MAD CATZ TE3 Button Arcade Controller

Specifications
- Product Name: ALL-BUTTON ARCADE CONTROLLER
- Compatibility: PC, PS4, Switch
- Functions: TURBO, HOME, BACK, START
- Lighting Effects: Fantasy, Breathing Fantasy, Array, Solid Single Color, Breathing Single Color, Ripples, All-Lights-On-Except-One, All-Lights-Off-Except-One
- Color Sequence: Red -> Amber -> Yellow -> Green -> Blue -> Indigo -> Violet
Product Usage Instructions
Connection:
- To connect the controller, follow the manufacturer’s instructions provided in the manual.
Changing Lighting Effect:
- Select from various effects and color sequences.
- Adjust brightness and speed using specific button combinations.
Switching Directional Control Mode:
- D-PAD Mode: BACK+START+DOWN
- Left Joystick Mode: BACK+START+LEFT
- Right Joystick Mode: BACK+START+RIGHT
Switching SOCD Mode:
- SOCD Neutral: HOME+START+DOWN
- Absolute Up Priority: HOME+START+UP
- Last Input Priority: HOME+START+LEFT
Programming M1/M2/M3/M4:
- Press and hold HOME+BACK+START for three seconds.
- Select M1, M2, M3, or M4 and assign commands.
- Save settings by holding HOME+BACK+START again for three seconds.
- Switching between X-INPUT and D-INPUT (Windows only):
- Refer to the manual for specific instructions on switching between X-INPUT and D-INPUT on Windows.

How to use
How to Connect:
-
Take out the USB-A to USB-C cable from the retail box.
-
Plug the above cable into N.E.K.O. and your system.
-
X-INPUT mode is recognized in Windows by default.
-
When connecting to Switch, please turn on the Pro Controller Wired Communication by following the steps below:
-
Select“ System Setting” from the HOME menu.
-
Go to“ Controllers and Sensors” and choose“ Pro Controller Wired Communication”.
-
Click on“ OK” in the pop-up window and complete the setting.
-
Turn off the setting by clicking on“ Pro Controller Wired Communication” again.
-
How to Change the Lighting Effect:
- Effects: Fantasy, Breathing Fantasy, Array, Solid Single Color, Breathing Single Color, Ripples, All-Lights-On-Except-One, All-Lights-Off-Except-One.
- Color Sequence: Red -> Amber -> Yellow -> Green -> Blue -> Indigo -> Violet
- Fantasy is set as default.
- Adjustment:
- BACK+START+X: Switch to the next effect.
- BACK+START+A: Switch to the next color.
- BACK+START+Y: Increase the brightness, from 0% to 25%, 50%(by default), 75% and 100%.
- BACK+START+B: Reduce the brightness, from 100% to 75%. 50%(by default), 25% and 0%.
- BACK+START+RB: Increase the speed, from 25% to 50%, 75% and 100%.
- BACK+START+RT: Reduce the speed from 100% to 75%, 50% and 25%.
- BACK+START+LT: Switch the effect on/off.
How to Switch Directional Control Mode:
- D-PAD Mode(by default): Press BACK+START+DOWN, UP/DOWN/LEFT/RIGHT will flash red light three times.
- Left Joystick Mode: Press BACK+START+LEFT, UP/DOWN/LEFT/RIGHT will flash amber light three times.
- Right Joystick Mode: Press BACK+START+RIGHT, UP/DOWN/LEFT/RIGHT will flash yellow light three times.
How to Switch SOCD Mode:
- SOCD Neutral(by default): Press and hold HOME+START+DOWN,UP/DOWN/LEFT/RIGHT will flash indigo light three times.
- Absolute Up Priority: Press and hold HOME+START+UP, UP/DOWN/LEFT/RIGHT will flash blue light three times.
- Last Input Priority: Press and hold HOME+START+LEFT, UP/DOWN/LEFT/RIGHT will flash violet light three times.
How to program M1/M2/M3/M4:
- Press and hold HOME+BACK+START for three seconds, all the buttons rapidly flash in red light.
- Press M1, M2, M3 or M4,its light will turn solid white while the rest remain flashing in red.
- Press the assignable button ‒ or input a string of commands: they will change to solid white while the rest remain flashing in red.
- Press and hold HOME+BACK+START again for three seconds, the settings will be saved.
- Please note that the following buttons are assignable: UP, DOWN, LEFT, RIGHT, A, B, X, Y, RB, RT, RS, LB, LT and LS.
- M-Macros can hold up to 16 commands, but only assignable buttons may be used.
How to Switch between X-INPUT and D-INPUT (Windows only:
- X-INPUT is set by default. Press and hold “-”+HOME+BACK+START for three seconds. When D-INPUT is switched successfully, all the buttons will rapidly flash in white light.
- Press and hold “-”+HOME+BACK+START again for three seconds. When X-INPUT is switched back successfully, all the buttons will flash in pink color three times.
How to Turn TURBO On or Off:
- Press and hold the programmable button, then press TURBO, the selected programmable button will flash in white light.
- Release the buttons and the selected button will slowly flash in white light when the TURBO is turned on.
- Press the button that has the TURBO turned on, it will rapidly flash in white light.
- Press TURBO again to turn it off.
- Press and hold TURBO for three seconds to clear all TURBO related settings.
How to Reset:
- Press and hold “-”+START for ten seconds to restore the factory default settings, all the buttons will turn solid white for three seconds.
Firmware Options:
- The Standard Version of firmware supports both button remapping and macro programming.
- The Tournament Version of firmware supports button remapping only. In this version, remapped buttons will replace the original functions, meaning the original button will be disabled (lighting effects and other settings remain unchanged).
How to Install the Firmware:
This product comes pre-configured as the Standard Version, which supports button remapping, macro programming, and includes TURBO.
An alternative Tournament Version is also available. It is designed to meet competitive regulations and does not include TURBO. In this version, only button remapping is supported. Please note that when a button is remapped, it will replace the original function of that button (lighting effects and other settings will remain unchanged).
- Standard vs Tournament Version

