Billy Blade and Comb Instruction Manual

billy-logo

Billy Blade and CombBilly Blade and-Comb-nstruction-product

Snap-in Blade Assembly

  • Step 1: Insert part A into slot B with the blade facing upwardBilly Blade and-Comb-nstruction-fig1 (1)
  • Step 2: Push the cutters back until you hear a click.Billy Blade and-Comb-nstruction-fig1 (2)

Snap-in Blade Disassembly

  • Press the replaceable blade tabs and push forward in the direction of the arrows. Billy Blade and-Comb-nstruction-fig1 (3)
  • Dispose of broken blades immediately. Replace blades every three months. Available at billy-trimmer.com

Adjustable Guide Combs

The Billy comes with 2 adjustable guide combs for preferred hair lengths.Billy Blade and-Comb-nstruction-fig1 (4)

Attaching or Removing Combs

To attach
Turn off the device and push both ends of the comb attachment into place. Be careful not to install it backward.

To remove
Detach the comb gently according to the grooming head’s design.Billy Blade and-Comb-nstruction-fig1 (5)

Comb removal tip
Open one side of the comb carefully. Pull lightly to avoid damage.Billy Blade and-Comb-nstruction-fig1 (6)

Maintenance

Snap-in Blade Cleaning

  • Step 1: Remove hair scraps using the cleaning brush.Billy Blade and-Comb-nstruction-fig1 (7)
  • Step 2: Press the outer frame handles in the direction of the arrows and clean the hair trapped between the blades.Billy Blade and-Comb-nstruction-fig1 (8)

Body Cleaning

  • Step 3: Brush off hair scraps from the replaceable blade slots.Billy Blade and-Comb-nstruction-fig1 (9)
  • Step 4: Wipe the exterior of the trimmer with a soft, damp cloth.

Note
Always turn off the trimmer before cleaning by pressing the power button. The ceramic blades are designed to resist rusting. Regular maintenance is recommended for optimal performance and extended lifespan.

Tips

Fully charge the trimmer before use. Travel Lock Function
 When the device is on, press and hold the power button for 3 seconds to activate the travel lock. The travel lock indicator light will turn on. To deactivate, press and hold the power button again for 3 seconds. The indicator will turn off.

  • Charge the device for about 2 hours before the first use to ensure a full battery.
  • Do not overcharge the device.
  • Unplug it once fully charged to preserve battery life.
  • When traveling, activate the travel lock feature to prevent accidental activation.
  • If a blade breaks, replace it immediately to ensure safety.
  • Store the device at room temperature and avoid very humid or excessively hot environments.

FAQs

How often should I replace the blades?

Replace the blades every three months for optimal performance.

How do I activate the travel lock?

Press and hold the power button for 3 seconds to activate or deactivate the travel lock.

What should I do if the trimmer gets wet?

Wipe the exterior with a soft, damp cloth and ensure it is dry before storing.

Can I clean the blades with water?

No, use the cleaning brush to remove hair scraps and avoid using water directly on the blades.

Documents / Resources

PDF thumbnailBlade and Comb
Instruction Manual · Blade and Comb, and Comb, Comb

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.