ECHTPOWER 1133 Wireless Game Controller User Manual

ECHTPOWER-loogECHTPOWER 1133 Wireless Game Controller

ECHTPOWER-1133-Wireless-Game-Controller -product

Supported Platforms
Windows 7 and above, NS 3.0 and above, Android 8.0 and above, iOS 18 and above

Package Contents

  • Game Controller x1
  • Controller Charging Dock x1
  • Controller Receiver x1
  • Type-C Charging Cable x1
  • User Manual x1

ECHTPOWER-1133-Wireless-Game-Controller - (1) ECHTPOWER-1133-Wireless-Game-Controller - (2)

Product Specifications

Product Model 1133
Product Dimensions 110*158*75mm
Product Weight 380g
Charging Power 5V/0.5A Max
Charging Time 3H
Battery Life 6-8H
Battery Capacity 800mAh

Controller Button Map

ECHTPOWER-1133-Wireless-Game-Controller - (3) ECHTPOWER-1133-Wireless-Game-Controller - (4) ECHTPOWER-1133-Wireless-Game-Controller - (5) ECHTPOWER-1133-Wireless-Game-Controller - (6)

Instructions for UseECHTPOWER-1133-Wireless-Game-Controller - (7)

Before using for the first time, charge the controller to activate it.

Bluetooth Connection to Switch

  1. With the controller powered off, toggle the switch to the NS position.
  2. Hold the Home button for 3 seconds until the LED light flashes white.
  3. Turn on the Switch console to access the pairing interface, and wait for the Bluetooth pairing to complete.

ECHTPOWER-1133-Wireless-Game-Controller - (8)

Wired Connection to Switch

  • After connecting the controller to the Switch console via a USB cable, press any button on the controller to wake it up, and it will be ready for use.
  • When the cable is disconnected, the controller automatically switches to Bluetooth connection with the Switch console.

ECHTPOWER-1133-Wireless-Game-Controller - (9)

Connect the Receiver to the PC

  1. With the controller turned off, flip the switch to the receiver position.
  2. Press and hold the home button for 3 seconds until the LED light flashes red.
  3. Plug the receiver into the PC’s USB port, press and hold the pairing button on the receiver for 3 seconds until the LED light flashes, and wait for pairing to complete.
  4. Once pairing is successful, the LED indicator on the receiver will remain lit.
  5. ECHTPOWER-1133-Wireless-Game-Controller - (10)Alternatively, you can plug the receiver into the controller’s base, connect the base to the PC via the data cable, and follow the above pairing steps.

ECHTPOWER-1133-Wireless-Game-Controller - (11)WIRED CONNECTION TO PC
Use a data cable to connect the controller to your computer, then press the home button on the controller to start up and use it normally. ECHTPOWER-1133-Wireless-Game-Controller - (12)BLUETOOTH CONNECTION (PC/iOS/ANDROID PHONE/ TV) 

  • When the controller is turned off, switch the power switch to “Bl mode. Press and hold the Home button for 3 seconds until the LED light flashes blue (entering pairing mode).
  • Open the device’s Bluetooth settings, search for and connect to “Xbox Wireless Controller. ECHTPOWER-1133-Wireless-Game-Controller - (13)

CONTROLLER PC MODE SWITCH 

  • After the controller is properly connected to the PC, the initial state is XInput mode. Device name: Xbox 360 controller, LED display: red steady light
  • In Xinput mode, press and hold theECHTPOWER-1133-Wireless-Game-Controller - (14)buttons simultaneously for 3 seconds to switch to Dinput mode. Device name: Gamepad, LED display: red and blue LEDs lit.
  • In Dinput mode, press and hold theECHTPOWER-1133-Wireless-Game-Controller - (14)buttons for 3 seconds to switch to NS mode. Device name: Pro Controller, LED display: blue LED stays on.
  •  In NS mode, holding down theECHTPOWER-1133-Wireless-Game-Controller - (14)buttons simultaneously for 3 seconds switches back to Xinput mode.

ECHTPOWER-1133-Wireless-Game-Controller - (15)

*Note: Mode switching is only available when connected via a wired connection or receiver. Mode switching is not supported when connected via Bluetooth (including PC) or other devices.

ECHTPOWER-1133-Wireless-Game-Controller - (16)

RAPID FIRE FUNCTION (TURBO FUNCTION)

  • Supported buttons: ABXY buttons, LB/RB buttons, LT/RT triggers.
    Manual Rapid Fire: Hold down the M button and press the desired button once to activate the manual rapid fire function. ECHTPOWER-1133-Wireless-Game-Controller - (17)
  • Automatic Rapid Fire: After setting manual rapid fire, hold down the M button again and press the same button once to switch to the automatic rapid fire function. ECHTPOWER-1133-Wireless-Game-Controller - (18)
  • Burst Fire Clear: After setting burst fire, hold down the M button and press the same button once to disable the burst fire function. ECHTPOWER-1133-Wireless-Game-Controller - (19)
  • Clear All Burst Fire at Once: Hold down the M button for 5 seconds to disable the burst fire function for all buttons. ECHTPOWER-1133-Wireless-Game-Controller - (20)

BACK BUTTON PROGRAMMING FUNCTION

Back Button SettingECHTPOWER-1133-Wireless-Game-Controller - (21)