- Resource Location
- Visit the official page: https://www.madcatz.com/En/Support/Downloads
- Select CONTROLLERS, then select N.E.K.O.
- Download the firmware version of your preference.
Installation
- Launch the downloaded firmware application (hereafter referred to as the “application”).
- While holding down TURBO, connect the product to your PC via USB. The application will display ONLINE in green text.
- Click DOWNLOAD in the application and wait for the update to complete.
- Once the update is complete, the product’s button light will turn on, and the application will display OFFLINE in red text along with a SUCCESS message.
Package Contents
- N.E.K.O. All-Button Arcade Controller x 1
- 3m USB-A to USB-C Cable x 1
- Hexagon Screwdriver x 1
- Keycap / Switch Puller x 1
- QR Code for QSG x 1
- Warranty Card x 1
- Mad Catz Logo Sticker x 1
System Requirements:
- Windows 7/8/8.1/10/11、PS4、Switch
Troubleshooting
- Disconnect the USB cable from the system and reconnect it.
- If possible, try connecting N.E.K.O. to another system.
- Make sure the USB port is powered.
- Try to reboot the system.
- For any further advice or support, please visit www.madcatz.com.
Warning:
- Operating voltage: DC 5.0V
- Maximum working current: ≤200mA (lamp fully open)
- To reduce the risk of fire or electric shock, do not expose this device to water or moisture.
- Do not modify the device as this will void the warranty and may cause unexpected damage to the device.
- If you experience any discomfort while operating this product, stop using this device immediately. If the condition persists, seek medical attention immediately.
- This product contains some small parts. If swallowed, it may cause choking. Therefore, it is not suitable for children under 3 years old.
Fcc
FCC STATEMENTS
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference;
- this device must accept any interference received, including interference that may cause undesired operation.
CANADA (IC) STATEMENTS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
More Info
Frequently Asked Questions
Q: How do I reset the controller to factory settings?
Q: Can I customize the button mappings on the controller?
Documents / Resources
![]() | TE3 Button Arcade Controller |
References
- madcatz.commadcatz.com
- madcatz.comwww.madcatz.com
- P65Warnings.ca.govwww.p65warnings.ca.gov
- User Manualmanual.tools

