-product-image

Specifications

  • Model: Smart Watch HVIN:GARD PRO ULTRA 3
  • Main Interfaces: 5
  • Menu Modes: Honeycomb, Rapids, Halo, List, Dial, Waterfall
  • Charging: Magnetic head charging cable

Instructions

Quick User Guide for Watch

Turn on/off

  1. When the watch is turned off, charging or long pressing the down button for 3 seconds will vibrate the wristband to turn it on;
  2. When the watch is powered on, switch to the shutdown interface (“Settings” – “System Menu”) or press and hold the button for 3 seconds. A slide-to-shutdown/slide-to-restart/slide-to-call option will pop up. Select slide-to-shutdown.

Watch operation

  1.  When the watch is in the on-state, raising your hand or pressing a button can wake up the watch, and swiping can switch between interfaces.
  2. The screen will turn off automatically after 5 seconds without any operation. Users can modify the screen timeout on the display and brightness settings page in the app or on the watch.
  3. The watch is set to enable 24-hour heart rate monitoring by default when it leaves the factory, and users can choose to enable or disable it in the general settings of the device interface in the app.

Device Connect

  • Open the app, click “Device” – “Add Device” – “Select Device”, click on the corresponding model, and follow the prompts to connect.
  • Bluetooth connection: After successful pairing, the APP automatically saves the Bluetooth address of the watch. Whenever the APP is opened or running in the background, it will automatically search for and connect to the watch.
  • Data Synchronization: Manually pull down to synchronize data on the APP homepage; the watch can store 7 days of offline data. The more data there is, the longer the synchronization time will be, up to approximately 2 minutes.
  • Synchronize Contacts: Enter the app, click “Device” – “Contacts” – “Open”, and select up to 100 contact names.

Watch Overview

Touch screen: Slide down to access the status bar, slide up to enter the frequently used functions interface, slide left to enter the functions interface, and slide right to view notifications.

  • Up button
  • Click: Enter the function menu, one-click return to the main interface/screen on (in standby mode).
  • Long press: Enter sports mode Middle button.
  • Click: Enter sports mode/screen on (in standby mode).
  • Long press: Call SOS emergency contact Press the button.
  • Click: Return to the previous level/Turn off the screen (in the main interface)/Turn on the screen (in standby mode). Long press: Power on/off.
  • Charging: Align the magnetic head of the charging cable with the charging contacts on the bottom of the watch, and it will automatically attach for charging (positive attraction, negative repulsion).

GARD-PRO-GPU3-Smart-Watch-image-2

Main interface

Main interface: The watch has 5 main interfaces. Long press on the main interface for two seconds, and after a vibration, a thumbnail view will appear. You can slide left or right to switch between watch faces. After the app is paired and connected, the watch will synchronize the time, date, day of the week, and other information with the phone.

GARD-PRO-GPU3-Smart-Watch-image-3

Massive Watch Faces/Custom Watch Faces: Open the app, and when connected to a watch, click “Device” – “Watch Face Market” to enter the Watch Face Center to select or customize a watch face.

  • There are 6 menu modes: Honeycomb, Rapids, Halo, List, Dial, and Waterfall. Click “Settings” and then “Main Image” to make your selection.

GARD-PRO-GPU3-Smart-Watch-image-4

Function menu

  • Calls, Daily Activities, Exercise, Exercise Record, Heart Rate, Sleep, Blood Oxygen, Body  Temperature, Stress, Music, Voice Assistant, Weather, Compass, Altitude Barometer, Breathing Training, World Clock, Medication Reminder,  UV Index, Notifications、 Stopwatch、 Alarm Clock、 Timer, Calculator, Remote Camera, Flashlight,  Find Phone, Women’s Health, Settings.

Set menu

  • Replace dial, language selection, screen-off display, display and brightness, sound and vibration, theme, password, time and date, do not disturb mode, motion recognition, lower button settings, overlay screen-off, QR code, system menu, about.