  • Supported buttons: ABXY, D-pad, LB, RB, LT, RT, L3, R3.
  • Setup Method: After successfully connecting the controller, hold down the M1 or M2 button, then press the M button for 2 seconds. The status indicator light will flash slowly. Release all buttons at this point. Then input the action buttons you wish to record in sequence. After the recording is complete, press the M1 or M2 button again to finish the setup. The controller will vibrate once.
  • Up to 16 buttons can be recorded. ECHTPOWER-1133-Wireless-Game-Controller - (22)

Back Button Clear efECHTPOWER-1133-Wireless-Game-Controller - (23)

  • Unlocking method: Hold down the M1 or M2 button, then press the M button for 2 seconds. The status indicator light will flash slowly. At this point, press the M1 or M2 button again to clear the back button (M1 or M2) you wish to delete.ECHTPOWER-1133-Wireless-Game-Controller - (24)

 VIBRATION INTENSITY ADJUSTMENT FUNCTION 

  • After successfully connecting the controller to the device, press and hold the M key, then push the left joystick up and down to adjust the motor vibration intensity. ECHTPOWER-1133-Wireless-Game-Controller - (25)
  • The motor vibration intensity has four levels: 100%-60%-30%-0%. The factory default vibration intensity level is 60%. ECHTPOWER-1133-Wireless-Game-Controller - (26)

RGB LIGHT MODE SWITCHING FUNCTION 

  •  Four RGB light modes: asynchronous different colors breathing, synchronous same colors breathing, synchronous different colors breathing, and mixed colors.
  •  Press the M key + R3 key once to switch the light mode once. ECHTPOWER-1133-Wireless-Game-Controller - (27)

RGB LIGHT BRIGHTNESS ADJUSTMENT FUNCTION 

  • Three levels of RGB light brightness: 100%-60%-30%, factory default is 100% brightness.
  • Decrease brightness: Hold down the M key and tilt the left joystick to the left.
  • Increase brightness: Hold down the M key and tilt the left joystick to the right. ECHTPOWER-1133-Wireless-Game-Controller - (28)
  • Tum RGB on and off: Hold down the M key+ R3 key for 5 seconds. ECHTPOWER-1133-Wireless-Game-Controller - (29)

Tum RGB on and off: Hold down the M key+ R3 key for 5 seconds. 

  • Place the controller flat on a table and ensure that it is turned off.
  • Press the L3 and R1 buttons simultaneously and wait for the controller’s LED light to flash red and green alternately to enter calibration mode.
  • Press the A button, and the blue LED light will illuminate. Then pick up the controller and rotate the left and right joysticks three times each, and press the long-travel trigger all the way down three times.
  • Press the A button again. The green LED light will illuminate, indicating calibration is complete. The controller will automatically power off  L3 button+RB button

ECHTPOWER-1133-Wireless-Game-Controller - (30)

CONTROLLER RESET
When the controller malfunctions or freezes, simply charge the controller to reset it.

OTHER FUNCTIONS
For functions such as firmware updates, key setting changes, and joystick dead zone adjustments, please download the  Keylinker application to configure settings.

CONTACT INFORMATION

  • Tel: 0755-21010839
  • Email: service@echtpower.com
  • Web: www.echtpower.com
  • Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
  • Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

DECLARATION OF CONFORMITY

Model: 1133
Declaration of Conformity
The product conforms to EC standards for radio interference. Here, Shenzhen Mike Morgen Technology Co.,Ltd .in Shenzhen announces that 1133 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11 :2020;EN 50663:2017,EN 62479:2010;ETSI EN 301 489-1 V2.2.3(2019-11 );ETSI EN 301 489-17 V3.2.4(2020-09);ETSI EN 300 328 V2.2.2(2019-07).
The full text of the EU Declaration of Compliance can be found on: www.echtpower.com

The product conforms to UK standards for radio interference. Here, Shenzhen Mike Morgen Technology Co.,Ltd .in Shenzhen announces that 1133 radio equipment conforms to the Directive EN IEC 62368-1:2020;BS EN 50663:2017,BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11 ); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).
The full text of the UKCA Declaration of Compliance can be found on:
www.echtpower.com

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment in to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio-TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: 2BHV8-1133
The symbol means the product should not be disposed of with household waste but be brought to an appropriate collection point to enable recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste.
Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

PRECAUTION

  • ECHTPOWER-1133-Wireless-Game-Controller - (9)Do not expose it to liquid
  • ECHTPOWER-1133-Wireless-Game-Controller - (9)Do not disassemble it
  • ECHTPOWER-1133-Wireless-Game-Controller - (9)Avoid dropping it
  • ECHTPOWER-1133-Wireless-Game-Controller - (2)Avoid extremely high or low temperatures

FAQ

What platforms does the gamepad support?

It supports Windows 7 and above, NS 3.0 and above, Android 8.0 and above, iOS 18 and above.

How do I connect the gamepad to a Switch console?

You can connect via Bluetooth or a wired connection using a USB cable.

Can I use the gamepad with my PC?

Yes, you can connect it using a receiver or a USB cable.

How do I switch modes on the PC?

Use the buttons to switch between Xinput, Dinput, and NS modes.

What is the battery life of the gamepad?

The battery life is between 6 to 8 hours.

Documents / Resources

PDF thumbnail1133 Wireless Game Controller
User Manual · 1133, 1133 Wireless Game Controller, Wireless Game Controller, Game Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.