HDMI Wireless Extender User Manual

HDMI - Logo

USER MANUAL
HDMI Wireless Extender

Enjoy the vivid world
Before using the product, please read this manual carefully and keep it properly.
Date of publication: 2025-10-20

Introduction :

This HDMI Wireless extender uses 5G modules to enable high-speed, high performance wireless communication among consumer electronics, computer and mobile devices. It combines high bandwidth capacity and strong error correction capability, Realize high-definition video transmission and support wireless screen projection Supports wireless casting of mobile phone or computer screens to display devices. It transmit the signal up to 150m in the open area,also go through the wall.

HDMI Wireless Extender - Introduction

Features :

* Support HDCP1.3;
* Support standard protocol IEEE802.11a/n ;
* Support Miracast, Airplay wireless protocol;
* Support Android phone /PC/Apple wireless screen sharing;
* Working in 5G frequency band,not easy disturbed to wireless signals;
* Wireless extender mode,the longest distance can be 150m when open space without any barriers, normal go through the wall up to 40 meters (Laboratory test environment);
* The transmission distance of the same screen mode can reach up to 50 meters;
* The full metal casing has better heat dissipation and stronger anti-interference;
* External high-gain antenna, better receiving effect, more stable.

Specifications :

HDMI input resolution ….. 1280X720P60/50hz, 720X480P60hz,720X576P50hz, 1920x1080P60/50/30/24hz
HDMI output resolution …………………………… 1920x1080P/60Hz
Support audio format ..………..…………………………. Stereo audio
Max bandwidth ……..………………………….……….…148.5MHz
Max baud rate ………………………….….……….….… 1.485Gbps
Transmitter Max working current ………………………….… 430mA
Receiver Max working current ……………………………… 300mA
Operating Temperature range ………………..…. (-15 ℃ to +55 ℃)
Dimension …………….. 76x49x15 (mm) , antenna length: 108mm
Weight ……………………………………………………………………. 75gx2

Function Interface Figure :

HDMI Wireless Extender - Function Interface Figure 1

  1. DC/5V — 5V DC Power input port
  2. Power indicator
  3. HDMI In — HDMI Input
  4. M— Switch Between Wireless Extender Mode and Screen Mirroring Mode.
  5. TX/RX Connection success indicator / Pairing success indicator
  6. ANT— Antenna

5. In the case of pairing: HDMI In and HDMI Out are inserted. After successful pairing, the indicator light flashes slowly; In the case of wireless extender connection: TX/RX connection success indicator (flashes while connecting, stays on after successful connection)

HDMI Wireless Extender - Function Interface Figure 2

  1. DC/5V — 5V DC Power input port
  2. Power indicator
  3. HDMI out — HDMI output
  4. M— Screen rotation in the screen mirroring mode 90°/-180°/-270°/-0°) In the screen mirroring mode, long press the M button to switch channels
  5. In the case of pairing: HDMI In and HDMI Out are inserted. After successful pairing, the indicator light is always on; In the case of wireless extender connection: HDMI Out Insert the display, the indicator light is always on;
  6. ANT–External antenna
    Note: The wireless extender mode is entered by default when the machine is turned on.
    1. In Wireless Extender Mode, press the M button on the TX device to switch between Screen Mirroring Mode and Wireless Extender Mode.
    2. When only RX is used, RX defaults to the screen mirroring mode.

Wireless extender mode:

Connection and Operation:

  1. Connect the HD source to the input of the wireless extender
    TX with 1 HDMI cable.
  2. Connect the output of the wireless extender RX to the display device with 1 HDMI cable.
  3. Use a Type-c USB cable to power the TX and RX.

Matching code:
Note: TX and RX had been matched well in factory; If the users need to match again, please follow the steps:

  1. Connect the power supply to the Transmitter and receiver ends.
  2. The transmitter and receiver are connected to HDMI In and HDMI Out through an HDMI male to male cable.
  3. After successful pairing, the indicator light of RX is on and the indicator light of TX flashes slowly.

HDMI Wireless Extender - Wireless extender 1

Same mirroring mode:

Screen sharing method:

  1. Android and PC screen sharing method
    HDMI Wireless Extender - Same mirroring 1

Apple’s same-screen method
HDMI Wireless Extender - Same mirroring 2Note: In the same screen interface, short press twice to switch between Chinese and English menu. Screen rotation switch needs dynamic interface or video to take effect immediately.
HDMI Wireless Extender - Same mirroring 3Channel switching method in same-screen mode: Long press theM button of RX, The monitor will display the following image:

HDMI Wireless Extender - Same mirroring 4 HDMI Wireless Extender - Same mirroring 5

Note: The factory default setting is Channel 149, If it is for Europe and Japan regions, switch to channel 44.
( If screen projection fails, you can also long-press the M button on the RX, to switch the channel, ensuring it is set correctly )

Package include:

1. 150M HDMI Wireless Extender
2. Type-C USB cable
3. HDMI cable (male to male)
4. User manual
1 pair
2 PCS
2 PCS
1 PC

HDMI Wireless Extender - icon 1

Made in China

Documents / Resources

PDF thumbnailHDMI Wireless Extender
User Manual · 150m, HDMI-117, HDMI Wireless Extender, HDMI, Wireless Extender, Extender

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.