Precautions

  • Please do not disassemble, repair, or modify this machine on your own.
  • Please avoid subjecting your watch to strong impacts, extreme heat, and direct sunlight.
  • This device uses a 5V 500MA charger. It is strictly prohibited to use an overvoltage or overloaded power source for charging.
  • The operating environment for this device is between 0 degrees and 45 degrees. It is strictly prohibited to throw it into fire to avoid causing an explosion.
  • When the watch gets wet, please wipe it dry with a soft cloth before charging, otherwise it may corrode the charging contacts This point leads to charging failure.
  •  Do not touch chemicals such as gasoline, cleaning solvents, propanol, alcohol, or insect repellents.
  • Please do not use this product in a high-voltage or high-magnetic environment.
  • If you have sensitive skin or wear your watch too tightly, you may feel discomfort.
  • It is not advisable to wear a watch while taking a hot bath.
  • Please promptly wipe away the sweat droplets on your wrist. Prolonged contact of the watchband with soap, sweat, allergens, or pollutants may cause skin irritation and itching.
  • If you use your watch frequently, it is recommended to clean it weekly. Wipe it with a damp cloth and use a mild soap to remove any dirt or stains Remove oil stains or dust.
  • No special requirements, please do not enable more push notifications.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject  to the following two conditions:

  1.  This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Install the watch app

Scan the QR code below or visit major app stores to download and install “GloryFitPro”. Device requirements: iOS 11.0 or above; Android 5.0 or above, supports Bluetooth BLE 5.3.

GARD-PRO-GPU3-Smart-Watch-image-1

FAQ

What should I do in case of interference with the device?

If there is interference with the device, ensure that it is not causing any harmful interference. The device must also accept any interference received.

How do I customize watch faces?

To customize watch faces, open the app and connect to the watch. Click on Device - Watch Face Market to access the Watch Face Center for customization options.

Documents / Resources

PDF thumbnailGPU3 Smart Watch
User Manual · GPU3, GPU3 Smart Watch, Smart Watch

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Si può tarare il misuratore di pressione sanguigna

    Luigi asks Si può tarare il misuratore di pressione sanguigna
    Manuals+ clarified question
    Question

    Can the blood pressure monitor be calibrated?

    Answer

    Based on the user manual for the GARD PRO ULTRA 3, there are no specific instructions provided for calibrating the blood pressure monitor. The manual lists "Blood Oxygen" and "Heart Rate" as available functions, but it does not detail a calibration process for blood pressure within the GloryFitPro app or on the watch itself.

    To ensure the most accurate readings possible for health metrics, the manual suggests the following:

    • Wear the watch tightly: The watch uses light reflection sensors. If it is not worn tightly, ambient light can enter the sensor and affect measurement accuracy.
    • Clean the sensors: Regularly wipe the back of the watch with a damp cloth to remove dirt or sweat that might interfere with the sensors.
    • App Synchronization: Ensure your watch is properly connected to the GloryFitPro app to keep all data synchronized.

    Note: Smartwatch health readings are generally for reference only and should not be used for medical diagnosis. If you require precise blood pressure monitoring, it is recommended to use a dedicated medical-grade device.

  2. L’orologio Gard pro ha applicazioni per la nautica?

    🇮🇹 Anonymous asks L'orologio Gard pro ha applicazioni per la nautica?
    Manuals+ clarified question
    Question

    Does the Gard Pro GPU3 smart watch have boating applications?

    Answer

    Based on the user manual for the GARD PRO ULTRA 3 (GPU3), there are no specific "boating" or "nautical" applications listed in the standard function menu. The watch includes general outdoor and navigation tools that may be useful for boating, such as:

    • Compass: For directional navigation.
    • Altitude Barometer: For monitoring atmospheric pressure and elevation.
    • Weather: For checking local conditions.
    • UV Index: To monitor sun exposure.

    The watch uses the GloryFitPro app for synchronization. While the manual mentions an "Exercise" mode, it does not explicitly list water sports or boating activities. Additionally, the manual advises against wearing the watch in hot baths and suggests wiping it dry immediately if it gets wet to prevent corrosion of the charging contacts.

    If you are looking for specialized marine charts or sonar integration, this device does not appear to support those features natively.

    Note: If you are referring to a different Gard Pro model, please specify, as features can vary between versions.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.