SonoFF MINI-ZBDIM-E Zigbee Dimmer Wall Switch User Manual

SonoFF-LOGO

SonoFF MINI-ZBDIM-E Zigbee Dimmer Wall Switch

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-PRODUCT

Introduction

Orb-ZBDIM is a Zigbee 3.0 smart dimmer switch, designed to easily replace traditional wall switches and integrate ordinary lighting fixtures into a smart home system. It offers broad compatibility with various dimmable light sources, including LED bulbs, incandescent lamps, halogen lights, and electronic transformers. The switch incorporates built-in features such as overheat protection, power detection, and calibration, ensuring both smooth dimming performance and long-term safety and stability. Additionally, Orb-ZBDIM supports Zigbee signal relaying, which enhances the communication stability of the entire Zigbee network.

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-1 SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-2

  1. Brightness Increase Button
    Short or long press: Increase the brightness of the light
  2. Brightness Decrease Button
    Short or long press: Decrease the brightness of the light
  3. Light On/Off Button
    Short press: Turn the light on or off
  4. Device Button
    1. Short press: Turn the light on or off
    2. Press and hold for 5 seconds: Device enters network pairing mode (pairing duration: 3 minutes)
    3. Press and hold for 10 seconds:
    4. Automatic dimming calibration
    5. Press and hold for 15 seconds: Restore factory settings
  5. LED Indicator (Blue)
    1. Slow flash: Device is in pairing mode
    2. Fast flash: Abnormal connection with the gateway
    3. Keeps on: Normal connection with the gateway
    4. Keeps off: Pairing failure/Timeout
    5. Flashes five times quickly: Trigger
      Factory Reset
      Breathing pattern: Device is calibratingSonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-3

Platform Certification

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-4

Specification

  • Product name
    Orb-ZBDIM
  • Product series
    Fusion Series
  • Product type
    Zigbee Dimmer Wall Switch
  • Model
    MINI-ZBDIM-E
  • MCU
    EFR32MG21
  • Rating
    220-240V~ 50Hz 400W Max Resistive load ε
  • LED
    200VA
  • Zigbee
    IEEE 802.15.4
  • Net weight
    83g
  • Product dimension
    86x86x33.7mm
  • Color
    White
  • Casing material
    PC
  • Diameter of wiring (recommended)
    0.75mm² to 1.5mm² / 18AWG to 16AWG SOL/STR copper conductor only
  • Applicable place
    Indoor
  • Working temperature
    10T40 (-10℃~40℃)
  • Working humidity
    5-95%RH, non-condensing
  • Certification
    CE/RoHS

Installation

Power off

WARNING

  1. Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!
  2. To ensure the safety of your electrical installation, it’s essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 2A has been installed before the MINI-ZBDIM-E.

Pry off the switch cover

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-6

Wiring instruction

Make sure all wires are connected correctly.

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-7

Instructions for wiring symbols

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-8 SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-9

Power on

After powering on, the device will enter the pairing mode by default during the first use, and the LED signal indicator will “flash slowly”.

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-10

The device will exit the pairing mode if you do not operate it within 3mins. When you want to enter the pairing mode again, long-press the device button on the device for 5 seconds until the signal light “flashes slowly” and release.

Add device

    1. Download the eWeLink App
      Please download the “eWeLink” App from Google Play Store or Apple App Store.SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-11
    2. Add SONOFF Zigbee gateway
    3. Network configurationSonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-12 SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-13

Compatible SONOFF Gateways

Recommended SONOFF gateway models: ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost Other compatible SONOFF gateway models: ZBDongle-P, ZBDongle-E, Dongle-M, Dongle-PMG24, Dongle-LMG21

Installation

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-14

Factory Reset

Trigger conditions (any one condition met)

  • Delete the device on eWeLink App.
  • The device that has been successfully paired can be paired again with another eWeLink account to add it.
  • Press and hold the device button for 15 seconds.

EU Declaration of Conformity

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type MINI-ZBDIM-E is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/

For CE Frequency

EU Operating Frequency Range:
Zigbee: 2405–2480 MHz
BLE: 2402–2480 MHz

EU Output Power:
Zigbee≤10dBm
BLE≤10dBm

Under normal use of condition, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the body of the user.

WEEE Disposal and Recycling Information

WEEE Disposal and Recycling Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

SonoFF-MINI-ZBDIM-E-Zigbee-Dimmer-Wall-Switch-FIG-16

Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, 518000, China
Service email: support@itead.cc Website: sonoff.tech
Made in China

Frequently Asked Questions

Q: How to restore factory settings?

To restore factory settings, press and hold the Device Button for 15 seconds.

Documents / Resources

PDF thumbnailMINI-ZBDIM-E Zigbee Dimmer Wall Switch
User Manual · MINI-ZBDIM-E Zigbee Dimmer Wall Switch, MINI-ZBDIM-E, Zigbee Dimmer Wall Switch, Dimmer Wall Switch, Wall Switch

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.